IPORT CONNECT PRO PoE+ Adapter Owner's Manual
The iPort CONNECT PRO PoE+ Adapter is a device that allows you to power and connect your iPad to a Surface Mount System. It features a built-in PoE+ injector, which provides power to the device over an Ethernet cable. The adapter also includes a USB-C to molex cable, which connects the iPad to the Surface Mount installation.
advertisement
CONNECT
PRO
Use a Cat 5 or Cat 6 cable terminated
with an RJ-45 connector to connect the
IPORT PoE+ Adapter (72102).
Connect the other end of the Cat 5 or
Cat 6 to a PoE+ Switch or PoE+ Injector.
1 Use the IPORT USB-C to molex cable
provided in the Surface Mount Systems
(70752, 70754, 70755, 70756, 70808, 70806)
and connect into the molex jack of the
PoE+ Adapter.
Connect the USB-C cable into the iPad
and complete the Surface Mount Install.
For more information on installing the
Surface Mount please reference the
instruciton included with the Surface
Mount Systems.
2
PRO
Use a Cat 5 or Cat 6 cable terminated
with an RJ-45 connector to connect the
IPORT PoE+ Adapter (72102).
Connect the other end of the Cat 5 or
Cat 6 to a PoE+ Switch or PoE+ Injector.
1 Use the IPORT USB-C to molex cable
provided in the Surface Mount Systems
(70752, 70754, 70755, 70756, 70808, 70806)
and connect into the molex jack of the
PoE+ Adapter.
Connect the USB-C cable into the iPad
and complete the Surface Mount Install.
For more information on installing the
Surface Mount please reference the
instruciton included with the Surface
Mount Systems.
2
CONNECT
PRO
PoE+ Switch
25.5W IEEE 802.3at
PoE+
Adapter
(72102)
(72106)
(72102)
PoE+
Switch
IPORT USB-C to
proprietary cable
IPORT Surface Mount
70752, 70754
70755, 70756
70808, 70806
PoE+
Adapter
PoE+
Injector
PoE+
Injector
IPORT USB-C to
proprietary cable
IPORT Surface Mount
70752, 70754
70755, 70756
70808, 70806
PRO
PoE+ Switch
25.5W IEEE 802.3at
PoE+
Adapter
(72102)
(72106)
(72102)
PoE+
Switch
IPORT USB-C to
proprietary cable
IPORT Surface Mount
70752, 70754
70755, 70756
70808, 70806
PoE+
Adapter
PoE+
Injector
PoE+
Injector
IPORT USB-C to
proprietary cable
IPORT Surface Mount
70752, 70754
70755, 70756
70808, 70806
advertisement
Key Features
- PoE+ Power
- USB-C Connection
- Surface Mount Compatibility
- Cat 5/Cat 6 Cable
- RJ-45 Connector
- IPORT USB-C to molex cable
Related manuals
Frequently Answers and Questions
What type of cable do I need to connect the PoE+ Adapter to the PoE+ Switch or Injector?
You'll need to use a Cat 5 or Cat 6 cable terminated with an RJ-45 connector.
What is the purpose of the IPORT USB-C to molex cable?
This cable connects the PoE+ Adapter to the Surface Mount system and allows you to connect your iPad via the USB-C port.
Where can I find more information about installing the Surface Mount System?
Refer to the instructions included with the Surface Mount Systems (70752, 70754, 70755, 70756, 70808, 70806).
advertisement