Solas ONE6 FS Freestanding Owner's Manual
The Solas ONE6 FS Freestanding is a stylish and efficient gas fireplace that can provide warmth and ambiance to any home. It features a sleek design that complements a variety of decor styles. The ONE6 FS is easy to install and operate, making it a great choice for homeowners looking for a convenient and reliable heat source. The optional blower kit, detailed in this manual, can be used to increase the efficiency and effectiveness of the fireplace. This manual provides instructions on installing and operating both the fireplace and the blower kit.
advertisement
THIS KIT IS ONLY FOR USE WITH THE FOLLOWING MODELS: ONE6 FS
ONE6 FS
OPTIONAL BLOWER KIT
FS-BLOWER
ONE6 FS
OPTIONAL BLOWER KIT
FS-BLOWER
TABLE OF CONTENTS
Kit Contents 2
Installation Instructions 3
Operation 6
Replacement Parts List 7
Warranty Information 8
WE STRONGLY SUGGEST THAT YOU READ THIS MANUAL THOROUGHLY BEFORE
BEGININNG THE INSTALLATION OF THE FIREPLACE HEAT REDISTRIBUTION KIT. THIS
SPECIFIC PRODUCT HAS ITS OWN UNIQUE SET-UP AND INSTALLATION
REQUIREMENTS THAT MUST BE FOLLOWED EXACTLY. PLAN YOUR INSTALLATION IN
ADVANCE BY CAREFULLY RE-VIEWING ALL THE INFORMATION CONTAINED IN THIS
MANUAL.
Kit Contents 2
Installation Instructions 3
Operation 6
Replacement Parts List 7
Warranty Information 8
WE STRONGLY SUGGEST THAT YOU READ THIS MANUAL THOROUGHLY BEFORE
BEGININNG THE INSTALLATION OF THE FIREPLACE HEAT REDISTRIBUTION KIT. THIS
SPECIFIC PRODUCT HAS ITS OWN UNIQUE SET-UP AND INSTALLATION
REQUIREMENTS THAT MUST BE FOLLOWED EXACTLY. PLAN YOUR INSTALLATION IN
ADVANCE BY CAREFULLY RE-VIEWING ALL THE INFORMATION CONTAINED IN THIS
MANUAL.
2
KIT CONTENTS
Blower Assembly
Blower Housing
Blower Wire Harness
KIT CONTENTS
Blower Assembly
Blower Housing
Blower Wire Harness
3
INSTALLATION INSTRUCTIONS
Use the following steps to install the optional ONE6 FS blower.
Step 1)
Step 2B)
SOLAS ONE6 FS shown with the rear panel
removed.
Step 2)
Step 2C)
Note the location of the Blower Housing
mounting holes and Blower Mounting Studs.
INSTALLATION INSTRUCTIONS
Use the following steps to install the optional ONE6 FS blower.
Step 1)
Step 2B)
SOLAS ONE6 FS shown with the rear panel
removed.
Step 2)
Step 2C)
Note the location of the Blower Housing
mounting holes and Blower Mounting Studs.
5
6
7
8
9
10
advertisement
Key Features
- Freestanding design
- Gas-powered
- Sleek design
- Optional blower kit
- Easy installation and operation
Related manuals
Frequently Answers and Questions
How do I install the optional blower kit?
The installation instructions for the blower kit are detailed in this manual. Refer to the 'Installation Instructions' section for step-by-step guidance.
What is the purpose of the Thermal Snap Disc?
The Thermal Snap Disc is a safety feature that prevents the blower from operating when the stove is cold. Once the stove reaches operating temperature, the Thermal Snap Disc allows the blower to be turned on.
How do I adjust the blower speed?
You can adjust the blower speed by turning the knob clockwise. The blower can be adjusted to different speed levels depending on your preference and needs.
advertisement
