Chapter 2
Basic Operation
This Chapter IncludesN
>
>
>
English−15
Using the OSD (On-Screen Display) Controls
OSD (On-Screen Display) control button on the front of the monitor function as followsN
• To open the OSD menu, press the SELECT button. Please refer to the “Control Panel” on page 10
for basic functions of the buttons.
• Below is an OSD structure. Tables listing all options available in the OSD menu are located in “Appendix A OSD Controls
List” on page 23 .
Main Menu (Icon Select) Main Menu (Adjust)
Press
SELECT button
Press
SELECT button again
Press SELECT button
ExampleN [OSD TOOL] sub-menu
Press SELECT button
Press
SELECT button
Press – or
+ button to select an icon
Sub-menu (Icon Select)
Press
– or + button
Press
SELECT button
Sub-menu (Adjust)
English−16
Select by using
– or + button
Adjust by using
– or + button
Changing the Input
Changing the Input
To change the signal input, press the INPUT/RESET button.
NOTE::
If there is no active video signal on another input the monitor switches back to the current input.
For HDCP Content
HDCP is a system for preventing illegal copying of video data sent over a digital signal. If you are unable to view material via the digital inputs, this does not necessarily mean that the monitor is not functioning properly. ith the implementation of HDCP, there may be cases in which certain content is protected by HDCP and might not be displayed due to the decision/intention of the HDCP community (Digital Content Protection, LLC). HDCP video content is generally commercially produced Blu-rays and
DVDs, television broadcast, and streaming media services.
Power management function LED indicator patterns
The power management function is an energy saving feature that automatically reduces the power consumption of the monitor when the keyboard or the mouse has not been used for a fixed period.
Mode
Maximum operation
LED indicator
Blue
Power consumption
Approx. 19 (AS173M)
Approx. 20 (AS194Mi)
All functions work.
Condition
Normal operation Blue Approx. 10 (AS173M)
Approx. 12 (AS194Mi)
0.30
Default setting.
Energy saving mode Amber The monitor has passed a certain amount of time with no video signal input.
Off mode Off 0.25
Turn off the monitor by the button.
NOTE: •
Power consumption depends on the setting of the OSD or which devices are connected to the monitor.
•
This function works with computers that support VESA approved DPM (Display Power Management).
English−17
