Allen-Bradley 509 Size 00 Enclosure Cover Installation Instructions
The Allen-Bradley 509 Size 00 Enclosure Cover is a component designed for use with Allen-Bradley overload relays. It provides a protective enclosure for the relay and features a reset button for manual operation. The cover is compatible with various Allen-Bradley overload relays including the Eutectic, SMP, and E1-Plus models.
advertisement
ATTENTION: To prevent electrical shock, disconnect from power source before installing or servicing.
Enclosure Cover Replacement
(Cat 509-TA_)
42052-141-01 (1)
Printed in U.S.A.
The enclosure cover is provided with the reset button assembled for the Eutectic or SMP overload relays,
Bulletin 592-JOV16 or 592-A_ _ T for the E1-Plus overload relay, Bulletin 592-EE_T, the following
modifications must be made:
1. Remove the large nut that secures the reset assembly to the cover.
2. Remove the reset assembly.
3. Add the two plastic rings provided in the plastic bag then the blue reset label with the text toward the plastic
rings.
4. Install the reset assembly into the cover and torque the large nut to to 30 lb.-in.
5. Check for proper reset button travel by manually tripping the overload relay, then install the cover and push the
reset button. remove the cover and check that the overload relay is reset.
Enclosure Cover Replacement
(Cat 509-TA_)
42052-141-01 (1)
Printed in U.S.A.
The enclosure cover is provided with the reset button assembled for the Eutectic or SMP overload relays,
Bulletin 592-JOV16 or 592-A_ _ T for the E1-Plus overload relay, Bulletin 592-EE_T, the following
modifications must be made:
1. Remove the large nut that secures the reset assembly to the cover.
2. Remove the reset assembly.
3. Add the two plastic rings provided in the plastic bag then the blue reset label with the text toward the plastic
rings.
4. Install the reset assembly into the cover and torque the large nut to to 30 lb.-in.
5. Check for proper reset button travel by manually tripping the overload relay, then install the cover and push the
reset button. remove the cover and check that the overload relay is reset.
advertisement
Key Features
- Protective enclosure
- Reset button
- Eutectic, SMP, E1-Plus compatibility
- Manual operation
Related manuals
Frequently Answers and Questions
How do I install the Allen-Bradley 509 Size 00 Enclosure Cover?
The instruction manual provides detailed steps for installing the enclosure cover. It includes instructions on how to remove and replace the reset assembly and how to ensure proper reset button travel.
What types of overload relays are compatible with the Allen-Bradley 509 Size 00 Enclosure Cover?
This enclosure cover is compatible with the Eutectic or SMP overload relays, Bulletin 592-JOV16 or 592-A_ _ T for the E1-Plus overload relay, Bulletin 592-EE_T.
How do I check for proper reset button travel?
After installing the reset assembly, manually trip the overload relay and then install the cover. Push the reset button. Remove the cover and check that the overload relay is reset.
advertisement