matev SWE-45 Front sweeper rotate gearbox Assembly Instruction
The matev SWE-45 is a specialized device designed for rotating the gearbox of front sweepers. It is a vital component in maintaining and repairing front sweepers, ensuring their optimal performance and reliability.
advertisement
1. Remove the cover and belt
2. Dismount bearings on both sides and remove side plate
3. Pull out both sweeping rollers
4. Unscrew bolts on gearbox, turn gearbox by 180 °
and screw the gearbox again
5. Mount sweeping rollers
6. Mount side plates
7. Mount the bearings
8. Mount the belt and cover agian
09.04.2018 TSE 1
SWE45: Rotate gearbox
2. Dismount bearings on both sides and remove side plate
3. Pull out both sweeping rollers
4. Unscrew bolts on gearbox, turn gearbox by 180 °
and screw the gearbox again
5. Mount sweeping rollers
6. Mount side plates
7. Mount the bearings
8. Mount the belt and cover agian
09.04.2018 TSE 1
SWE45: Rotate gearbox
advertisement
Key Features
- Gearbox rotation
- Bearing removal
- Sweeping roller removal
- Side plate removal
- Cover and belt removal
Related manuals
Frequently Answers and Questions
How do I rotate the gearbox on a SWE-45?
To rotate the gearbox, first remove the cover and belt. Then, dismount the bearings on both sides and remove the side plate. Pull out the sweeping rollers. Unscrew the bolts on the gearbox, turn it by 180 degrees, and screw it back together. Reverse the process to reassemble.
What components need to be removed before rotating the gearbox?
You need to remove the cover, belt, bearings, side plate, and sweeping rollers before rotating the SWE-45 gearbox.
Is there any special tool required for rotating the gearbox?
The manual doesn't mention any special tools required for this task. However, standard tools for removing and attaching bolts and other components are likely needed.
advertisement
