Siemens 840D sl SINUMERIK, SINUMERIK Integrate Run MyVNCK Function Manual
Below you will find brief information for SINUMERIK 840D sl. This document provides information about the VNCK system, its architecture, installation, and deinstallation. It also covers system characteristics, interfaces, and how to use the VNCK system in a simulation environment. It provides a detailed explanation of different interfaces, including single NCU processing, VPLC processing, and NCU link processing. You can also find information about the VNCK license and more general information.
advertisement
General Information 1
System
Characteristics 2
Interface Functional
Description 3
VPLC Processing 4
NCU Link Processing 5
VNCK License 6
More General
Information
7
SINUMERIK 840D sl
SINUMERIK Integrate
Run MyVNCK
Reference
Function Manual
Valid for
Control Version
SINUMERIK 840D sl 4.5 SP2
Software
SINUMERIK Integrate Run MyVNCK 4.5 SP1
05/2013
System
Characteristics 2
Interface Functional
Description 3
VPLC Processing 4
NCU Link Processing 5
VNCK License 6
More General
Information
7
SINUMERIK 840D sl
SINUMERIK Integrate
Run MyVNCK
Reference
Function Manual
Valid for
Control Version
SINUMERIK 840D sl 4.5 SP2
Software
SINUMERIK Integrate Run MyVNCK 4.5 SP1
05/2013
Legal information
Warning notice system
This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent
damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert
symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are
graded according to the degree of danger.
DANGER
indicates that death or severe personal injury will result if proper precautions are not taken.
WARNING
indicates that death or severe personal injury may result if proper precautions are not taken.
CAUTION
with a safety alert symbol, indicates that minor personal injury can result if proper precautions are not taken.
CAUTION
without a safety alert symbol, indicates that property damage can result if proper precautions are not taken.
NOTICE
indicates that an unintended result or situation can occur if the relevant information is not taken into account.
If more than one degree of danger is present, the warning notice representing the highest degree of danger will
be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to
property damage.
Qualified Personnel
The product/system described in this documentation may be operated only by personnel qualified for the specific
task in accordance with the relevant documentation, in particular its warning notices and safety instructions.
Qualified personnel are those who, based on their training and experience, are capable of identifying risks and
avoiding potential hazards when working with these products/systems.
Proper use of Siemens products
Note the following:
WARNING
Siemens products may only be used for the applications described in the catalog and in the relevant technical
documentation. If products and components from other manufacturers are used, these must be recommended
or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and
maintenance are required to ensure that the products operate safely and without any problems. The permissible
ambient conditions must be complied with. The information in the relevant documentation must be observed.
Trademarks
All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication
may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and software
described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the
information in this publication is reviewed regularly and any necessary corrections are included in subsequent
editions.
Siemens AG
Industry Sector
Postfach 48 48
90026 NÜRNBERG
GERMANY
Ⓟ 05/2013 Technical data subject to change
Copyright © Siemens AG 2004 - 2013
Technical data subject to change
Warning notice system
This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent
damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert
symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are
graded according to the degree of danger.
DANGER
indicates that death or severe personal injury will result if proper precautions are not taken.
WARNING
indicates that death or severe personal injury may result if proper precautions are not taken.
CAUTION
with a safety alert symbol, indicates that minor personal injury can result if proper precautions are not taken.
CAUTION
without a safety alert symbol, indicates that property damage can result if proper precautions are not taken.
NOTICE
indicates that an unintended result or situation can occur if the relevant information is not taken into account.
If more than one degree of danger is present, the warning notice representing the highest degree of danger will
be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to
property damage.
Qualified Personnel
The product/system described in this documentation may be operated only by personnel qualified for the specific
task in accordance with the relevant documentation, in particular its warning notices and safety instructions.
Qualified personnel are those who, based on their training and experience, are capable of identifying risks and
avoiding potential hazards when working with these products/systems.
Proper use of Siemens products
Note the following:
WARNING
Siemens products may only be used for the applications described in the catalog and in the relevant technical
documentation. If products and components from other manufacturers are used, these must be recommended
or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and
maintenance are required to ensure that the products operate safely and without any problems. The permissible
ambient conditions must be complied with. The information in the relevant documentation must be observed.
Trademarks
All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication
may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and software
described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the
information in this publication is reviewed regularly and any necessary corrections are included in subsequent
editions.
Siemens AG
Industry Sector
Postfach 48 48
90026 NÜRNBERG
GERMANY
Ⓟ 05/2013 Technical data subject to change
Copyright © Siemens AG 2004 - 2013
Technical data subject to change
Run MyVNCK, Reference
Function Manual, 05/2013 3
Preface
SINUMERIK documentation
The SINUMERIK documentation is organized in the following categories:
• General documentation
• User documentation
• Manufacturer/service documentation
Additional information
You can find information on the following topics under the link
www.siemens.com/motioncontrol/docu:
• Ordering documentation/overview of documentation
• Additional links to download documents
• Using documentation online (find and search in manuals/information)
If you have any questions regarding the technical documentation (e.g. suggestions,
corrections) then please send an e-mail to the following address:
mailto:[email protected]
My Documentation Manager (MDM)
Under the following link you will find information to individually compile OEM-
specific machine documentation based on the Siemens content:
MDM www.siemens.com/mdm
Training
For information about the range of training courses, refer under:
• SITRAIN www.siemens.com/sitrain - training courses from Siemens for
products, systems and solutions in automation technology
• SinuTrain www.siemens.com/sinutrain - training software for SINUMERIK
FAQs
You can find Frequently Asked Questions in the Service&Support pages
Product Support www.siemens.com/automation/service&support
SINUMERIK
You can find information on SINUMERIK under the following link:
www.siemens.com/sinumerik
Function Manual, 05/2013 3
Preface
SINUMERIK documentation
The SINUMERIK documentation is organized in the following categories:
• General documentation
• User documentation
• Manufacturer/service documentation
Additional information
You can find information on the following topics under the link
www.siemens.com/motioncontrol/docu:
• Ordering documentation/overview of documentation
• Additional links to download documents
• Using documentation online (find and search in manuals/information)
If you have any questions regarding the technical documentation (e.g. suggestions,
corrections) then please send an e-mail to the following address:
mailto:[email protected]
My Documentation Manager (MDM)
Under the following link you will find information to individually compile OEM-
specific machine documentation based on the Siemens content:
MDM www.siemens.com/mdm
Training
For information about the range of training courses, refer under:
• SITRAIN www.siemens.com/sitrain - training courses from Siemens for
products, systems and solutions in automation technology
• SinuTrain www.siemens.com/sinutrain - training software for SINUMERIK
FAQs
You can find Frequently Asked Questions in the Service&Support pages
Product Support www.siemens.com/automation/service&support
SINUMERIK
You can find information on SINUMERIK under the following link:
www.siemens.com/sinumerik
Preface
4 Run MyVNCK, Reference
Function Manual, 05/2013
Target group
This publication is intended for project engineers, programmers, technologists (of
machine manufacturers), and system startup engineers (of systems/machines).
Benefits
The Function Manual describes the functions so that the target group is familiar
with and can select them. It provides the target group with the information required
to implement the functions.
Utilization phase: Planning and configuration phase, implementation phase, setup
and commissioning phase
Standard version
Extensions or changes made by the machine manufacturer are documented by the
machine manufacturer.
Other functions not described in this documentation might be executable in the
control. This does not, however, represent an obligation to supply such functions
with a new control or when servicing.
Further, for the sake of simplicity, this documentation does not contain all detailed
information about all types of the product and cannot cover every conceivable case
of installation, operation or maintenance.
Technical Support
You can find telephone numbers for other countries for technical support in the
Internet under "Contact" www.siemens.com/automation/service&support.
SINUMERIK Internet address
http://www.siemens.com/sinumerik
4 Run MyVNCK, Reference
Function Manual, 05/2013
Target group
This publication is intended for project engineers, programmers, technologists (of
machine manufacturers), and system startup engineers (of systems/machines).
Benefits
The Function Manual describes the functions so that the target group is familiar
with and can select them. It provides the target group with the information required
to implement the functions.
Utilization phase: Planning and configuration phase, implementation phase, setup
and commissioning phase
Standard version
Extensions or changes made by the machine manufacturer are documented by the
machine manufacturer.
Other functions not described in this documentation might be executable in the
control. This does not, however, represent an obligation to supply such functions
with a new control or when servicing.
Further, for the sake of simplicity, this documentation does not contain all detailed
information about all types of the product and cannot cover every conceivable case
of installation, operation or maintenance.
Technical Support
You can find telephone numbers for other countries for technical support in the
Internet under "Contact" www.siemens.com/automation/service&support.
SINUMERIK Internet address
http://www.siemens.com/sinumerik
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
advertisement
Key Features
- VNCK system architecture
- Installation and deinstallation guide
- System characteristics and interfaces
- Single NCU processing
- VPLC processing
- NCU link processing
- VNCK license information
- General information
- Interface functional description
- VPLC processing
Related manuals
Frequently Answers and Questions
What is VNCK?
VNCK (Virtual NC Kernel) is a software package that provides a simulated environment of the SINUMERIK 840D sl kernel, allowing developers and engineers to test and debug their applications without requiring a physical machine.
How is the VNCK system architected?
The VNCK system consists of several components, including a VNCK Server that offers interfaces for all commands to the VNCK, and a cross-compiled version of a real target SINUMERIK 840D sl system that handles operation with the kernel. The system also uses several original SINUMERIK 840D sl HMI servers to reduce software development work and ensure correct handling.
What are the different types of VNCK processing?
The VNCK system supports three types of processing: single NCU processing, VPLC processing, and NCU link processing. Single NCU processing controls a single NCU, VPLC processing allows simulation to access and control a VPLC instance inside the VNCK system, and NCU link processing handles link units as control instances of NCU units synchronized via ncuLink.
How can I install VNCK?
You can install VNCK by running setup.exe from the VNCK CD. You can choose to install VNCK with runtime components, OEM/ISV components, or your custom component definition. To uninstall VNCK, use Start → Settings → Control Panel → Add or Remove Programs and choose uninstallation of VNCK V04.05.01.00.
advertisement