PiXORD PD614E(F/V) User Manual
PiXORD PD614E(F/V) is a powerful 2-megapixel network camera designed for indoor surveillance. It utilizes H.264-AVC compression for efficient video streaming, boasts Motion JPEG support for flexibility, and offers multiple independent video streams. This camera is ideal for commercial, banking, government, educational, and airport settings. It features two-way audio for communication, on-board motion detection for security alerts, and a Micro SD card slot for local storage.
advertisement
User’s Manual
PiXORD H.264 Series
2-Megapixel Network Camera
PD614/PD614E
Version 1.1
Date: 10/24/2011
PiXORD H.264 Series
2-Megapixel Network Camera
PD614/PD614E
Version 1.1
Date: 10/24/2011
Content
Notices ........................................................................................................................... 3
Introduction .................................................................................................................... 5
Installation...................................................................................................................... 6
1. Hardware ............................................................................................................ 6
2. Software Installation .......................................................................................... 7
3. Network Configuration ...................................................................................... 8
Access to the Camera ................................................................................................... 12
Video and Image Configuration ................................................................................... 14
Video .................................................................................................................... 14
Camera ................................................................................................................. 20
Event Handling .................................................................................................... 22
Local Storage and Schedule Recording ............................................................... 26
Network Configuration ........................................................................................ 28
System Options .................................................................................................... 31
Web Interface Customization ............................................................................... 34
Troubleshooting ........................................................................................................... 36
Check firmware version ....................................................................................... 36
Upgrade device firmware ..................................................................................... 37
Restore Factory Default Settings ......................................................................... 38
Video Streams Specification ................................................................................ 39
Notices ........................................................................................................................... 3
Introduction .................................................................................................................... 5
Installation...................................................................................................................... 6
1. Hardware ............................................................................................................ 6
2. Software Installation .......................................................................................... 7
3. Network Configuration ...................................................................................... 8
Access to the Camera ................................................................................................... 12
Video and Image Configuration ................................................................................... 14
Video .................................................................................................................... 14
Camera ................................................................................................................. 20
Event Handling .................................................................................................... 22
Local Storage and Schedule Recording ............................................................... 26
Network Configuration ........................................................................................ 28
System Options .................................................................................................... 31
Web Interface Customization ............................................................................... 34
Troubleshooting ........................................................................................................... 36
Check firmware version ....................................................................................... 36
Upgrade device firmware ..................................................................................... 37
Restore Factory Default Settings ......................................................................... 38
Video Streams Specification ................................................................................ 39
3
Notices
This user manual is intended for administrators and users of the PiXORD PD614 Series
Network Camera, including instructions for using and managing the camera on your network.
The use of surveillance devices may be prohibited by law in your country. It is the user’s
responsibility to ensure that the operation of such devices is legal before installing this unit for
its intended use.
Before the Network Camera is installed, all the safety and operating instructions should be
carefully read and followed to avoid damage due to faulty assembly and installation. This also
ensures the product is used properly as intended.
Heed all warnings
Do not drop or strike this equipment
Sensitive electronics inside the camera are vulnerable to excessive strike.
Do not install the equipment near any flames or heat sources
Excessive heat could damage this equipment.
Do not cover cloth or to install this equipment in poorly ventilated places.
Overheating could damage this equipment.
Do not expose this equipment to rain or moisture. Do not touch the power
connection with wet hands
Risk of short circuit, electric shock or fire
Do not damage the power cord or leave it under pressure
Risk of fire or shock circuit
To reduce the risk of electric shock, do not remove the Cover (or Back).
No user-serviceable parts inside. Misusage, improper, and negligence could
damage this equipment. Need to refer servicing to qualified service personnel.
Do not continue to operate if there appears to be fault.
If the unit ceases to function, contact qualified service personnel for help.
All work related to the installation of this product should be made by qualified
service personnel or system installers.
Liability
PiXORD Corporation reserves the right to make corrections, modifications, enhancements,
improvements, and other changes to its products and services at any time and to discontinue
any product or service without notice. Customers should obtain the latest relevant information
before placing orders and should verify that such information is current and complete. All
Notices
This user manual is intended for administrators and users of the PiXORD PD614 Series
Network Camera, including instructions for using and managing the camera on your network.
The use of surveillance devices may be prohibited by law in your country. It is the user’s
responsibility to ensure that the operation of such devices is legal before installing this unit for
its intended use.
Before the Network Camera is installed, all the safety and operating instructions should be
carefully read and followed to avoid damage due to faulty assembly and installation. This also
ensures the product is used properly as intended.
Heed all warnings
Do not drop or strike this equipment
Sensitive electronics inside the camera are vulnerable to excessive strike.
Do not install the equipment near any flames or heat sources
Excessive heat could damage this equipment.
Do not cover cloth or to install this equipment in poorly ventilated places.
Overheating could damage this equipment.
Do not expose this equipment to rain or moisture. Do not touch the power
connection with wet hands
Risk of short circuit, electric shock or fire
Do not damage the power cord or leave it under pressure
Risk of fire or shock circuit
To reduce the risk of electric shock, do not remove the Cover (or Back).
No user-serviceable parts inside. Misusage, improper, and negligence could
damage this equipment. Need to refer servicing to qualified service personnel.
Do not continue to operate if there appears to be fault.
If the unit ceases to function, contact qualified service personnel for help.
All work related to the installation of this product should be made by qualified
service personnel or system installers.
Liability
PiXORD Corporation reserves the right to make corrections, modifications, enhancements,
improvements, and other changes to its products and services at any time and to discontinue
any product or service without notice. Customers should obtain the latest relevant information
before placing orders and should verify that such information is current and complete. All
4
products are sold subject to PiXORD Corporation’s terms and conditions of sale supplied at
the time of order acknowledgment.
PiXORD is not responsible or liable for the resale of its products with statements different from
or beyond the specification/parameters stated by PiXORD. Customers are responsible for their
applications using PiXORD products. To minimize the risks associated with customer
applications, customers should provide adequate operating safeguards. PiXORD is under no
obligation to provide any further technical support service or product/software alteration
beyond PiXORD's representation.
PiXORD products are not authorized for use in safety-critical applications where a failure of the
PiXORD product would cause severe personal injury or death, unless officers of the parties
have executed an agreement specifically governing such use.
Reproduction of PiXORD information or datasheets with alteration is an unfair and deceptive
business practice. PiXORD is not responsible or liable for any such statements.
Every care has been taken of this manual. If there are any inaccuracies or omissions, please
inform your local office. PiXORD Corporation cannot be held responsible for any typographical
or technical errors. PiXORD Corporation is not liable or responsible for incidental or damages
caused by mishandling.
Trademarks
All names used in this manual for hardware and software are probably registered trademarks
of respective companies. PiXORD is a registered trademark of PiXORD Corporation. All rights
reserved.
Support
If you require any technical assistance, please contact your PiXORD reseller. You can connect
to the Internet PiXORD’s website: www.pixord.com for below information,
Download user documentation and firmware updates at PiXORD Support
( http://www.pixord.com/support/support.asp)
Find answers to resolved problems in the FAQ database. Or contact our FAE at technical
support (http://www.pixord.com/contact2.asp)
products are sold subject to PiXORD Corporation’s terms and conditions of sale supplied at
the time of order acknowledgment.
PiXORD is not responsible or liable for the resale of its products with statements different from
or beyond the specification/parameters stated by PiXORD. Customers are responsible for their
applications using PiXORD products. To minimize the risks associated with customer
applications, customers should provide adequate operating safeguards. PiXORD is under no
obligation to provide any further technical support service or product/software alteration
beyond PiXORD's representation.
PiXORD products are not authorized for use in safety-critical applications where a failure of the
PiXORD product would cause severe personal injury or death, unless officers of the parties
have executed an agreement specifically governing such use.
Reproduction of PiXORD information or datasheets with alteration is an unfair and deceptive
business practice. PiXORD is not responsible or liable for any such statements.
Every care has been taken of this manual. If there are any inaccuracies or omissions, please
inform your local office. PiXORD Corporation cannot be held responsible for any typographical
or technical errors. PiXORD Corporation is not liable or responsible for incidental or damages
caused by mishandling.
Trademarks
All names used in this manual for hardware and software are probably registered trademarks
of respective companies. PiXORD is a registered trademark of PiXORD Corporation. All rights
reserved.
Support
If you require any technical assistance, please contact your PiXORD reseller. You can connect
to the Internet PiXORD’s website: www.pixord.com for below information,
Download user documentation and firmware updates at PiXORD Support
( http://www.pixord.com/support/support.asp)
Find answers to resolved problems in the FAQ database. Or contact our FAE at technical
support (http://www.pixord.com/contact2.asp)
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
advertisement
Key Features
- 2 Megapixel H.264-AVC
- Motion JPEG Support
- Multiple Video Streams
- Two-way Audio
- Motion Detection
- Micro SD Card Storage
- PoE Model Available
- Web Interface
- Event Handling
Related manuals
Frequently Answers and Questions
How do I configure the network settings of the PD614E(F/V) camera?
You can use the IP Installer utility to quickly configure the camera's IP address and network settings. Refer to the manual for detailed steps.
What are the supported video formats for the PD614E(F/V) camera?
The PD614E(F/V) supports both H.264 and MJPEG video formats. You can choose the format based on your needs and network bandwidth.
Can I record video directly to the camera?
Yes, the PD614E(F/V) comes equipped with a Micro SD card slot. You can schedule recordings and store video locally on the card.
How do I access the live video feed from the PD614E(F/V) camera?
You can access the live video feed through the web interface by entering the camera's IP address in a web browser. The manual provides details on how to access the camera and set up login credentials.
advertisement
