POYNTING SPLT-0016 User Guide
Poynting SPLT-0016 is a versatile device that can be used as both a splitter and a combiner. When used as a splitter, it distributes the signal from a single antenna to two independent devices, ensuring low loss and good phase and amplitude balance. This is ideal for situations where obstacles obstruct the signal or poor signal coverage exists. Conversely, when used as a combiner, it combines the signals from two separate antennas to a single device, enabling antenna diversity and improved performance.
advertisement
Version 1.0
SPLT-16
User Guide
South Africa
Unit 4, N1 Industrial Park
Landmarks Ave
Samrand, 0157
South Africa
Tel: +27 12 657 0050
[email protected]
Europe
Kronstadler Straße 4,
81677 München
Germany
Tel: +49 89 2080 265 38
Mob.: +49 176 529 733 50
[email protected]
SPLT-16
User Guide
South Africa
Unit 4, N1 Industrial Park
Landmarks Ave
Samrand, 0157
South Africa
Tel: +27 12 657 0050
[email protected]
Europe
Kronstadler Straße 4,
81677 München
Germany
Tel: +49 89 2080 265 38
Mob.: +49 176 529 733 50
[email protected]
2 PCL-A-SPLT-0016
3Version 1.0
Index
4
7
9
10
1. Packing Check List
2. Introduction
3. Installation
Instructions
4. Splitter Mounting
Precautions
5. Cable Routing
6. Safety
11
12
Index
4
7
9
10
1. Packing Check List
2. Introduction
3. Installation
Instructions
4. Splitter Mounting
Precautions
5. Cable Routing
6. Safety
11
12
4
1. Packing Check List
PCL-A-SPLT-0016
Item Description Quantity
1. A-SPLT-0016
Only
1
1. Packing Check List
PCL-A-SPLT-0016
Item Description Quantity
1. A-SPLT-0016
Only
1
5
6
7
8
9
10
11
12
13
advertisement
Key Features
- Splitter/combiner function
- Low loss signal distribution
- Good phase and amplitude balance
- Antenna diversity capability
- Improved performance
- Easy installation
- Compact design
- Durable construction
Related manuals
Frequently Answers and Questions
What is the SPLT-16 used for?
The SPLT-16 can be used as a splitter or a combiner. As a splitter, it distributes a signal from one antenna to two devices, while as a combiner, it combines signals from two antennas into one.
How do I install the SPLT-16?
Mount the splitter on a flat, solid surface using suitable fasteners. Ensure adequate space for cable routing and avoid installing near heat sources, flammable gases, or chimneys. Keep antennas at least 0.5m away from other antennas and metal objects.
What safety precautions should I take when installing the SPLT-16?
Avoid installing near power lines, on wet or windy days, or during lightning or thunder. Wear protective clothing, rubber gloves, and shoes with rubber soles. Secure loose-fitting jewelry and tie back long hair.
advertisement