Berghof CEDIO-P 24/24/2 Cell Controller User Handbook
The CEDIO-P 24/24/2 is a compact and versatile cell controller designed for industrial automation applications. It features a powerful CPU, internal flash memory for program storage, and a wide range of interfaces for connecting to other devices. The CEDIO-P 24/24/2 is well-suited for controlling machines, processes, and systems in various industries.
advertisement
CEDIO-P 24/24/2
Cell Controller
V.1.01
User Handbook
Cell Controller
V.1.01
User Handbook
Copyright © Berghof Automationstechnik GmbH
Reproduction and duplication of this document and utilisation and communication of its content is
prohibited, unless with our express permission.
All rights reserved. Damages will be payable in case of infringement.
Disclaimer
The content of this publication was checked for compliance with the hardware and software described.
However, discrepancies may arise, therefore no liability is assumed regarding complete compliance.
The information in this document will be checked regularly and all necessary corrections will be included
in subsequent editions. Suggestions for improvements are always welcome.
Subject to technical changes.
Trademark
CANtrol® // is a registered trademark of Berghof Automationstechnik GmbH
General Information on this Manual
Content:
This manual describes the CANtrol module CEDOP-P 24/24/2 and its modifications. The product-
related information contained herein was up to date at the time of publication of this manual.
Completeness:
This manual is complete only in conjunction with the user manual entitled
„Introduction
to CANtrol Automation System‟
and the product-related hardware or software user manuals required for the particular application.
Standards:
The CANtrol automation system, its components and its use are based on International Standard
IEC 61131 Parts 1 to 4 (EN 61131 Parts 1 to 3 and Supplementary Sheet 1).
Supplementary Sheet 1 of EN 61131 (IEC 61131-4) entitled „User Guidelines‟ is of particular importance
for the user.
Order numbers:
Please see the relevant product overview in the „Introduction to CANtrol Automation System‟ manual for
a list of available products and their order numbers.
Ident. No.: 2813620
You can reach us at:
Berghof Automationstechnik GmbH
Harretstr. 1
72800 Eningen / Germany
Telefon: +49 7121 / 894-0
Telefax: +49 7121 / 894-100
E-Mail: [email protected]
www.berghof.com
Berghof Automationstechnik GmbH works in accordance with DIN EN ISO 9001
Reproduction and duplication of this document and utilisation and communication of its content is
prohibited, unless with our express permission.
All rights reserved. Damages will be payable in case of infringement.
Disclaimer
The content of this publication was checked for compliance with the hardware and software described.
However, discrepancies may arise, therefore no liability is assumed regarding complete compliance.
The information in this document will be checked regularly and all necessary corrections will be included
in subsequent editions. Suggestions for improvements are always welcome.
Subject to technical changes.
Trademark
CANtrol® // is a registered trademark of Berghof Automationstechnik GmbH
General Information on this Manual
Content:
This manual describes the CANtrol module CEDOP-P 24/24/2 and its modifications. The product-
related information contained herein was up to date at the time of publication of this manual.
Completeness:
This manual is complete only in conjunction with the user manual entitled
„Introduction
to CANtrol Automation System‟
and the product-related hardware or software user manuals required for the particular application.
Standards:
The CANtrol automation system, its components and its use are based on International Standard
IEC 61131 Parts 1 to 4 (EN 61131 Parts 1 to 3 and Supplementary Sheet 1).
Supplementary Sheet 1 of EN 61131 (IEC 61131-4) entitled „User Guidelines‟ is of particular importance
for the user.
Order numbers:
Please see the relevant product overview in the „Introduction to CANtrol Automation System‟ manual for
a list of available products and their order numbers.
Ident. No.: 2813620
You can reach us at:
Berghof Automationstechnik GmbH
Harretstr. 1
72800 Eningen / Germany
Telefon: +49 7121 / 894-0
Telefax: +49 7121 / 894-100
E-Mail: [email protected]
www.berghof.com
Berghof Automationstechnik GmbH works in accordance with DIN EN ISO 9001
Berghof Automationstechnik CEDIO-P 24/24/2
CEDIO-P-24-24-2_HB_en_2D1362001ZD00.docx Seite 3
Update
Version Date Subject
1.0 05.07.10 First Version
1.01 22.07.10 Update figure 'Block diagram', 'View of module', Output schematic circuit
diagram, positive-switching' and chapter 'Analog outputs characteristics'.
CEDIO-P-24-24-2_HB_en_2D1362001ZD00.docx Seite 3
Update
Version Date Subject
1.0 05.07.10 First Version
1.01 22.07.10 Update figure 'Block diagram', 'View of module', Output schematic circuit
diagram, positive-switching' and chapter 'Analog outputs characteristics'.
CEDIO-P 24/24/2 Berghof Automation
Page 4 CEDIO-P-24-24-2_HB_en_2D1362001ZD00.docx
blank page
Page 4 CEDIO-P-24-24-2_HB_en_2D1362001ZD00.docx
blank page
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
advertisement
Key Features
- 400 MHz CPU
- 128 MB program memory (RAM), 32 MB program memory (Flash)
- 24 digital inputs, 24 digital outputs
- 2 analog outputs
- 1 Ethernet interface 10/100Base-T
- 1 USB interface
- 2 CAN interfaces
- 1 RS232 interface
- E-bus interface for expansion
Related manuals
Frequently Answers and Questions
How many digital inputs and outputs does the CEDIO-P 24/24/2 have?
The CEDIO-P 24/24/2 has 24 digital inputs and 24 digital outputs.
What is the maximum baud rate for the CAN interfaces?
The maximum baud rate for the CAN interfaces is 1 Mbit/s.
What is the purpose of the E-bus interface?
The E-bus interface allows you to connect up to 5 e-bus extension modules, such as QDIO or QAIO, to expand the I/O capabilities of the controller.
advertisement