Allen-Bradley 1585BP Bulkhead Coupler Installation Instructions

The Allen-Bradley 1585BP Bulkhead Coupler is a robust connector designed for telecommunication applications. It is equipped with a dust cap for protection and features a sturdy construction for reliable performance. The coupler can be used in various installations, both in industrial and commercial settings. It's compatible with panel thicknesses ranging from 0.035 to 0.120 inches, making it a versatile option for many applications.

1
Installation Instructions
Bulletin 1585BP Bulkhead Coupler
IMPORTANT: SAVE THESE INSTRUCTIONS FOR FUTURE USE.
Refer to the product catalog pages for additional information.
2
2.26 N•m
(20 lbs)
4A
Place gasket end on connector
against panel.
Panel Thickness
0.89…3 mm (0.035…0.120 in.)
with Dust Cap, Max Thickness:
1.83 mm (0.072 in.))
1
3
5A
Tighten lock out.

2
10000029983 Ver 00
January 27, 2009
Printed in USA
Optional Dust Cap
4B
If dust cap is used, put the lanyard cap on connector
and use second lock out and tighten to torque valve.
5B
ATTENTION: To assist safe installation, comply
with the following:
A. Use caution when installing or modifying
telecommunications circuits.
B. Never touch uninsulated wire terminals
unless the circuit has been disconnected.
C. Never install this device in a wet location.
D. Never install wiring during a lightning storm.