GLUNZ & JENSEN 68/85 Plate Processor Service Manual
Plate Processor+ 68/85 Polymer is a device that processes polymer offset plates. It has a plate width of 200-675 mm (7.9-26.6”) and a plate length of 274-1100 mm (10.8-43.3”). The plate thickness must be between 0.15-0.30 mm (0.006-0.012”). The plate speed is 40-140 cm/min (15.7-55.1“/min).
advertisement
InterPlater 85/135 HD
Service Manual
Plate Processor+ 68/85
Polymer
Service Manual
Plate Processor+ 68/85
Polymer
Service manual
Plate Processor+ 68/85
Polymer
Edition BA, November 2012
This book has part No. 10061362
Plate Processor+ 68/85
Polymer
Edition BA, November 2012
This book has part No. 10061362
# This manual is for Service Technicians only.
The directions given must not be followed by unauthorized personnel.
Always read the Safety Instruction Manual part No 21741 before installing or
operating the equipment.
This manual is published by: GLUNZ & JENSEN A/S
Selandia Park 1
DK-4100 Ringsted
Denmark
Phone:+45 57 68 81 81
E-mail: [email protected]
Internet: www.glunz-jensen.com
Copyright © 2011 by GLUNZ & JENSEN A/S.
Service Manual - Plate Processors 68/85 1244
0-4
The directions given must not be followed by unauthorized personnel.
Always read the Safety Instruction Manual part No 21741 before installing or
operating the equipment.
This manual is published by: GLUNZ & JENSEN A/S
Selandia Park 1
DK-4100 Ringsted
Denmark
Phone:+45 57 68 81 81
E-mail: [email protected]
Internet: www.glunz-jensen.com
Copyright © 2011 by GLUNZ & JENSEN A/S.
Service Manual - Plate Processors 68/85 1244
0-4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
advertisement
Key Features
- Polymer offset plates processing
- Plate width 200-675 mm (7.9-26.6”)
- Plate length 274-1100 mm (10.8-43.3”)
- Plate thickness 0.15-0.30 mm (0.006-0.012”)
- Plate speed 40-140 cm/min (15.7-55.1“/min)
Related manuals
Frequently Answers and Questions
What is the minimum and maximum plate width?
The minimum plate width is 200 mm (7.9”), and the maximum is 675 mm (26.6”).
What is the maximum plate length?
The maximum plate length is 1100 mm (43.3”).
What is the minimum and maximum plate thickness?
The minimum plate thickness is 0.15 mm (0.006”), and the maximum is 0.30 mm (0.012”).
What is the maximum plate speed?
The maximum plate speed is 140 cm/min (55.1“/min).
advertisement
