Delta-T DL-MKT-Mounting-Kit User Manual
Delta-T DL-MKT-Mounting-Kit is a universal mounting kit designed for secure attachment of Delta-T's GP2, GP1, and DL6 data loggers to vertical pipes or posts. This kit provides a reliable and sturdy mounting solution for various applications where data loggers need to be securely installed.
advertisement
V1.2 15/2/2018 Page 1 of 1
130 Low Road, Burwell, Cambridge, CB25 OEJ, UK
[email protected] www.delta-t.co.uk
Tel +44 (0) 1638 742922
DL-MKT Data Logger Mounting Kit
The Universal Mounting Kit is a 2mm thick flat stainless steel plate with U-
bolts suitable for attaching to a 42 mm (1⅝ inch) diameter verƟcal pipe or
post and with nuts and bolts for Delta-T GP2, GP1 and DL6 data loggers.
Tools needed
3mm Hex (Allen) key (for mounting bolts)
7mm spanner (for loggers GP2, GP1, DL6)
8mm spanner (for BX1 modem)
13mm spanner (for the tube clamps)
130 Low Road, Burwell, Cambridge, CB25 OEJ, UK
[email protected] www.delta-t.co.uk
Tel +44 (0) 1638 742922
DL-MKT Data Logger Mounting Kit
The Universal Mounting Kit is a 2mm thick flat stainless steel plate with U-
bolts suitable for attaching to a 42 mm (1⅝ inch) diameter verƟcal pipe or
post and with nuts and bolts for Delta-T GP2, GP1 and DL6 data loggers.
Tools needed
3mm Hex (Allen) key (for mounting bolts)
7mm spanner (for loggers GP2, GP1, DL6)
8mm spanner (for BX1 modem)
13mm spanner (for the tube clamps)
advertisement
Key Features
- Stainless steel plate
- Universal mounting
- Fits 42mm pipes
- Secure attachment
- Compatible with Delta-T loggers
Related manuals
Frequently Answers and Questions
What data loggers are compatible with this mounting kit?
The DL-MKT Mounting Kit is compatible with Delta-T GP2, GP1, and DL6 data loggers.
What tools are required for installation?
For installation, you will need a 3mm Hex (Allen) key, a 7mm spanner, an 8mm spanner, and a 13mm spanner.
What is the material of the mounting plate?
The mounting plate is made of 2mm thick flat stainless steel.
advertisement
