Allen-Bradley 1492-CM1746-M07_1746-to-5069 I/O Conversion System Installation Instructions
The Allen-Bradley 1492-CM1746-M07_1746-to-5069 I/O Conversion System is a versatile device that allows you to connect signals from 1746 modules to 5069 modules. It features a removable terminal block with 18 points for direct connection and a female connector for easy integration. This conversion module supports RTD input and is compatible with both 2-wire and 3-wire RTD configurations. To ensure proper operation, it is crucial to correctly match the conversion module to the existing I/O modules.
advertisement
Installation Instructions
1746-to-5069 I/O Conversion System
(Cat 1492-CM1746-M07)
Before installation make sure that: (EN)
- The conversion module is matched correctly to the
- There are no uninsulated wires that could cause
danger for user or installer.
- Контроллер отключен.
- Переходной модуль подходит к существующим
модулям ввода/вывода.
- Отсутствуют неизолированные провода, которые
могут представлять опасность для пользователя или
монтажника.
WARNING: To prevent electrical shock, disconnect from power source before
installing or servicing. Follow NFPA 70E requirements. Install in suitable
enclosure. Keep free from contaminants. Installation, adjustments, putting into
service, use, assembly, disassembly, and maintenance shall be carried out by
suitably trained personnel in accordance with applicable code of practice. In case
of malfunction or damage, no attempts at repair should be made. The product
should be returned to the manufacturer for repair. Do not dismantle the product.
1. Description: (EN)
This conversion module may be used to connect
signals from 1746 modules to 5069 modules. The
conversion module is an 18 point removable
terminal block which connects directly to the 5069
modules. The other end is a female connector to
connected directly.
С одной стороны переходного модуля 1492
расположена съемная 18-контактная клеммная
колодка, предназначенная для непосредственного
находится гнездо для непосредственной установки
устройствам.
(EN) (RU)
1746-to-5069 I/O Conversion System
(Cat 1492-CM1746-M07)
Before installation make sure that: (EN)
- The conversion module is matched correctly to the
- There are no uninsulated wires that could cause
danger for user or installer.
- Контроллер отключен.
- Переходной модуль подходит к существующим
модулям ввода/вывода.
- Отсутствуют неизолированные провода, которые
могут представлять опасность для пользователя или
монтажника.
WARNING: To prevent electrical shock, disconnect from power source before
installing or servicing. Follow NFPA 70E requirements. Install in suitable
enclosure. Keep free from contaminants. Installation, adjustments, putting into
service, use, assembly, disassembly, and maintenance shall be carried out by
suitably trained personnel in accordance with applicable code of practice. In case
of malfunction or damage, no attempts at repair should be made. The product
should be returned to the manufacturer for repair. Do not dismantle the product.
1. Description: (EN)
This conversion module may be used to connect
signals from 1746 modules to 5069 modules. The
conversion module is an 18 point removable
terminal block which connects directly to the 5069
modules. The other end is a female connector to
connected directly.
С одной стороны переходного модуля 1492
расположена съемная 18-контактная клеммная
колодка, предназначенная для непосредственного
находится гнездо для непосредственной установки
устройствам.
(EN) (RU)
1746-NR4 5069-IY4 1746-NR4 5069-IY4
2. : (RU)2. Conversions: (EN)
A
mode in Studio 5000 for both 2-wire and 3-wire RTD.
Refer user manual at the following link for details on
con
Все используемые каналы RTD должны быть
настроены как 3-проводной режим в Studio 5000 как
для 2-проводного, так и для 3-проводного RTD.
В следующей ссылке обратитесь к руководству
пользователя по настройке модуля 5069-IY4.
https://literature.rockwellautomation.com/idc/groups/literature/documents/um/5069-um005_-en-p.pdf
PN-550616
DIR 10004916427 (Version 00)
Copyright © 2019 Rockwell Automation, Inc. All Rights Reserved. Printed in USA.Publication 1492-IN144A-EN-E - January 2020
Allen-Bradley, Rockwell Software, and Rockwell Automation are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
Rockwell Automation maintains current product environmental compliance information on its website at rok.auto/pec.
EEE Yönetmeli ine Uygundur.
Rockwell Automation Support
For Technical Support, visit ROK.AUTO/SUPPORT.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Violet
Green
Orange
Gray
Blue
Yellow
White/Blue
White/Yellow
White/Red
White/Violet
White/Green
White/Orange
Black & Red & White
2 Input 0+
3 Input 0-
4 RTD-
5 Input 1+
6 Input 1-
7 RTD-
8 Input 2+
9 Input 2-
10 RTD-
13 Input 3+
14 Input 3-
15 RTD-
16 Shield
Cable RTB18
Conversion module - 1492-CM1746-M07
Field side
connector PCB
Shield
Ch0 RTD
Ch1 RTD
Ch0 Sense
Ch1 Sense
Ch0 Return
Ch1 Return
Shield
Shield
Ch2 RTD
Ch3 RTD
Ch2 Sense
Ch3 Sense
Ch2 Return
Ch3 Return
Shield
Shield
Shield Brown
Red
Orange
Yellow
Green
Blue
Violet
Gray
White
White/Black
White/Red
White/Orange
White/Yellow
White/Green
White/Blue
White/Violet
White/Gray
Wh-Bl/Brown
---
Black
White/Brown
White/Gray &
White/Black &
Wh-Bl/Brown &
Drain wire
17 Shield
Max Voltage : +-10V
Max current per channel : 20mA
Operating temp : 0…+60 C
Storage temp : -40…+85 C
Connector type : 18 pins
Cable length : approx. 59cm (23 in.)
3. (RU)
3. Parameter description: (EN)
4. Graphic connection flow: (EN)
4. : (RU)
2. : (RU)2. Conversions: (EN)
A
mode in Studio 5000 for both 2-wire and 3-wire RTD.
Refer user manual at the following link for details on
con
Все используемые каналы RTD должны быть
настроены как 3-проводной режим в Studio 5000 как
для 2-проводного, так и для 3-проводного RTD.
В следующей ссылке обратитесь к руководству
пользователя по настройке модуля 5069-IY4.
https://literature.rockwellautomation.com/idc/groups/literature/documents/um/5069-um005_-en-p.pdf
PN-550616
DIR 10004916427 (Version 00)
Copyright © 2019 Rockwell Automation, Inc. All Rights Reserved. Printed in USA.Publication 1492-IN144A-EN-E - January 2020
Allen-Bradley, Rockwell Software, and Rockwell Automation are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
Rockwell Automation maintains current product environmental compliance information on its website at rok.auto/pec.
EEE Yönetmeli ine Uygundur.
Rockwell Automation Support
For Technical Support, visit ROK.AUTO/SUPPORT.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Violet
Green
Orange
Gray
Blue
Yellow
White/Blue
White/Yellow
White/Red
White/Violet
White/Green
White/Orange
Black & Red & White
2 Input 0+
3 Input 0-
4 RTD-
5 Input 1+
6 Input 1-
7 RTD-
8 Input 2+
9 Input 2-
10 RTD-
13 Input 3+
14 Input 3-
15 RTD-
16 Shield
Cable RTB18
Conversion module - 1492-CM1746-M07
Field side
connector PCB
Shield
Ch0 RTD
Ch1 RTD
Ch0 Sense
Ch1 Sense
Ch0 Return
Ch1 Return
Shield
Shield
Ch2 RTD
Ch3 RTD
Ch2 Sense
Ch3 Sense
Ch2 Return
Ch3 Return
Shield
Shield
Shield Brown
Red
Orange
Yellow
Green
Blue
Violet
Gray
White
White/Black
White/Red
White/Orange
White/Yellow
White/Green
White/Blue
White/Violet
White/Gray
Wh-Bl/Brown
---
Black
White/Brown
White/Gray &
White/Black &
Wh-Bl/Brown &
Drain wire
17 Shield
Max Voltage : +-10V
Max current per channel : 20mA
Operating temp : 0…+60 C
Storage temp : -40…+85 C
Connector type : 18 pins
Cable length : approx. 59cm (23 in.)
3. (RU)
3. Parameter description: (EN)
4. Graphic connection flow: (EN)
4. : (RU)
advertisement
Key Features
- Connects 1746 to 5069 modules
- 18-point terminal block
- Supports RTD input
- Compatible with 2/3-wire RTD
- Removable terminal block
Related manuals
Frequently Answers and Questions
What is the purpose of this conversion module?
This module converts signals from 1746 modules to 5069 modules, enabling communication between these different systems.
What type of input does this module support?
It supports RTD input, which can be configured as either 2-wire or 3-wire.
How many connections can I make with this module?
The module has an 18-point terminal block, allowing for multiple connections.
Is the terminal block removable?
Yes, the terminal block is removable, making the installation and maintenance process easier.
What are the maximum voltage and current ratings for this module?
The maximum voltage is +-10V, and the maximum current per channel is 20mA.
advertisement