HOGGI SWINGBO 2 XL Wheelchair Owner's Manual
Hoggi SWINGBO 2 XL is a tilting wheelchair designed for individual indoor and outdoor use by persons who are unable to walk or have a walking impediment. It features an aluminium rigid frame with centre of gravity tilt in space, adjustable wheelbase, wheel locks, detachable rear wheels, adjustable seat height, and a choice of seat widths. The maximum load capacity is 100 kg.
advertisement
en
SWINGBO 2 XL
User manual
Partnerschaft für mobile Kinder
SWINGBO 2 XL
User manual
Partnerschaft für mobile Kinder
2
1 Model identification & basic configuration___________________________________________ 4
1.1 Model identification __________________________________________________________ 4
1.2 Basic configuration __________________________________________________________ 4
1.3 Environmental conditions _____________________________________________________ 4
2 Common information ____________________________________________________________ 5
2.1 Preface ___________________________________________________________________ 5
2.2 Application_________________________________________________________________ 5
2.3 Declaration of conformity______________________________________________________ 5
2.4 Terms of warranty ___________________________________________________________ 5
2.5 Servicing and repairs_________________________________________________________ 5
2.6 Duty to inform serious cases ___________________________________________________ 5
2.7 Product safety / product recalls _________________________________________________ 5
3 Safety instructions ______________________________________________________________ 6
3.1 Meaning of symbols _________________________________________________________ 6
3.2 Common safety instructions ___________________________________________________ 6
4 Delivery and Preparing for use ____________________________________________________ 9
5 Adjusting and adaptation possibilities ____________________________________________ 13
5.1 Wheel lock (knee lever wheel locks, mounted on the frame) _________________________ 13
5.2 Wheel lock (wheel lock lever integrated in wheel guards)____________________________ 14
5.3 Seat width / seat height / camber ______________________________________________ 14
5.4 Seat depth ________________________________________________________________ 15
5.5 Backrest height (backrest panel trough shaped)___________________________________ 15
5.6 Backrest height (backrest panel angle- and height adjustable)________________________ 15
5.7 Decline (backrest panel trough shaped) _________________________________________ 16
5.8 Decline (backrest panel angle- and height adjustable) _ ____________________________ 16
5.9 Active degree _____________________________________________________________ 16
5.10 Tilt ______________________________________________________________________ 16
5.11 Height adjustment of push-bar ________________________________________________ 17
5.12 Height- and angle adjustment of push-handle_____________________________________ 17
5.13 Anti tip ___________________________________________________________________ 17
514 Detaching rear wheels with quick-release-axle ___________________________________ 18
5.15 Pneumatic tyres / PU-tyres ___________________________________________________ 18
5.16 Hand rims_________________________________________________________________ 18
5.17 Drum brakes ______________________________________________________________ 19
6 Accessories ___________________________________________________________________ 20
6.1 Seat panel ________________________________________________________________ 20
6.2 Backrest (backrest panel angle- and height adjustable) _____________________________ 20
6.3 Backrest (backrest panel trough shaped) ________________________________________ 21
6.4 Foot rest hanger 90° ________________________________________________________ 21
6.5 Knee angle system (angle adjustable) __________________________________________ 21
6.6 Footrest angle adjustment____________________________________________________ 21
6.7 Footrest with locking mechanism (optional) ______________________________________ 22
6.8 Footrest __________________________________________________________________ 22
6.9 Footrest with heel stop ______________________________________________________ 22
6.10 Single foot rest hanger (with two single footplates in boat shape) _____________________ 22
6.11 Lower leg length ___________________________________________________________ 22
6.12 Seat cushion ______________________________________________________________ 22
6.13 Backrest cushion ___________________________________________________________ 23
6.14 Spoke guards _____________________________________________________________ 23
6.15 Anti-tip ___________________________________________________________________ 23
1 Model identification & basic configuration___________________________________________ 4
1.1 Model identification __________________________________________________________ 4
1.2 Basic configuration __________________________________________________________ 4
1.3 Environmental conditions _____________________________________________________ 4
2 Common information ____________________________________________________________ 5
2.1 Preface ___________________________________________________________________ 5
2.2 Application_________________________________________________________________ 5
2.3 Declaration of conformity______________________________________________________ 5
2.4 Terms of warranty ___________________________________________________________ 5
2.5 Servicing and repairs_________________________________________________________ 5
2.6 Duty to inform serious cases ___________________________________________________ 5
2.7 Product safety / product recalls _________________________________________________ 5
3 Safety instructions ______________________________________________________________ 6
3.1 Meaning of symbols _________________________________________________________ 6
3.2 Common safety instructions ___________________________________________________ 6
4 Delivery and Preparing for use ____________________________________________________ 9
5 Adjusting and adaptation possibilities ____________________________________________ 13
5.1 Wheel lock (knee lever wheel locks, mounted on the frame) _________________________ 13
5.2 Wheel lock (wheel lock lever integrated in wheel guards)____________________________ 14
5.3 Seat width / seat height / camber ______________________________________________ 14
5.4 Seat depth ________________________________________________________________ 15
5.5 Backrest height (backrest panel trough shaped)___________________________________ 15
5.6 Backrest height (backrest panel angle- and height adjustable)________________________ 15
5.7 Decline (backrest panel trough shaped) _________________________________________ 16
5.8 Decline (backrest panel angle- and height adjustable) _ ____________________________ 16
5.9 Active degree _____________________________________________________________ 16
5.10 Tilt ______________________________________________________________________ 16
5.11 Height adjustment of push-bar ________________________________________________ 17
5.12 Height- and angle adjustment of push-handle_____________________________________ 17
5.13 Anti tip ___________________________________________________________________ 17
514 Detaching rear wheels with quick-release-axle ___________________________________ 18
5.15 Pneumatic tyres / PU-tyres ___________________________________________________ 18
5.16 Hand rims_________________________________________________________________ 18
5.17 Drum brakes ______________________________________________________________ 19
6 Accessories ___________________________________________________________________ 20
6.1 Seat panel ________________________________________________________________ 20
6.2 Backrest (backrest panel angle- and height adjustable) _____________________________ 20
6.3 Backrest (backrest panel trough shaped) ________________________________________ 21
6.4 Foot rest hanger 90° ________________________________________________________ 21
6.5 Knee angle system (angle adjustable) __________________________________________ 21
6.6 Footrest angle adjustment____________________________________________________ 21
6.7 Footrest with locking mechanism (optional) ______________________________________ 22
6.8 Footrest __________________________________________________________________ 22
6.9 Footrest with heel stop ______________________________________________________ 22
6.10 Single foot rest hanger (with two single footplates in boat shape) _____________________ 22
6.11 Lower leg length ___________________________________________________________ 22
6.12 Seat cushion ______________________________________________________________ 22
6.13 Backrest cushion ___________________________________________________________ 23
6.14 Spoke guards _____________________________________________________________ 23
6.15 Anti-tip ___________________________________________________________________ 23
3
6.16 Tip-assist_________________________________________________________________ 24
6.17 Headrest „standard“: with cushion _____________________________________________ 24
6.18 Headrest bracket „universal“ __________________________________________________ 24
6.19 Headrest with occiput upholstery ______________________________________________ 24
6.20 Trunk supports ____________________________________________________________ 25
6.21 Chest-/thoracic support______________________________________________________ 25
6.22 Armrests with PU pads ______________________________________________________ 25
6.23 Therapy tray ______________________________________________________________ 25
6.24 Lap belt __________________________________________________________________ 26
6.25 4-point lap belt_____________________________________________________________ 26
6.26 Ankle hugger ______________________________________________________________ 27
6.27 Hip pads _________________________________________________________________ 27
6.28 Abduction block____________________________________________________________ 27
7 Transport _____________________________________________________________________ 27
7.1 Inthe trunk (luggage space) of a car____________________________________________ 27
7.2 Using SWINGBO VTi for bus transport _________________________________________ 28
7.3 General __________________________________________________________________ 28
7.4 Securing the wheelchair during bus transport ____________________________________ 29
7.5 Buckleup the wheelchair passenger ___________________________________________ 29
7.6 Transfer - getting into or out of the wheelchair ____________________________________ 31
7.7 Anti-tippers to override steps _________________________________________________ 32
8 Storage_______________________________________________________________________ 32
9 Recycling and disposal _________________________________________________________ 32
10 Maintenance / Service___________________________________________________________ 33
11 Technical Data _________________________________________________________________ 34
6.16 Tip-assist_________________________________________________________________ 24
6.17 Headrest „standard“: with cushion _____________________________________________ 24
6.18 Headrest bracket „universal“ __________________________________________________ 24
6.19 Headrest with occiput upholstery ______________________________________________ 24
6.20 Trunk supports ____________________________________________________________ 25
6.21 Chest-/thoracic support______________________________________________________ 25
6.22 Armrests with PU pads ______________________________________________________ 25
6.23 Therapy tray ______________________________________________________________ 25
6.24 Lap belt __________________________________________________________________ 26
6.25 4-point lap belt_____________________________________________________________ 26
6.26 Ankle hugger ______________________________________________________________ 27
6.27 Hip pads _________________________________________________________________ 27
6.28 Abduction block____________________________________________________________ 27
7 Transport _____________________________________________________________________ 27
7.1 Inthe trunk (luggage space) of a car____________________________________________ 27
7.2 Using SWINGBO VTi for bus transport _________________________________________ 28
7.3 General __________________________________________________________________ 28
7.4 Securing the wheelchair during bus transport ____________________________________ 29
7.5 Buckleup the wheelchair passenger ___________________________________________ 29
7.6 Transfer - getting into or out of the wheelchair ____________________________________ 31
7.7 Anti-tippers to override steps _________________________________________________ 32
8 Storage_______________________________________________________________________ 32
9 Recycling and disposal _________________________________________________________ 32
10 Maintenance / Service___________________________________________________________ 33
11 Technical Data _________________________________________________________________ 34
4
1 Model identification
1.1 Model identification
(The label of SWINGBO 2 is placed on the axle tube)
Hoggi GmbH
Eulerstr. 27
56235 Ransbach-Baumbach
MADE IN GERMANY
(01)04047349096062(21)202178999
3247-10SB-XXX
SWINGBO 2 XL
Kantelbarer Rollstuhl
2021178999
2021/05/15
max. load
100kg
Hoggi GmbH
Eulerstr. 27
56235 Ransbach-Baumbach
MADE IN GERMANY
(01)04047349096062(21)202178999
3247-10SB-XXX
SWINGBO 2 XL
Kantelbarer Rollstuhl
2021178999
2021/05/15
max. load
100kg
Hoggi GmbH
Eulerstr. 27
56235 Ransbach-Baumbach
MADE IN GERMANY
(01)04047349096062(21)202178999
3247-10SB-XXX
SWINGBO 2 XL
Kantelbarer Rollstuhl
2021178999
2021/05/15
max. load
100kg
1.3 Environmental conditions
Environmental factors such as temperature and humidity can damage the wheelchair. The manufacturer
recommends not condensing the SWINGBO 2 XL at ambient temperatures between -20 ° C and + 40 ° C
and a humidity of 5 to 100%.
Caution: Prolonged exposure to the sun may cause parts of the wheelchair to become hot. Be sure to!
1.2 Basic configuration
- Aluminium rigid frame with centre of gravity tilt in space
- Wheel base adjustable in 2,5 cm steps
- Wheel locks
- Rear wheels incl. push rims, detachable by quick release axles
- Adjustable seat height
- Push-handle or push-bar included
- Adjustable tilt in space: -5° to +45°
The tilt mechanism can be limited if the seat height is low,
the active degree is low or if the armrests are adjusted lowly.
- Choice of seat widths 32-44 cm
- Maximum load 100 kg
Serial number
Classification / Product name
Year of manufacture
UDI Code
Manufacturer
Place of manufacture
Manufacturing date
Maximum load / load capacity
CE label
Colour code
Item number
1 Model identification
1.1 Model identification
(The label of SWINGBO 2 is placed on the axle tube)
Hoggi GmbH
Eulerstr. 27
56235 Ransbach-Baumbach
MADE IN GERMANY
(01)04047349096062(21)202178999
3247-10SB-XXX
SWINGBO 2 XL
Kantelbarer Rollstuhl
2021178999
2021/05/15
max. load
100kg
Hoggi GmbH
Eulerstr. 27
56235 Ransbach-Baumbach
MADE IN GERMANY
(01)04047349096062(21)202178999
3247-10SB-XXX
SWINGBO 2 XL
Kantelbarer Rollstuhl
2021178999
2021/05/15
max. load
100kg
Hoggi GmbH
Eulerstr. 27
56235 Ransbach-Baumbach
MADE IN GERMANY
(01)04047349096062(21)202178999
3247-10SB-XXX
SWINGBO 2 XL
Kantelbarer Rollstuhl
2021178999
2021/05/15
max. load
100kg
1.3 Environmental conditions
Environmental factors such as temperature and humidity can damage the wheelchair. The manufacturer
recommends not condensing the SWINGBO 2 XL at ambient temperatures between -20 ° C and + 40 ° C
and a humidity of 5 to 100%.
Caution: Prolonged exposure to the sun may cause parts of the wheelchair to become hot. Be sure to!
1.2 Basic configuration
- Aluminium rigid frame with centre of gravity tilt in space
- Wheel base adjustable in 2,5 cm steps
- Wheel locks
- Rear wheels incl. push rims, detachable by quick release axles
- Adjustable seat height
- Push-handle or push-bar included
- Adjustable tilt in space: -5° to +45°
The tilt mechanism can be limited if the seat height is low,
the active degree is low or if the armrests are adjusted lowly.
- Choice of seat widths 32-44 cm
- Maximum load 100 kg
Serial number
Classification / Product name
Year of manufacture
UDI Code
Manufacturer
Place of manufacture
Manufacturing date
Maximum load / load capacity
CE label
Colour code
Item number
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
advertisement
Key Features
- Tilting wheelchair
- Aluminium rigid frame
- Adjustable wheelbase
- Detachable rear wheels
- Adjustable seat height
- Adjustable tilt angle
- Choice of seat widths
- Maximum load 100 kg
Related manuals
Frequently Answers and Questions
How do I adjust the seat depth on my SWINGBO 2 XL?
To adjust the seat depth, first remove the seat cushion. Then, loosen the four screws under the seat and slide the seat to the required position. Ensure that the screws are tightened securely after adjusting the seat depth.
How do I adjust the backrest height on my SWINGBO 2 XL?
The backrest height adjustment depends on the type of backrest you have. For a trough-shaped, 2-parts, height adjustable backrest, loosen the four screws on the backrest panel and adjust the backrest height by sliding the panel to the required position. For an angle-adjustable backrest, loosen the four screws on the backrest panel and adjust the backrest height by sliding the panel to the required position.
What is the active degree on my SWINGBO 2 XL and how do I adjust it?
The active degree describes the position of the backrest in relation to the rear wheels. It can be adjusted in 6 steps (0-5) by sliding the axle unit. A higher active degree allows for more maneuverability, but requires a practiced driver and the use of an anti-tip.
advertisement
