Oxygen 3-9-102 CODA-SOL LED Kit Instructions
The Oxygen 3-9-102 CODA-SOL LED Kit is designed for use with Oxygen Coda 3-103-xx and Sol 3-104-xx model fans. This kit provides an LED lighting upgrade for your ceiling fan, improving both functionality and aesthetics. The kit includes an LED module that connects to the fan's wiring, allowing you to replace the existing light fixture with a brighter, energy-efficient LED light source.
advertisement
(Fig. 1) (Fig. 3)
(Fig. 2)
Fan motor
assembly
Bottom plate
assembly
Bottom plate
assembly
Acrylic
lens
Acrylic
cover slot
Bottom
plate
teethBottom
plate
Bottom
plate
LED
wire
Fan
wire
Remove
screws
Replace
screws
LED
module
LED
module
(Fig. 4)
3-9-102 LED kit
for Coda and Sol model ceiling fans
Coda 3-103-XX model
This LED kit is for oxygen Coda 3-103-xx and Sol 3-104-xx model fans. Follow illustrations (Figures 1-4) as needed.
1. If already attached, remove bottom cover from the fan.
2. Remove three screws around the inside perimeter of the bottom plate assembly (Fig. 1).
3. Make polorized connections of LED module to the fan (White to White and Blue to Blue) (Fig. 2).
4. Replace screws removed in step 2 to connect the LED module to the fan (Fig. 3).
5. Replace bottom cover with the acrylic lens provided with the kit by lining the teeth inside the bottom
plate with the slots in the lens. Insert lens and turn clockwise to secure (Fig. 4).
(Fig. 2)
Fan motor
assembly
Bottom plate
assembly
Bottom plate
assembly
Acrylic
lens
Acrylic
cover slot
Bottom
plate
teethBottom
plate
Bottom
plate
LED
wire
Fan
wire
Remove
screws
Replace
screws
LED
module
LED
module
(Fig. 4)
3-9-102 LED kit
for Coda and Sol model ceiling fans
Coda 3-103-XX model
This LED kit is for oxygen Coda 3-103-xx and Sol 3-104-xx model fans. Follow illustrations (Figures 1-4) as needed.
1. If already attached, remove bottom cover from the fan.
2. Remove three screws around the inside perimeter of the bottom plate assembly (Fig. 1).
3. Make polorized connections of LED module to the fan (White to White and Blue to Blue) (Fig. 2).
4. Replace screws removed in step 2 to connect the LED module to the fan (Fig. 3).
5. Replace bottom cover with the acrylic lens provided with the kit by lining the teeth inside the bottom
plate with the slots in the lens. Insert lens and turn clockwise to secure (Fig. 4).
3-9-102 LED kit
for Coda and Sol model ceiling fans
This LED kit is for oxygen Coda 3-103-xx and Sol 3-104-xx model fans. Follow illustrations (Figures 1-4) as needed.
1. If already attached, remove bottom cover from the fan.
2. Remove three screws around the inside perimeter of the bottom plate assembly (Fig. 1).
3. Make polorized connections of LED module to the fan (White to White and Blue to Blue) (Fig. 2).
4. Replace screws removed in step 2 to connect the LED module to the fan (Fig. 3).
5. Replace bottom cover with the acrylic lens provided with the kit by lining the teeth inside the bottom
plate with the slots in the lens. Insert lens and turn clockwise to secure (Fig. 4).
(Fig. 1) (Fig. 3)
(Fig. 2) (Fig. 4)
Sol 3-104-XX model
Fan motor
assembly
Fan motor
assembly
Bottom plate
assembly Bottom plate
assembly
Acrylic
lens
Acrylic
cover slot
Bottom
plate teeth
Bottom
plate
LED
wire
Fan
wire
Remove
screws
Replace
screws
LED
module
LED
module
for Coda and Sol model ceiling fans
This LED kit is for oxygen Coda 3-103-xx and Sol 3-104-xx model fans. Follow illustrations (Figures 1-4) as needed.
1. If already attached, remove bottom cover from the fan.
2. Remove three screws around the inside perimeter of the bottom plate assembly (Fig. 1).
3. Make polorized connections of LED module to the fan (White to White and Blue to Blue) (Fig. 2).
4. Replace screws removed in step 2 to connect the LED module to the fan (Fig. 3).
5. Replace bottom cover with the acrylic lens provided with the kit by lining the teeth inside the bottom
plate with the slots in the lens. Insert lens and turn clockwise to secure (Fig. 4).
(Fig. 1) (Fig. 3)
(Fig. 2) (Fig. 4)
Sol 3-104-XX model
Fan motor
assembly
Fan motor
assembly
Bottom plate
assembly Bottom plate
assembly
Acrylic
lens
Acrylic
cover slot
Bottom
plate teeth
Bottom
plate
LED
wire
Fan
wire
Remove
screws
Replace
screws
LED
module
LED
module
advertisement
Key Features
- LED light upgrade
- Compatible with Coda 3-103-xx and Sol 3-104-xx fans
- Easy installation
- Includes acrylic lens
- Energy-efficient
Related manuals
Frequently Answers and Questions
What models of ceiling fans are compatible with this LED kit?
This LED kit is compatible with Oxygen Coda 3-103-xx and Sol 3-104-xx model ceiling fans. Please refer to the kit packaging or the instructions for specific model numbers.
How do I install the LED module?
The installation process is outlined in the instruction manual, included with the kit. It involves removing the fan's bottom cover, connecting the LED module to the fan's wiring, and replacing the bottom cover with the provided acrylic lens. Detailed instructions, including illustrations, are provided in the manual.
What type of bulbs are included with the kit?
The kit is specifically designed for use with LED modules. It includes LED bulbs that are compatible with the provided LED module. The kit does not include standard incandescent bulbs. Refer to the manual for more detail on the specific type of bulbs used.
How do I change the bulbs once they need replacing?
To replace the bulbs, you will need to detach the LED module from the fan. This process is usually outlined in the instruction manual, which will also provide directions on how to properly dispose of the old bulbs.
advertisement
