Allen-Bradley CEP7 E100 DIN Rail or Panel Adapter Installation Instructions

Installation Instructions
CEP7 DIN Rail or Panel Adapter Installation
(CEP7-1EPB, CEP7-1EPD, CEP7-1EPE)
WARNING: To prevent electrical shock, disconnect from power source before installing or servicing. Install in suitable enclosure. Keep free from contaminants. Follow
NFPA70E requirements.
At the end of its life, this
equipment should be
collected separately from
any unsorted municipal
waste.
25
Installation
CEP7-1EPB
CEP7-1EPD
CEP7-1EPE
"CLICK"
1
1
2
2
3
3
4
4
"CLICK"
CEP7-1EPB Panel Mount Dimensions in.
[mm]
See table below
for wire torques

PN-510683
DIR 10004184949 (Version 01)
Copyright © 2022 Sprecher+Schuh, Inc. All Rights Reserved. Printed in USA.
Publication CEP7-IN045B-EN-E - March 2022, Supersedes CEP7-IN045A-EN-E - August 2019
*PN-510683*
Sprecher + Schuh maintains current product environmental information on its website at http://www.sprecherschuh.com/library/approvals/compliance.html
Sprecher + Schuh, 15910 Int. Plaza Dr., Houston TX 77032, USA
Main Connections Rated Insulation Voltage (Ui): 690V AC
Rated Operational Voltage (Ue) IEC/UL: 690V AC / 600V AC
*FOR MULTIPLE CONDUCTOR APPLICATIONS THE SAME SIZE AND STYLE WIRE MUST BE USED.
CEP7-1EPD Panel Mount Dimensions CEP7-1EPE Panel Mount Dimensions
Wire Type # Wires Range Torque Range Torque Range Torque
1 Wire 1.5...16 mm² 4.0…35 mm²
2 Wires* 1.5...10 mm² 4.0…25 mm²
1 Wire 2.5...10 mm²
(14...8 AWG)
1.5...16 mm²
(16...6 AWG)
4.0…35 mm²
(12...1 AWG)
2 Wires* 2.5…6.0 mm²
(14...10 AWG)
1.5...10 mm²
(16…8 AWG)
4.0…35 mm²
(12...2 AWG)
Flexible Stranded
w/ Ferrule
Stranded / Solid
1.8 N•m
(16 lb-in)
2.3 N•m
(20 lb-in)
4.6 N•m
(40 lb-in)
CEP7-1EPB CEP7-1EPD CEP7-1EPE
2.5…6.0 mm²
(14...10 AWG)
CEP7 DIN Rail or Panel Adapter Installation 2