TIC AVP100 100W 4-Zone 70v/100v/4-16Ω Commercial Mixer Amplifier Instruction manual
The TIC AVP-100 is a commercial-grade Class A/B power amplifier with constant-voltage options. It's designed for broadcasting audio via a constant-voltage distributed sound system or high-impedance loudspeaker system, making it suitable for public address (PA) and background music applications. The amplifier offers a range of features, including 100 watts of total power, 4-zone 70v output, 70v/100v/8Ω single line output, built-in MP3 playback capability (via USB port), and more.
advertisement
AVP100
Instruction Manual
100W 4-Zone 70v/100v/4-16Ω
Commerical Mixer Amplifer
CAUTION:
TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE ANY FRONT/BACK COVERS OR
PANELS. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.
The lightning flash with an arrowhead symbol, within an equilateral triangle, is intended
to alert the user to the presence of uninsulated “dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the
literature accompanying the product.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN
OR MOISTURE.
SOUND WARNING:
Avoid hearing damage by establishing safe listening volumes. Listening to this product at high volumes
or for extended time periods may cause permanent hearing loss. Protect your hearing by establishing
safe volumes. Start with the volume setting control at its lowest setting. Slowly increase the volume until
you can hear it comfortably and clearly without distortion. Reduce the volume or stop listening if you
experience ringing in your ears or any discomfort. Consult with a physician if needed.
CH1
CH2
CH3
CH4
V+
V-
MIC1MIN MAX
AVP100
2 4 6 8 10
MIC1 MIC2 MIC3 AUX1 AUX2 BASS TREBLE
Instruction Manual
100W 4-Zone 70v/100v/4-16Ω
Commerical Mixer Amplifer
CAUTION:
TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE ANY FRONT/BACK COVERS OR
PANELS. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.
The lightning flash with an arrowhead symbol, within an equilateral triangle, is intended
to alert the user to the presence of uninsulated “dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the
literature accompanying the product.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN
OR MOISTURE.
SOUND WARNING:
Avoid hearing damage by establishing safe listening volumes. Listening to this product at high volumes
or for extended time periods may cause permanent hearing loss. Protect your hearing by establishing
safe volumes. Start with the volume setting control at its lowest setting. Slowly increase the volume until
you can hear it comfortably and clearly without distortion. Reduce the volume or stop listening if you
experience ringing in your ears or any discomfort. Consult with a physician if needed.
CH1
CH2
CH3
CH4
V+
V-
MIC1MIN MAX
AVP100
2 4 6 8 10
MIC1 MIC2 MIC3 AUX1 AUX2 BASS TREBLE
01 02
IMPORTANT SAFETY INSTRUCTIONS:
WARNING: Improper use may potentially cause injury, loss of property and
/or death.
WARRANTY:
1. Read these instructions.
2. Follow all instructions and heed all warnings.
3. Keep this instruction manual in a safe place for future reference.
4. Do not use this apparatus near water.
5. Clean only with a dry cloth.
6. Do not install this apparatus near any heat sources such as radiators, heat
registers, stoves or other apparatus (including amplifiers) that produce heat.
7. Do not block any ventilation openings. Install this apparatus in accordance with the
manufacturer’s instructions.
8. Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A ground-type plug has
two blades and a third grounding prong. The wide blade or the third prong is provided
for your safety. If the provided plug does not fit into your outlet, consult an electrician
for replacement of the obsolete outlet.
9. Protect the power cord from being walked on or pinched, particularly at plugs,
convenience receptacles and the point where they exit from the apparatus.
10. Use only attachments and accessories specified by the manufacturer.
11. Unplug this apparatus during lightning storms or when unused for long periods of
time.
12. Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as when the power supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the apparatus, or
the apparatus had been exposed to rain or moisture, does not operate normally or
has been dropped.
13. Do not expose this apparatus to dripping or splashing, and ensure that no objects
filled with liquids, such as vases, are placed on the apparatus.
14. To disconnect this apparatus from the AC mains completely, disconnect the
power supply cord plug from the AC receptacle.
15. The mains plug of the power supply cord shall remain readily operable.
16. Do not expose batteries to excessive heat such as sunshine, fire, or the like.
17. This is not a children’s product and is not intended for use by children under 14
years old.
18. Do not place heavy objects on the apparatus.
19. Only install this apparatus in an upright position at a location that is stable and
well-ventilated.
20. If any abnormal conditions are found during use, please turn off the apparatus
and disconnect the power supply immediately. Contact your nearest dealer and do
TIC offers a limited one-year full parts and labor warranty for all of our new products.
Please visit TIC’s warranty page (http://www.ticcorp.com/warranty/ ) for detail to our
latest warranty policy.
TIC Audio Inc. All rights reserved. The TIC logo is a trademark of TIC Audio Inc,
registered in the United States.
Features, specifications, and appearance are subject to change without notice.
For more information, please visit our website: www.ticcorp.com.
IMPORTANT SAFETY INSTRUCTIONS:
WARNING: Improper use may potentially cause injury, loss of property and
/or death.
WARRANTY:
1. Read these instructions.
2. Follow all instructions and heed all warnings.
3. Keep this instruction manual in a safe place for future reference.
4. Do not use this apparatus near water.
5. Clean only with a dry cloth.
6. Do not install this apparatus near any heat sources such as radiators, heat
registers, stoves or other apparatus (including amplifiers) that produce heat.
7. Do not block any ventilation openings. Install this apparatus in accordance with the
manufacturer’s instructions.
8. Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A ground-type plug has
two blades and a third grounding prong. The wide blade or the third prong is provided
for your safety. If the provided plug does not fit into your outlet, consult an electrician
for replacement of the obsolete outlet.
9. Protect the power cord from being walked on or pinched, particularly at plugs,
convenience receptacles and the point where they exit from the apparatus.
10. Use only attachments and accessories specified by the manufacturer.
11. Unplug this apparatus during lightning storms or when unused for long periods of
time.
12. Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as when the power supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the apparatus, or
the apparatus had been exposed to rain or moisture, does not operate normally or
has been dropped.
13. Do not expose this apparatus to dripping or splashing, and ensure that no objects
filled with liquids, such as vases, are placed on the apparatus.
14. To disconnect this apparatus from the AC mains completely, disconnect the
power supply cord plug from the AC receptacle.
15. The mains plug of the power supply cord shall remain readily operable.
16. Do not expose batteries to excessive heat such as sunshine, fire, or the like.
17. This is not a children’s product and is not intended for use by children under 14
years old.
18. Do not place heavy objects on the apparatus.
19. Only install this apparatus in an upright position at a location that is stable and
well-ventilated.
20. If any abnormal conditions are found during use, please turn off the apparatus
and disconnect the power supply immediately. Contact your nearest dealer and do
TIC offers a limited one-year full parts and labor warranty for all of our new products.
Please visit TIC’s warranty page (http://www.ticcorp.com/warranty/ ) for detail to our
latest warranty policy.
TIC Audio Inc. All rights reserved. The TIC logo is a trademark of TIC Audio Inc,
registered in the United States.
Features, specifications, and appearance are subject to change without notice.
For more information, please visit our website: www.ticcorp.com.
03 04
AVP100
Overview:
Features:
Usage:
TIC AVP-100 is a commerical-grade class A/B power amplifer with constant-
voltage options.
• 100 watt total power
• Standard 2U chassis
• 4-zone 70v ouput
• 70v/100v/8Ω single line output
• 3 microphones input, 2 AUX audio input, 1 audio output
• EQ with treble and bass adjustment
• Automatic thermal, overload, circuit protection
• Distortion/clipping indicators
• Built-in MP3 playback capability (via USB port)
Designed for broadcasting audio via a constant-voltage distributed sound system or
high-impedance loudspeaker system. Perfect for public address (PA) and background
music.
Table of Content
1. Safety Instructions.................................................................................1
2. Warranty & Company Info.......................................................................2
3. Overview..............................................................................................4
4. Front Panel...........................................................................................5
5. Rear Panel............................................................................................6
6. Operation...........................................................................................7-9
7. Troubleshooting...................................................................................10
8. Input/output Connection Diagram..........................................................11
9. System Schematics..............................................................................12
10. Specifications....................................................................................13
11. Dimensions........................................................................................14
AVP100
Overview:
Features:
Usage:
TIC AVP-100 is a commerical-grade class A/B power amplifer with constant-
voltage options.
• 100 watt total power
• Standard 2U chassis
• 4-zone 70v ouput
• 70v/100v/8Ω single line output
• 3 microphones input, 2 AUX audio input, 1 audio output
• EQ with treble and bass adjustment
• Automatic thermal, overload, circuit protection
• Distortion/clipping indicators
• Built-in MP3 playback capability (via USB port)
Designed for broadcasting audio via a constant-voltage distributed sound system or
high-impedance loudspeaker system. Perfect for public address (PA) and background
music.
Table of Content
1. Safety Instructions.................................................................................1
2. Warranty & Company Info.......................................................................2
3. Overview..............................................................................................4
4. Front Panel...........................................................................................5
5. Rear Panel............................................................................................6
6. Operation...........................................................................................7-9
7. Troubleshooting...................................................................................10
8. Input/output Connection Diagram..........................................................11
9. System Schematics..............................................................................12
10. Specifications....................................................................................13
11. Dimensions........................................................................................14
05 06
Front panel
1 Power switch
7 Bass EQ control
2 Mic 1 volume control
3 Mic 2 volume control
4 Mic 3 volume control
5 AUX 1 volume control
6 AUX 2 volume control
8 Treble EQ control
9 Mic 1 (priority) input
10 Play/Pause (MP3)
11 Previous Track / (hold) decrease volume (MP3)
12 Next Track / (hold) increase volume (MP3)
13 USB port (MP3 playback)
14 Zone 1-4 switches & indictators
15 Power, protection mode, signal, and clipping indictator
Rear Panel
AC 110V 50Hz
MUTE MIC 2 MIC 3
1 2 3 4 5 6 7 8
1 Mute level adjustment
7 Zone 1-4 terminals (70v)
2 Mic 2 input
3 MIC3 input
4 AUX 1 input
5 AUX 2 input
6 LINE output
8 Power cord
9 100v output terminal
10 70v output terminal
11 4-16Ω output terminal
12 Common terminal
Mic 1 Priority/Mute Function
By default, Mic 1 has priority over all other inputs. When plugged in, the other inputs will
automatically be muted. You can adjust the crosstalk level by turning the dial (0 - 30dB) on the rear
panel.
CH1
CH2
CH3
CH4
V+
V-
MIC1MIN MAX
1 2 3 4 5 6 7 8 9 10 11 12 13
1414
AVP100
2 4 6 8 10
MIC1 MIC2 MIC3 AUX1 AUX2 BASS TREBLE
9 10 11 12
Front panel
1 Power switch
7 Bass EQ control
2 Mic 1 volume control
3 Mic 2 volume control
4 Mic 3 volume control
5 AUX 1 volume control
6 AUX 2 volume control
8 Treble EQ control
9 Mic 1 (priority) input
10 Play/Pause (MP3)
11 Previous Track / (hold) decrease volume (MP3)
12 Next Track / (hold) increase volume (MP3)
13 USB port (MP3 playback)
14 Zone 1-4 switches & indictators
15 Power, protection mode, signal, and clipping indictator
Rear Panel
AC 110V 50Hz
MUTE MIC 2 MIC 3
1 2 3 4 5 6 7 8
1 Mute level adjustment
7 Zone 1-4 terminals (70v)
2 Mic 2 input
3 MIC3 input
4 AUX 1 input
5 AUX 2 input
6 LINE output
8 Power cord
9 100v output terminal
10 70v output terminal
11 4-16Ω output terminal
12 Common terminal
Mic 1 Priority/Mute Function
By default, Mic 1 has priority over all other inputs. When plugged in, the other inputs will
automatically be muted. You can adjust the crosstalk level by turning the dial (0 - 30dB) on the rear
panel.
CH1
CH2
CH3
CH4
V+
V-
MIC1MIN MAX
1 2 3 4 5 6 7 8 9 10 11 12 13
1414
AVP100
2 4 6 8 10
MIC1 MIC2 MIC3 AUX1 AUX2 BASS TREBLE
9 10 11 12
5
6
7
8
advertisement
Key Features
- 100W output power
- 4-zone 70v output
- 70v/100v/8Ω single line output
- 3 mic inputs
- 2 AUX inputs
- EQ with treble and bass adjustment
- Built-in MP3 playback
- Thermal, overload, and short-circuit protection
Related manuals
Frequently Answers and Questions
How do I connect speakers to the TIC AVP-100?
Make sure the power is off. Connect the speaker wire to the appropriate terminals depending on the output type you're using (70v, 100v, or 4-16Ω). Ensure the polarity of the speaker wires are correct and matched. The manual provides a detailed connection diagram.
Why is my AVP100 showing a protection mode?
This could be due to overheating, overload, or a short circuit. Wait a few minutes for the amplifier to cool down or check for faulty connections or speaker loads that are too high.
How do I use the MP3 playback feature on the AVP-100?
Insert a USB storage device with compatible MP3 tracks into the USB port on the rear panel. The amplifier will automatically search and play the MP3 tracks. Use the buttons on the front panel to control playback, such as play/pause, next track, previous track, and volume adjustment.
advertisement