Allen-Bradley 1394-CPDC Cables Installation Instructions
Allen-Bradley 1394-CPDC Cables are designed to connect two 1394 systems together, allowing for communication and data transfer between them. These cables are available in two lengths: 1.5 meters (4.92 ft) and 3 meters (9.84 ft), offering flexibility in system configuration. They are compatible with the 1394 Digital AC Multi-Axis Motion Control System and provide a reliable connection for high-speed data transmission.
advertisement
Publication 1394-5.14 - September 1998
Installation Instructions
Installing Your 1394-CPDC Cables
This document illustrates the installation of the 1394-CPDC cables
and is used in conjunction with the 1394 Digital AC Multi-Axis
Motion Control System User Manual (publication 1394-5.0). You can
link two 1394 systems together using either a 1.5 meter (4.92 ft) cable
(catalog number 1394-CPDC-0015) or 3 meter (9.84 ft) cable
(catalog number 1394-CPDC-0030).
Wiring 1394-DCLMs Together To wire 1394-DCLMs together:
1. Remove the power plug from the front underside of each 1394-
DCLM using a phillips screwdriver.
Figure 1
Removing the Power Plug
2. Connect an end of the cable to each 1394-DCLM.
Figure 2
Connecting the Cable to the 1394-DCLMs
3. Secure the cable to the 1394-DCLMs with the provided screws
(4M x 10) using 12-15in./lbs of torque.
Power Plug
DC Link
Module
1394 Digital Servo Controller
System Module
Allen-Bradley
Screws
Cable End
DC Link
Module
1394 Digital Servo Controller
System Module
Allen-Bradley
DC Link
Module
1394 Digital Servo Controller
System Module
Allen-Bradley
Cable End
Installation Instructions
Installing Your 1394-CPDC Cables
This document illustrates the installation of the 1394-CPDC cables
and is used in conjunction with the 1394 Digital AC Multi-Axis
Motion Control System User Manual (publication 1394-5.0). You can
link two 1394 systems together using either a 1.5 meter (4.92 ft) cable
(catalog number 1394-CPDC-0015) or 3 meter (9.84 ft) cable
(catalog number 1394-CPDC-0030).
Wiring 1394-DCLMs Together To wire 1394-DCLMs together:
1. Remove the power plug from the front underside of each 1394-
DCLM using a phillips screwdriver.
Figure 1
Removing the Power Plug
2. Connect an end of the cable to each 1394-DCLM.
Figure 2
Connecting the Cable to the 1394-DCLMs
3. Secure the cable to the 1394-DCLMs with the provided screws
(4M x 10) using 12-15in./lbs of torque.
Power Plug
DC Link
Module
1394 Digital Servo Controller
System Module
Allen-Bradley
Screws
Cable End
DC Link
Module
1394 Digital Servo Controller
System Module
Allen-Bradley
DC Link
Module
1394 Digital Servo Controller
System Module
Allen-Bradley
Cable End
Publication 1394-5.14 - September 1998 191883
Copyright 1998 Allen-Bradley Company, Inc. Printed in USA
Copyright 1998 Allen-Bradley Company, Inc. Printed in USA
advertisement
Key Features
- 1.5m & 3m lengths
- 1394 system connectivity
- High-speed data transfer
- Reliable connection
- Compatible with 1394 Digital AC Multi-Axis Motion Control System
Related manuals
Frequently Answers and Questions
What is the purpose of the 1394-CPDC cables?
These cables are used to connect two 1394 systems together, enabling communication and data transfer.
What are the available lengths for the 1394-CPDC cables?
You can choose from 1.5 meter (4.92 ft) or 3 meter (9.84 ft) cables.
What is the catalog number for the 1.5 meter cable?
The 1.5 meter cable has the catalog number 1394-CPDC-0015.
How do I properly connect the 1394-CPDC cables to the 1394-DCLMs?
Refer to steps 2 and 3 in the "Wiring 1394-DCLMs Together" section in the viewed document for detailed instructions.
advertisement