ICOM IC-720A Owner Manual
ICOM IC-720A is a dual 10Hz step digital VFO transceiver that covers all the Amateur HF frequencies from 1.8MHz to 29.999.9MHz, including the new three bands. It offers not only SSB, but also AM, CW and RTTY. The 1C-720A has capabilities not only for an all amateur band transceiver but also for a general coverage receiver between 100KHz and 30MHz with thirty 1MHz segments. The Up-conversion system using a high side IF and Microcomputer Control System make these capabilities possible.
In addition to these, the low-pass filters switched by rotary relay and the band-pass filters selected by an electric signal from the BAND UP/DOWN button, make a no tune-up system.
Advertisement
Advertisement
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
Advertisement
Key features
Covers all Amateur HF frequencies from 1.8MHz to 29.999.9MHz
All mode operation: SSB, AM, CW, and RTTY
All solid state design for reliability and durability
General coverage receiver capability from 100KHz to 30MHz
Dual 10Hz step digital VFO for precise frequency control
Microcomputer Control System for enhanced functionality
No tune-up system for easy band changes
Built-in noise blanker and DSP for improved receive performance
Frequently asked questions
The ICOM IC-720A covers all Amateur HF frequencies from 1.8MHz to 29.999.9MHz, including the new three bands.
The ICOM IC-720A supports all mode operation, including SSB, AM, CW, and RTTY.
Yes, the ICOM IC-720A has a general coverage receiver capability from 100KHz to 30MHz.
The ICOM IC-720A uses a dual 10Hz step digital VFO for precise frequency control.
Yes, the ICOM IC-720A has a no tune-up system for easy band changes.