Allen-Bradley Solar Visor Accessory Installation Instructions
The Allen-Bradley Solar Visor Accessory is designed to enhance the visibility of the PanelView Plus 1250 or PanelView Plus CE 1250 touch outdoor high-bright display in direct sunlight. The accessory kit includes a solar visor, clips, and locking nuts for easy installation. It is vital to drill the specified holes and secure the visor clips with the correct torque for a secure and reliable operation.
advertisement
Installation Instructions
Original Instructions
Solar Visor Accessory
Catalog Number 2711P-RVT12
Language Page
English 3
Français 5
Deutsch 7
Italiano 9
Español 11
Português 13
Original Instructions
Solar Visor Accessory
Catalog Number 2711P-RVT12
Language Page
English 3
Français 5
Deutsch 7
Italiano 9
Español 11
Português 13
2 Rockwell Automation Publication 2711P-IN025C-MU-P - March 2007
Solar Visor Accessory
Important User Information
Solid state equipment has operational characteristics differing from those of electromechanical equipment. Safety Guidelines for
the Application, Installation and Maintenance of Solid State Controls (publication SGI-1.1 available from your local Rockwell
Automation sales office or online at http://literature.rockwellautomation.com) describes some important differences between
solid state equipment and hard-wired electromechanical devices. Because of this difference, and also because of the wide variety
of uses for solid state equipment, all persons responsible for applying this equipment must satisfy themselves that each intended
application of this equipment is acceptable.
In no event will Rockwell Automation, Inc. be responsible or liable for indirect or consequential damages resulting from the use or
application of this equipment.
The examples and diagrams in this manual are included solely for illustrative purposes. Because of the many variables and
requirements associated with any particular installation, Rockwell Automation, Inc. cannot assume responsibility or liability for
actual use based on the examples and diagrams.
No patent liability is assumed by Rockwell Automation, Inc. with respect to use of information, circuits, equipment, or software
described in this manual.
Reproduction of the contents of this manual, in whole or in part, without written permission of Rockwell Automation, Inc., is
prohibited.
Throughout this manual, when necessary, we use notes to make you aware of safety considerations.
Identifies information about practices or circumstances that can cause an explosion in a hazardous
environment, which may lead to personal injury or death, property damage, or economic loss.
IMPORTANT Identifies information that is critical for successful application and understanding of the product.
Identifies information about practices or circumstances that can lead to personal injury or death,
property damage, or economic loss. Attentions help you to identify a hazard, avoid a hazard, and
recognize the consequences.
Labels may be on or inside the equipment, for example, a drive or motor, to alert people that
dangerous voltage may be present.
Labels may be on or inside the equipment, for example, a drive or motor, to alert people that surfaces
may reach dangerous temperatures.
Solar Visor Accessory
Important User Information
Solid state equipment has operational characteristics differing from those of electromechanical equipment. Safety Guidelines for
the Application, Installation and Maintenance of Solid State Controls (publication SGI-1.1 available from your local Rockwell
Automation sales office or online at http://literature.rockwellautomation.com) describes some important differences between
solid state equipment and hard-wired electromechanical devices. Because of this difference, and also because of the wide variety
of uses for solid state equipment, all persons responsible for applying this equipment must satisfy themselves that each intended
application of this equipment is acceptable.
In no event will Rockwell Automation, Inc. be responsible or liable for indirect or consequential damages resulting from the use or
application of this equipment.
The examples and diagrams in this manual are included solely for illustrative purposes. Because of the many variables and
requirements associated with any particular installation, Rockwell Automation, Inc. cannot assume responsibility or liability for
actual use based on the examples and diagrams.
No patent liability is assumed by Rockwell Automation, Inc. with respect to use of information, circuits, equipment, or software
described in this manual.
Reproduction of the contents of this manual, in whole or in part, without written permission of Rockwell Automation, Inc., is
prohibited.
Throughout this manual, when necessary, we use notes to make you aware of safety considerations.
Identifies information about practices or circumstances that can cause an explosion in a hazardous
environment, which may lead to personal injury or death, property damage, or economic loss.
IMPORTANT Identifies information that is critical for successful application and understanding of the product.
Identifies information about practices or circumstances that can lead to personal injury or death,
property damage, or economic loss. Attentions help you to identify a hazard, avoid a hazard, and
recognize the consequences.
Labels may be on or inside the equipment, for example, a drive or motor, to alert people that
dangerous voltage may be present.
Labels may be on or inside the equipment, for example, a drive or motor, to alert people that surfaces
may reach dangerous temperatures.
Installation Instructions
Solar Visor Accessory
Catalog Number 2711P-RVT12
English
Overview
This accessory is recommended for use with the PanelView Plus 1250 or PanelView Plus CE
1250 touch outdoor high-bright display.
The accessory kit includes:
Solar visor (1)
Visor clips (3)
Locking nuts, M4 (6)
Install the Visor
1. Drill six holes, 4.8 mm (0.188 in.) as indicated.
36
(1.42)
72.5 (2.86)
Ø4.8
(0.188)
30.5 (1.20)
153.5 (6.05) 19.3 (0.76)
282
(11.12)
257
(10.11)
338
(13.29)
Panel Cut-Out
409.5 (16.12)
363 (14.30)
Bezel Outline
Solar Visor Accessory
Catalog Number 2711P-RVT12
English
Overview
This accessory is recommended for use with the PanelView Plus 1250 or PanelView Plus CE
1250 touch outdoor high-bright display.
The accessory kit includes:
Solar visor (1)
Visor clips (3)
Locking nuts, M4 (6)
Install the Visor
1. Drill six holes, 4.8 mm (0.188 in.) as indicated.
36
(1.42)
72.5 (2.86)
Ø4.8
(0.188)
30.5 (1.20)
153.5 (6.05) 19.3 (0.76)
282
(11.12)
257
(10.11)
338
(13.29)
Panel Cut-Out
409.5 (16.12)
363 (14.30)
Bezel Outline
4 Rockwell Automation Publication 2711P-IN025C-MU-P - March 2007
Solar Visor Accessory
2. Insert visor clips through holes and secure each clip with two M4 self-locking nuts
supplied.
Torque to 1.13 Nm (10 lb-in). See illustration below for proper visor clip orientation.
3. Slide the solar visor down on to the unit.
The clips hold the visor in place.
Solar Visor
Visor Clips
Locking Nuts
Solar Visor Accessory
2. Insert visor clips through holes and secure each clip with two M4 self-locking nuts
supplied.
Torque to 1.13 Nm (10 lb-in). See illustration below for proper visor clip orientation.
3. Slide the solar visor down on to the unit.
The clips hold the visor in place.
Solar Visor
Visor Clips
Locking Nuts
5
6
7
8
9
10
11
12
13
14
15
16
advertisement
Key Features
- Enhances Visibility
- Outdoor Use
- High-Bright Display
- Easy Installation
- Secure Attachment
- PanelView Plus 1250 Compatibility
Related manuals
Frequently Answers and Questions
What type of displays is this accessory compatible with?
This accessory is designed for use with the PanelView Plus 1250 or PanelView Plus CE 1250 touch outdoor high-bright display, as stated in the viewed document.
How do I attach the visor clips?
Insert the visor clips through the drilled holes and secure each clip with two M4 self-locking nuts. Torque to 1.13 Nm (10 lb-in). Refer to the illustration in the viewed document for proper orientation.
What is the purpose of the solar visor?
The solar visor is designed to reduce glare from direct sunlight, improving the visibility of the display and enhancing user experience in outdoor environments.
advertisement