CTcoin Pelican 301+ 24V, 305+ 24V, 309+ 24V coin counting and sorting machine USER'S MANUAL
Below you will find brief information for coin counting and sorting machine Pelican 301+ 24V, coin counting and sorting machine Pelican 305+ 24V, coin counting and sorting machine Pelican 309+ 24V. This machine is a coin counting and sorting machine. It counts up to 20 different denominations. The machine has one box for rejected coins, and can have a printer to print receipts/tickets. The installed display on the keyboard guides the personal to serve the machine. The machine has to be turned off and unplugged, before performing any maintenance that requires a person to operate inside the machine. Keep the work area clear, cluttered areas invite injuries. Install the machine up to a wall with about 10 cm to the wall, this way it is possible to get access to the main switches and the mains plug.
advertisement
USER’S MANUAL
for
coin counting and sorting machine
Pelican type 301+ 24V
Pelican 305 + 24V and Pelican 309 + 24V
Version 13.01.2011
Produced by:
CTcoin A/S
Helsingborggade 9
DK-5000 Odense C
Denmark
Phone. + 45 63 12 75 73
Fax: +45 63 12 75 71
E-mail: [email protected]
Internet: www.ctcoin.com
for
coin counting and sorting machine
Pelican type 301+ 24V
Pelican 305 + 24V and Pelican 309 + 24V
Version 13.01.2011
Produced by:
CTcoin A/S
Helsingborggade 9
DK-5000 Odense C
Denmark
Phone. + 45 63 12 75 73
Fax: +45 63 12 75 71
E-mail: [email protected]
Internet: www.ctcoin.com
2
TABLE OF CONTENT
1. WARNING!! 4
2. DESCRIPTION 4
3. TECHNICAL DATA 5
4. DETERMINING USE 5
5. FUNCTION 6
6. SAFETY 7
7. SYMBOL AND REFERENCE DECLARATION 8
8. CLEANING 9
9. SERVICE 10
7. OUTLINE OF THE KEYBOARD 11
8. START-UP 12
8.1 Transfer to Memory “M+” 13
8.2 Printout of the counted coins 13
8.3 Cancelling of the actual counting 13
8.4 Grand total 13
8.5 Handling of bag stops 14
8.6 Rail stop 15
9. PROGRAMMING (0-11) 16
9.0 Escape 16
9.1 Separate coins 16
9.2 Set bag stop (Can also be used as drawer stop for 301/305/309) 17
9.3 Date and time 20
9.4 Transactions 20
9.5 Set fee 22
9.6 Reset paper length 23
9.7 Rate of exchange 24
9.8 Stop amount 25
9.9 Cleaning Machine 26
9.10 Choose currencystate 27
9.11 Papercut 27
9.12 Chose legal coins 28
TABLE OF CONTENT
1. WARNING!! 4
2. DESCRIPTION 4
3. TECHNICAL DATA 5
4. DETERMINING USE 5
5. FUNCTION 6
6. SAFETY 7
7. SYMBOL AND REFERENCE DECLARATION 8
8. CLEANING 9
9. SERVICE 10
7. OUTLINE OF THE KEYBOARD 11
8. START-UP 12
8.1 Transfer to Memory “M+” 13
8.2 Printout of the counted coins 13
8.3 Cancelling of the actual counting 13
8.4 Grand total 13
8.5 Handling of bag stops 14
8.6 Rail stop 15
9. PROGRAMMING (0-11) 16
9.0 Escape 16
9.1 Separate coins 16
9.2 Set bag stop (Can also be used as drawer stop for 301/305/309) 17
9.3 Date and time 20
9.4 Transactions 20
9.5 Set fee 22
9.6 Reset paper length 23
9.7 Rate of exchange 24
9.8 Stop amount 25
9.9 Cleaning Machine 26
9.10 Choose currencystate 27
9.11 Papercut 27
9.12 Chose legal coins 28
3
10. SPECIAL FUNCTIONS AND SET-UPS 29
10.0 Function codes (Grand total functions) 29
10.1 Tubing function 36
10.2 Quick changing of bags 37
10.3 Delay bag stops 38
10.4 Cashier mode 38
10.5 Self-service (automatic transfer to Memory) 40
10.6 Text on external display 40
10.7 Text on printout 40
10.8 Reset counting number 40
10.9 Note value 40
11. MIDDLE DRAWER STOP FUNCTION 46
12. LOCK FUNCTIONS 47
12.0 Lock description 47
12.1 Lock Function 1: Lock on drawers without code 47
12.2 Lock function 1: Lock on drawers with code 48
12.3 Lock function 2: Lock on reject plate 49
12.4 Lock function 2: Reject plate 49
10. SPECIAL FUNCTIONS AND SET-UPS 29
10.0 Function codes (Grand total functions) 29
10.1 Tubing function 36
10.2 Quick changing of bags 37
10.3 Delay bag stops 38
10.4 Cashier mode 38
10.5 Self-service (automatic transfer to Memory) 40
10.6 Text on external display 40
10.7 Text on printout 40
10.8 Reset counting number 40
10.9 Note value 40
11. MIDDLE DRAWER STOP FUNCTION 46
12. LOCK FUNCTIONS 47
12.0 Lock description 47
12.1 Lock Function 1: Lock on drawers without code 47
12.2 Lock function 1: Lock on drawers with code 48
12.3 Lock function 2: Lock on reject plate 49
12.4 Lock function 2: Reject plate 49
4
1. WARNING!!
When using the machine basic safety precautions should always be followed to reduce the
risk of fire, electric shock and personal injury including the following.
Read all these instructions before attempting to operate this machine and act on these
instructions
2. DESCRIPTION
The Pelican 309 + 24V, 305 + 24V and Pelican 301 + 24V is equipped with one on/off
main switch, placed close to the main plug on the backside of the machine. The machine
is connected to the network with the accompanying lead with plugs in both ends.
The machine is also equipped with a keyboard with different function. Among them is
START and PRINT buttons.
The machine has two interface ports RS 232.
Port one is for the internal printer.
Port two is for external printer or PC.
The machine’s functions are directed from the keyboard placed on the front side of the
Pelican.
For shipping the 309 + 24V is packed in a cardboard crate with the dimensions: (80 x 45 x
58 cm) and placed on a wooden pallet.
gross weight: 30 kg.
For shipping the 305 + 24V is packed in a cardboard crate with the dimensions: (62 x 44 x
58 cm) and placed on a wooden pallet.
gross weight: 25 kg.
For shipping the 301 + 24V is packed in a cardboard crate with the dimensions: (47 x 44 x
58 cm) and placed on a wooden pallet.
gross weight: 19 kg.
Unpacking of the machine: Place the box on a table (this must be done by two people as
the machine net weight is 30 kg – 25 kg and 19 kg) and turn the front against yourselves.
Then cut the tape that holds the box together. Then pull the machine out of the box
together with the protection foam. Remove the protection foam sitting around the machine,
without breaking it, and store it in the cardboard crate. It is prescribed that personnel
use safety boots during transportation works. Store the cardboard crate, and
protection for the machine. This can be used again if the machine has to be moved to
another building.
Storing and transport of the machine: To store the machine on a storeroom/container or
truck, nothing must be placed on top of the machine as the machine can get damaged.
The temperature of the storeroom, container or truck, must not go under -20 ºC, and not
over +60 ºC Humidity 90%. Other temperatures can damage the machine.
By transport of the machine in container or by truck the machine have to be packed on a
pallet. With the cardboard crate and protection foam mounted. It is prescribed that
personnel use safety boots during transportation works.
Absolute maximum ratings storage: -20 ºC +60 ºC 90%RH
1. WARNING!!
When using the machine basic safety precautions should always be followed to reduce the
risk of fire, electric shock and personal injury including the following.
Read all these instructions before attempting to operate this machine and act on these
instructions
2. DESCRIPTION
The Pelican 309 + 24V, 305 + 24V and Pelican 301 + 24V is equipped with one on/off
main switch, placed close to the main plug on the backside of the machine. The machine
is connected to the network with the accompanying lead with plugs in both ends.
The machine is also equipped with a keyboard with different function. Among them is
START and PRINT buttons.
The machine has two interface ports RS 232.
Port one is for the internal printer.
Port two is for external printer or PC.
The machine’s functions are directed from the keyboard placed on the front side of the
Pelican.
For shipping the 309 + 24V is packed in a cardboard crate with the dimensions: (80 x 45 x
58 cm) and placed on a wooden pallet.
gross weight: 30 kg.
For shipping the 305 + 24V is packed in a cardboard crate with the dimensions: (62 x 44 x
58 cm) and placed on a wooden pallet.
gross weight: 25 kg.
For shipping the 301 + 24V is packed in a cardboard crate with the dimensions: (47 x 44 x
58 cm) and placed on a wooden pallet.
gross weight: 19 kg.
Unpacking of the machine: Place the box on a table (this must be done by two people as
the machine net weight is 30 kg – 25 kg and 19 kg) and turn the front against yourselves.
Then cut the tape that holds the box together. Then pull the machine out of the box
together with the protection foam. Remove the protection foam sitting around the machine,
without breaking it, and store it in the cardboard crate. It is prescribed that personnel
use safety boots during transportation works. Store the cardboard crate, and
protection for the machine. This can be used again if the machine has to be moved to
another building.
Storing and transport of the machine: To store the machine on a storeroom/container or
truck, nothing must be placed on top of the machine as the machine can get damaged.
The temperature of the storeroom, container or truck, must not go under -20 ºC, and not
over +60 ºC Humidity 90%. Other temperatures can damage the machine.
By transport of the machine in container or by truck the machine have to be packed on a
pallet. With the cardboard crate and protection foam mounted. It is prescribed that
personnel use safety boots during transportation works.
Absolute maximum ratings storage: -20 ºC +60 ºC 90%RH
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
advertisement
Key Features
- Counts up to 20 coin denominations
- Has a box for rejected coins
- Can print receipts/tickets
- Has a display on the keyboard to guide the user
- Automatic voltage regulator
- Bag stop function
- Tubing function
Related manuals
Frequently Answers and Questions
How many coin denominations can this machine count?
Up to 20 different denominations.
What happens to rejected coins?
Rejected coins are placed in a separate box.
Can this machine print receipts?
Yes, it can have a printer to print receipts or tickets.
How does the machine guide the user?
The keyboard has a display that provides instructions.
What are the safety precautions when using this machine?
The machine must be turned off and unplugged before performing any maintenance that requires working inside the machine. Keep the work area clear and avoid clutter.
How do I install the machine?
Install the machine up to a wall with about 10 cm to the wall, this allows access to the main switches and the mains plug.
What is the bag stop function?
When a pre-programmed bag stop is reached, the machine stops, makes a beep sound and the display will show: "Bag 1 filled up". You can then change the bag and press "ENTER" to restart.
What is the tubing function?
This function allows you to pack the sorted coins into paper or plastic tubes. You can select the coin to be tubed and set the number of coins per tube.
How do I change the bag when it is full?
The display will show "Bag 1 full" and you can change the bag. Press the bag number and then "ENTER" for each full bag.
What is the delay bag stops function?
This function allows the machine to continue counting even when a bag is full. The total counting will be reset and there will not be any message regarding full bags.
advertisement
