matev SPR-WD 100 Box spreader Operating Manual
The matev SPR-WD 100 is a box spreader designed for municipal winter service, specializing in applying dry sand, salt, and grit. It features a defined spread width of 0.93m to prevent overspreading side areas. The spread rate is adjustable, allowing adaptation to various requirements and spread materials.
advertisement
matev GmbH
Nürnberger Str. 50
90579 Langenzenn
T +49 9101 9087 -0
F +49 9101 9087 -20
[email protected]
www.matev.eu
Version: Feb. 2015
Original Operating Manual
Box spreader
SPR – WD 100
Nürnberger Str. 50
90579 Langenzenn
T +49 9101 9087 -0
F +49 9101 9087 -20
[email protected]
www.matev.eu
Version: Feb. 2015
Original Operating Manual
Box spreader
SPR – WD 100
Contents
Page 2
Table of contents
1. About this operating manual ..................................................................................... 3
2. Safety........................................................................................................................... 4
2.1 Intended use................................................................................................................. 4
2.2 Qualifications of personnel............................................................................................ 4
2.3 General safety notices .................................................................................................. 4
2.4 Special safety notices ................................................................................................... 5
3. Task and use............................................................................................................... 6
3.1 Box spreader with wheel drive ...................................................................................... 6
3.2 Box spreader with hydraulic drive ................................................................................. 6
4. Delivery and transport................................................................................................ 6
5. Installation................................................................................................................... 7
5.1 Mounting the spreader on the tractor ............................................................................ 7
6. Operation .................................................................................................................... 9
6.1 Filling the spreader ....................................................................................................... 9
6.2 Emptying the spreader................................................................................................ 10
6.3 Spreading grit or granular fertilizer .............................................................................. 10
6.4 Spreader operation - variant with wheel drive ............................................................. 11
6.5 Spreader operation - hydraulic spreader..................................................................... 12
6.6 Regulation of the spread rate...................................................................................... 12
6.7 Spread density............................................................................................................ 13
6.8 Spreading trial ............................................................................................................ 14
6.9 Spread table ............................................................................................................... 15
7. Optional accessories................................................................................................ 16
7.1 Parking & mounting supports...................................................................................... 16
7.2 Loosening shaft .......................................................................................................... 17
8. Maintenance.............................................................................................................. 20
8.1 Service ....................................................................................................................... 20
8.2 Repair......................................................................................................................... 21
9. Disposal .................................................................................................................... 21
10. Guarantee.................................................................................................................. 21
11. Technical data........................................................................................................... 21
12. List of illustrations.................................................................................................... 23
13. EG - Declaration of Conformity................................................................................ 24
Page 2
Table of contents
1. About this operating manual ..................................................................................... 3
2. Safety........................................................................................................................... 4
2.1 Intended use................................................................................................................. 4
2.2 Qualifications of personnel............................................................................................ 4
2.3 General safety notices .................................................................................................. 4
2.4 Special safety notices ................................................................................................... 5
3. Task and use............................................................................................................... 6
3.1 Box spreader with wheel drive ...................................................................................... 6
3.2 Box spreader with hydraulic drive ................................................................................. 6
4. Delivery and transport................................................................................................ 6
5. Installation................................................................................................................... 7
5.1 Mounting the spreader on the tractor ............................................................................ 7
6. Operation .................................................................................................................... 9
6.1 Filling the spreader ....................................................................................................... 9
6.2 Emptying the spreader................................................................................................ 10
6.3 Spreading grit or granular fertilizer .............................................................................. 10
6.4 Spreader operation - variant with wheel drive ............................................................. 11
6.5 Spreader operation - hydraulic spreader..................................................................... 12
6.6 Regulation of the spread rate...................................................................................... 12
6.7 Spread density............................................................................................................ 13
6.8 Spreading trial ............................................................................................................ 14
6.9 Spread table ............................................................................................................... 15
7. Optional accessories................................................................................................ 16
7.1 Parking & mounting supports...................................................................................... 16
7.2 Loosening shaft .......................................................................................................... 17
8. Maintenance.............................................................................................................. 20
8.1 Service ....................................................................................................................... 20
8.2 Repair......................................................................................................................... 21
9. Disposal .................................................................................................................... 21
10. Guarantee.................................................................................................................. 21
11. Technical data........................................................................................................... 21
12. List of illustrations.................................................................................................... 23
13. EG - Declaration of Conformity................................................................................ 24
About this operating manual
Page 3
1. About this operating manual
Dear customer! Dear customer!
Thank you for purchasing the grass collection container, we appreciate your trust.
Prior to using this spreader for the first time read this operating manual carefully and
conscientiously all the way through.
Keep this operating manual where it is easily accessible. This will enable you to refer to
important information and handling instructions as needed.
Listings with bullet points are marked as follows:
• Text
• Text
• Text . . .
Handling instructions are marked in the sequence in which they should be executed, as
follows:
1.1.1 Text
1.1.2 Text
1.1.3 Text ... . .
The salt and sand spreader is subject to technical progress. All information,
illustrations, and technical specifications represent the latest status at the
time this manual was published. The manufacturer reserves the right to make
changes at any time in the interest of technical progress.
Page 3
1. About this operating manual
Dear customer! Dear customer!
Thank you for purchasing the grass collection container, we appreciate your trust.
Prior to using this spreader for the first time read this operating manual carefully and
conscientiously all the way through.
Keep this operating manual where it is easily accessible. This will enable you to refer to
important information and handling instructions as needed.
Listings with bullet points are marked as follows:
• Text
• Text
• Text . . .
Handling instructions are marked in the sequence in which they should be executed, as
follows:
1.1.1 Text
1.1.2 Text
1.1.3 Text ... . .
The salt and sand spreader is subject to technical progress. All information,
illustrations, and technical specifications represent the latest status at the
time this manual was published. The manufacturer reserves the right to make
changes at any time in the interest of technical progress.
Safety
Page 4
2. Safety
Guidelines and instructions with which you must comply, are summarized in this
section.
2.1 Intended use
The spreader should only be mounted on tractors with sufficient power axle load.
The prescribed ballast for the tractor and the specified maximum axle load must
be complied with.
All other uses are excluded.
Non-intended use causes:
• Health hazards for the operator or for third parties
• Damage to the tractor and the implements
• Environmental damage
2.2 Qualifications of personnel
The spreader should only be mounted, operated, and maintained by persons who
have the following qualifications:
• They must be at least 18 years old.
• They must have read and understood this operating manual.
2.3 General safety notices
In this section general safety notices/instructions are explained that are used in
the subsequent sections.
Comply with these safety instructions to ensure safe operation of the spreader
and to save work time and costs.
Danger!
Severe injury to the operator or third parties occurs. Comply with the safety
notice.
Attention!
Minor injury to the operator or third parties can occur. The tractor, the
spreader or the environment can be damaged.
Comply with the safety notice.
Note!
Important, helpful tips or information for the operator.
Read this note. It facilitates your work.
Page 4
2. Safety
Guidelines and instructions with which you must comply, are summarized in this
section.
2.1 Intended use
The spreader should only be mounted on tractors with sufficient power axle load.
The prescribed ballast for the tractor and the specified maximum axle load must
be complied with.
All other uses are excluded.
Non-intended use causes:
• Health hazards for the operator or for third parties
• Damage to the tractor and the implements
• Environmental damage
2.2 Qualifications of personnel
The spreader should only be mounted, operated, and maintained by persons who
have the following qualifications:
• They must be at least 18 years old.
• They must have read and understood this operating manual.
2.3 General safety notices
In this section general safety notices/instructions are explained that are used in
the subsequent sections.
Comply with these safety instructions to ensure safe operation of the spreader
and to save work time and costs.
Danger!
Severe injury to the operator or third parties occurs. Comply with the safety
notice.
Attention!
Minor injury to the operator or third parties can occur. The tractor, the
spreader or the environment can be damaged.
Comply with the safety notice.
Note!
Important, helpful tips or information for the operator.
Read this note. It facilitates your work.
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
advertisement
Key Features
- Adjustable spread rate
- Defined spread width
- Wheel drive
- Hydraulic drive
- Municipal winter service
- Sand, salt, grit
- Tractor attachment
Related manuals
Frequently Answers and Questions
How do I regulate the spread rate of the matev SPR-WD 100?
The spreader has a mechanical spread rate adjustment unit with a regulating lever. Adjust the lever to enlarge the spread gap and increase the spread rate. Optionally, change the number of cams on the spreader roller by screwing on or unscrewing them.
How do I fill the matev SPR-WD 100?
Close the spread rate regulator by bringing the lever into the outermost position. Fill the spreader with spread material, ensuring not to exceed the maximum load capacity. Different specific weights occur depending on the spread material's moisture level.
How do I empty the matev SPR-WD 100?
To empty the distribution container, bring the spread rate regulation lever into service position. This maximizes the spreader gap, allowing the spread material to trickle out.
advertisement
