KingLucky X7 Bone Conductive Headphone User Manual
advertisement
X7 Bone Conduc�ve
Headphone
User Manual
Direc�ons To Use X7 Headphone
Power On
To press the power bu�on for 2 seconds �ll the LED indicator
blinks RED and BLUE alternately, the headphone is turned on
and ready for Bluetooth connec�on.
Bluetooth Connec�on
At the first �me to use, a�er the headphone is turned on, it
will be searched in the Bluetooth se�ngs mode of your
devices (mobile phone or music player). Then you will find
“X7” and select it in your Bluetooth devices found. When X7
is connected success, the blue indicator will blink slowly and
when music playing, the indicator will be turned off.
① Power ON/OFF &Volume Down ② Volume up
③ Microphone ④ Indicator ⑤ USB Charging port
Accessories List
1.X7 bone conduc�ve headphone
2.USB charging cable
3.Instruc�on manual
Power Off
To press the power bu�on for 3 seconds to turn off the
headphone.It also can be shut down automa�cally if there is
no pairing or connec�on for 180 seconds.
Low Power Alarm & Charging
Normally the mobile phone will display the headphone power
status. If the ba�ery voltage is lower than 3.4V, you will hear
the low power alarm for every 120 seconds. Once the ba�ery
voltage dropped to 3.2V, headphone will be turned off
automa�cally. Then please use the USB cable to plug into
power adaptor for charging.
Opera�on Instruc�on:
POWER ON/OFF, VOLUME DOWN
1.Push the bu�on for 2 seconds to turn on
2.Push the bu�on for 3 seconds to turn off
3.Double clicks for next song
4.Triple clicks for Volume Down
VOLUME UP
To play music:
1.Click for Play/Pause
2.Double clicks for previous song
3.Triple clicks for volume up (Beep sound when reach the max.
volume)
4.Push the bu�on for 2 seconds to call AI assistant (like “siri”)
To answer the call
5.Click for calling answer
6.Push bu�on for 2 seconds to dismiss the call
7.Click for conversa�on ended
8.Double clicks to end the call and answer third party call
Product Specifica�on
*Model name: X7
*Bluetooth version: 5.0
*Net weight: 31.5g
*Ba�ery capacity: 320mAH
*Power input: 5V1A
*Ba�ery charging �me: 2 hours
*Music playback: 12 hours at 70% volume
*Waterproof: IP55
*Transmission distance: 10 meters
*Protocol support: A2DP,AVRCP,HSP,HFP
Trouble Shoo�ng
1.Unable to turn on headphone
=>Please make sure the ba�ery was fully charged and
power bu�on was pressed on right posi�on.
2.Unable to connect headphone
=>Please make sure the indicator LED is on the status
of RED and BLUE blinking alternately. If the indicator
blink BLUE slowly, the headphone was connected by
other device. Please disconnect the device and try again.
3.Unable to reconnect headphone
=>please make sure Bluetooth on your device was turned
on.
4.Less transmission distance
=>Please make sure your Bluetooth version of device is
4.0 above. The old version Bluetooth may cause shorter
transmission distance.
Indicators Descrip�on
1.Alternate RED and BLUE : wai�ng for pairing
2.BLUE for 3 seconds then turned off: Bluetooth connected
3.RED: under power charging
4.BLUE: ba�ery is fully charged
Product Graphic and Accessories
Quality Inspector
Paired Device Replacement
Disconnect the Bluetooth of your current paired device, then
the headphone indicator will blink RED and BLUE alternately
again. Other devices can find “X7” and available for connec�on.
70在
IP55
Headphone
User Manual
Direc�ons To Use X7 Headphone
Power On
To press the power bu�on for 2 seconds �ll the LED indicator
blinks RED and BLUE alternately, the headphone is turned on
and ready for Bluetooth connec�on.
Bluetooth Connec�on
At the first �me to use, a�er the headphone is turned on, it
will be searched in the Bluetooth se�ngs mode of your
devices (mobile phone or music player). Then you will find
“X7” and select it in your Bluetooth devices found. When X7
is connected success, the blue indicator will blink slowly and
when music playing, the indicator will be turned off.
① Power ON/OFF &Volume Down ② Volume up
③ Microphone ④ Indicator ⑤ USB Charging port
Accessories List
1.X7 bone conduc�ve headphone
2.USB charging cable
3.Instruc�on manual
Power Off
To press the power bu�on for 3 seconds to turn off the
headphone.It also can be shut down automa�cally if there is
no pairing or connec�on for 180 seconds.
Low Power Alarm & Charging
Normally the mobile phone will display the headphone power
status. If the ba�ery voltage is lower than 3.4V, you will hear
the low power alarm for every 120 seconds. Once the ba�ery
voltage dropped to 3.2V, headphone will be turned off
automa�cally. Then please use the USB cable to plug into
power adaptor for charging.
Opera�on Instruc�on:
POWER ON/OFF, VOLUME DOWN
1.Push the bu�on for 2 seconds to turn on
2.Push the bu�on for 3 seconds to turn off
3.Double clicks for next song
4.Triple clicks for Volume Down
VOLUME UP
To play music:
1.Click for Play/Pause
2.Double clicks for previous song
3.Triple clicks for volume up (Beep sound when reach the max.
volume)
4.Push the bu�on for 2 seconds to call AI assistant (like “siri”)
To answer the call
5.Click for calling answer
6.Push bu�on for 2 seconds to dismiss the call
7.Click for conversa�on ended
8.Double clicks to end the call and answer third party call
Product Specifica�on
*Model name: X7
*Bluetooth version: 5.0
*Net weight: 31.5g
*Ba�ery capacity: 320mAH
*Power input: 5V1A
*Ba�ery charging �me: 2 hours
*Music playback: 12 hours at 70% volume
*Waterproof: IP55
*Transmission distance: 10 meters
*Protocol support: A2DP,AVRCP,HSP,HFP
Trouble Shoo�ng
1.Unable to turn on headphone
=>Please make sure the ba�ery was fully charged and
power bu�on was pressed on right posi�on.
2.Unable to connect headphone
=>Please make sure the indicator LED is on the status
of RED and BLUE blinking alternately. If the indicator
blink BLUE slowly, the headphone was connected by
other device. Please disconnect the device and try again.
3.Unable to reconnect headphone
=>please make sure Bluetooth on your device was turned
on.
4.Less transmission distance
=>Please make sure your Bluetooth version of device is
4.0 above. The old version Bluetooth may cause shorter
transmission distance.
Indicators Descrip�on
1.Alternate RED and BLUE : wai�ng for pairing
2.BLUE for 3 seconds then turned off: Bluetooth connected
3.RED: under power charging
4.BLUE: ba�ery is fully charged
Product Graphic and Accessories
Quality Inspector
Paired Device Replacement
Disconnect the Bluetooth of your current paired device, then
the headphone indicator will blink RED and BLUE alternately
again. Other devices can find “X7” and available for connec�on.
70在
IP55
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could
void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The device can be used in
portable exposure condition without restriction.
FCC Statement
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could
void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The device can be used in
portable exposure condition without restriction.
FCC Statement
advertisement
Related manuals
advertisement
