PiXORD PB731I Quick guide

iPixord Quick Start Guide
1. Plug and Play IP Camera
Step 1. Connect IP camera with router via network cable.
Step 2. Power-on IP cam.
Please also ensure your router’s DHCP is activated.
2. iPixord Cloud Login
2.1 Visit http://www.ipixord.com
2.2 Login with account and password.

2.3 Or “Create Account” if haven’t registered one yet.
 Google Login
Use your Google account login iPixord. It’s also support Google drive store function.

 Normal account Login
3. Bind The IP Camera
3.1 Click “Settings” at the bottom page.

3.2 Click will lead you to a pop-up screen asking “Click ok to register your devices” to add
new devices on iPixord.
3.3 Fill in IP camera’s MAC address and activated code listed on the back of the camera, and
then click “Apply“.
Check follow user name & password card for MAC address and Activate code.