OREI UHD66-EXB132-K 4K 6x4 HDMI HDBaseT Matrix User Manual

PDF Download
Document
OREI UHD66-EXB132-K 4K 6x4 HDMI HDBaseT Matrix User Manual | Manualzz

Advertisement

Advertisement

VER:2.1
Thank you for purchasing this product
For optimum performance and safety, please read these instructions carefully
before connecting, operating or adjusting this product. Please keep this manual
for future reference.
Surge protection device recommended
Table of Contents
1/18
This product contains sensitive electrical components that may be damaged
by electrical spikes, surges, electric shock, lightning strikes, etc. Use of surge
protection systems is highly recommended in order to protect and extend the
service lifeof your equipment.
The 6x6 HDMI/HDBaseT matrix supports the transmission of video (resolutions
up to 4K2K@60Hz 4:4:4, HDCP 2.2, HDMI2.0) and multi-channel digital audio
from 6 HDMI sources to 4 HDBaseT outputs and 2 independent HDMI 2.0 outputs.
HDBaseT outputs allow transmission via a single CAT5e/6/7 cable up to 230 feet/
70 meters and the independent HDMI outputs support cable lengths of up to
33 feet/10 meters. This matrix built-in an independent 18x12 digital audio matrix
with volume/delay tuning and also supports high resolution digital audio formats
such as LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus, Dolby Atmos and DTS-
HD Master Audio as well as 3D video content pass-through. The matrix can be
easily controlled via the front panel button, IR, RS-232, Telnet and Web GUI.
HDMI 2.0b (18Gbps), HDCP 2.2 and DVI compliant
Routes 6 HDMI sources to 6 displays including 4 HDBaseT outputs and
2 independent or mirrored HDMI outputs
Supports resolutions up to 4K@60 (YUV 4:4:4) on all HDMI ports
Supports automatic 4K@60 (YUV 4:4:4) to 4K@60 (YUV 4:2:0) conversion
for all HDBaseT outputs
4K/2K & 4K UHD signals can be transmitted up to 130 feet/40 meters and
1080P up to 230 feet/70 meters via CAT5e/6/7
Supports pass-through of HD audio formats: LPCM 2/5.1/7.1CH, Dolby
Digital 2/5.1CH, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS-HD
Master Audio and DTS X
Built-in independent audio matrix with Volume, Mute, and Audio delay
adjustment for lip-sync (LPCM only)
HDR10, Dolby Vision, ARC, CEC and smart EDID management supported
24V POC on all HDBaseT ports
2/18
Control is via on-panel Button, IR, RS-232, Telnet and Web GUI
1U rack mounted design with aluminum front panel housing
1 x 6x6 Matrix Unit
4 x 70M HDBaseT Receivers
7 x Wideband IR Blaster cables
8 x Wideband IR Receiver cables
1 x RS-232 male to female cable
1 x AC power cable
1x Remote Controller
1 x User Manual
3/18
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19

Advertisement

Preparing document for printing…
0%