en. Bosch SMU6ZAI00S/10, SMU6ZAI00S/04, SMU6ZAI00S/13, SMU6ZAI00S/01, SMU6ZAI00S/17, SMU6ZAI00S/08
Advertisement
Advertisement
en
Table of contents
Safety ............................................... 4
General information.......................... 4
Intended use..................................... 4
Restriction on user group................. 4
Safe installation ................................ 5
Safe use ........................................... 6
Damaged appliance ......................... 8
Risk to children ................................ 9
Preventing material damage ........ 11
Safe installation .............................. 11
Safe use ......................................... 11
Environmental protection and saving energy................................ 12
Disposing of packaging ................. 12
Saving energy................................. 12
Zeolith drying ............................ 12
AquaSensor.................................... 13
Installation and connection.......... 13
Scope of supply ............................. 13
Installing and connecting the appliance ............................................ 13
Drainage connection ...................... 14
Drinking water connection ............. 14
Electrical connection ...................... 14
Familiarising yourself with your appliance............................... 15
Appliance ....................................... 15
Controls .......................................... 16
Programmes .................................. 18
Information for test institutes .......... 19
Favourite .................................... 19
Additional functions ..................... 20
Features......................................... 20
Top basket...................................... 21
Bottom basket ................................ 21
Cutlery basket ................................ 22
Etagere ........................................... 22
2
Folding prongs ............................... 22
Knife shelf....................................... 23
Basket heights................................ 23
Before using for the first time ...... 23
Performing the initial configuration.................................................. 23
Water softening system................ 24
Overview of water hardness settings................................................ 24
Setting the water softening system ................................................. 24
Special salt ..................................... 25
Switching off the water softening system ............................................ 25
Regeneration of the water softening system ............................ 26
Rinse aid system........................... 26
Rinse aid ........................................ 26
Setting the amount of rinse aid ...... 27
Switching the rinse aid system off ................................................... 27
Detergent ....................................... 27
Suitable detergents ........................ 27
Unsuitable detergents .................... 29
Information on detergents .............. 29
Adding detergent ........................... 29
Tableware ...................................... 30
Damage to glass and tableware .... 30
Arrange tableware .......................... 31
Removing tableware....................... 32
Basic operation ............................. 32
Switching on the appliance ............ 32
Setting a programme ..................... 32
Setting additional functions ............ 32
Setting timer programming ............ 32
Starting the programme ................. 33
Activating button lock..................... 33
Deactivate button lock.................... 33
Interrupting programme ................. 33
Terminate programme.................... 33
Switching off appliance .................. 33
Basic settings................................ 34
Overview of basic settings ............. 34
Changing basic settings................. 35
Home Connect .............................. 35
Home Connect quick start ............. 36
Home Connect settings.................. 36
Remote Start ............................... 36
Remote Diagnostics ...................... 37
Software update ............................. 37
Data protection............................... 37
Declaration of Conformity............... 37
Cleaning and servicing ................. 38
Cleaning the tub ............................. 38
Cleaning products .......................... 38
Tips on appliance care................... 38
Machine Care ............................. 38
Filter system ................................... 39
Cleaning spray arms ...................... 40
Troubleshooting............................ 42
Error code / Fault display / Signal................................................... 42
Washing results .............................. 44
Home Connect problem................. 51
Information on display panel.......... 51
Malfunctions ................................... 51
Mechanical damage....................... 52
Noise .............................................. 53
Clean wastewater pump................. 54
Transportation, storage and disposal ......................................... 54
Removing the appliance ................ 54
Protect appliance from frost........... 55
Transporting the appliance ............ 55
Disposing of old appliance ............ 55
en
Customer Service.......................... 55
AQUA-STOP guarantee .................. 56
Technical specifications............... 57
Information regarding Free and
Open Source Software ................... 57
3
en
Safety
Safety
Please read the safety information to ensure that you use the appliance safely.
General information
You can find general information for this instruction manual here.
¡
Read this instruction manual carefully. Only this will ensure you use the appliance safely and efficiently.
¡
This manual is intended for the user of the appliance.
¡
Follow the safety instructions and warnings.
¡
Keep the instruction manual and the product information safe for future reference or for the next owner.
¡
Check the appliance after unpacking it. Do not connect the appliance if it has been damaged in transit.
Intended use
Read the information on intended use to ensure that you use the appliance correctly and safely.
Only use this appliance:
¡
As specified in this instruction manual.
¡
For cleaning household tableware.
¡
In private households and in enclosed spaces in a domestic environment.
¡
Up to an altitude of max. 2500 m above sea level.
Restriction on user group
Avoid risks to children and vulnerable persons.
This appliance may be used by children aged 8 or over and by people who have reduced physical, sensory or mental abilities or inadequate experience and/or knowledge, provided that they are supervised or have been instructed on how to use the appliance safely and have understood the resulting dangers.
Children must not play with the appliance.
Cleaning and user maintenance must not be performed by children unless they are being supervised.
4
Safety
en
Keep children under the age of 8 years away from the appliance and power cable.
Safe installation
Follow these safety instructions when installing the appliance.
WARNING ‒ Risk of injury!
Improper installation may cause injury.
▶
When installing and connecting the appliance, follow the instructions in the manual and installation instructions.
WARNING ‒ Risk of electric shock!
¡
Improper installation is dangerous.
▶
Connect and operate the appliance only in accordance with the specifications on the rating plate.
▶
Connect the appliance to a power supply with alternating current only via a properly installed socket with earthing.
▶
The protective conductor system of the domestic electrical installation must be properly installed.
▶
Never equip the appliance with an external switching device, e.g. a timer or remote control.
▶
When the appliance is installed, the mains plug of the power cord must be freely accessible. If free access is not possible, an all-pole isolating switch must be installed in the permanent electrical installation according to the installation regulations.
▶
When installing the appliance, check that the power cable is not trapped or damaged.
¡
Cutting through the supply hose or immersing the Aqua-Stop valve in water is dangerous.
▶
Never immerse the plastic housing in water. The plastic housing on the supply hose contains an electric valve.
▶
Never cut through the supply hose. The supply hose contains electric power cables.
5
en
Safety
WARNING ‒ Risk of fire!
It is dangerous to use an extended power cord and non-approved adapters.
▶
Do not use extension cables or multiple socket strips.
▶
If the power cord is too short, contact Customer Service.
▶
Only use adapters approved by the manufacturer.
WARNING ‒ Risk of injury!
Hinges move when opening and closing the appliance door and can cause injury.
▶
If built-under or integrable appliances are not in a cavity so that one side is accessible, the hinge area must be covered at the side. Covers are available from Customer Service or specialist outlets.
WARNING ‒ Risk of tipping!
Improper installation may cause the appliance to tip up.
▶
Only install built-under or integrable appliances under a continuous worktop that is securely connected to adjacent cabinets.
Safe use
Follow these safety instructions when using the appliance.
WARNING ‒ Risk of serious harm to health!
Failure to comply with safety instructions and directions for use on packagings of detergent and rinse aid products may cause serious harm to health.
▶
Follow the safety instructions and directions for use on the packagings of detergent and rinse aid products.
WARNING ‒ Risk of explosion!
¡
Adding solvents to the interior of the appliance may cause explosions.
▶
Never add solvents to the interior of the appliance.
6
Safety
en
¡
Highly caustic alkaline or highly acidic cleaning agents in conjunction with aluminium parts in the interior of the appliance may cause explosions.
▶
Never use highly caustic alkaline or highly acidic cleaning agents, in particular commercial or industrial products, in conjunction with aluminium parts (e.g. grease filters of extractor hoods or aluminium pans), e.g. for the Machine Care programme.
WARNING ‒ Risk of injury!
¡
Leaving the appliance door open may result in injury.
▶
Only open the appliance door to load or unload tableware in order to prevent accidents, e.g. through tripping.
▶
Do not sit or stand on the appliance door when open.
¡
Knives and utensils with sharp points can cause injuries.
▶
Arrange knives and utensils with sharp points in the cutlery basket with the points downwards, on the knife shelf or in the cutlery drawer.
WARNING ‒ Risk of scalding!
If you open the appliance door while the programme is running, hot water may splash out of the appliance.
▶
Open the appliance door carefully if the programme is still running.
WARNING ‒ Risk of tipping!
Overfilling the Baskets may cause the appliance to tip up.
▶
Never overfill the Baskets with free-standing appliances.
WARNING ‒ Risk of electric shock!
¡
An ingress of moisture can cause an electric shock.
▶
Only use the appliance in enclosed spaces.
▶
Never expose the appliance to intense heat or humidity.
▶
Do not use steam- or high-pressure cleaners to clean the appliance.
7
en
Safety
¡
If the insulation of the power cord is damaged, this is dangerous.
▶
Never let the power cord come into contact with hot appliance parts or heat sources.
▶
Never let the power cord come into contact with sharp points or edges.
▶
Never kink, crush or modify the power cord.
WARNING ‒ Risk of burns!
The blow opening of the Zeolith container becomes hot and can cause burns.
▶
Never touch the blow opening of the Zeolith container.
Damaged appliance
Follow the safety instructions if the appliance is damaged.
WARNING ‒ Risk of electric shock!
¡
If the appliance or the power cord is damaged, this is dangerous.
▶
Never operate a damaged appliance.
▶
Never operate an appliance with a cracked or fractured surface.
▶
Never pull on the power cord to unplug the appliance. Always unplug the appliance at the mains.
▶
If the appliance or the power cord is damaged, immediately unplug the power cord or switch off the fuse in the fuse box and turn off the water tap.
▶
"Call Customer Service." → Page 55
▶
Repairs to the appliance should only be carried out by trained specialist staff.
¡
Incorrect repairs are dangerous.
▶
Repairs to the appliance should only be carried out by trained specialist staff.
▶
Only use genuine spare parts when repairing the appliance.
▶
If the power cord of this appliance is damaged, it must be replaced with a special connection cable, which is available from the manufacturer or his Customer Service.
8
Safety
en
Risk to children
Follow the safety instructions if there are children in your home.
WARNING ‒ Risk of suffocation!
¡
Children may put packaging material over their heads or wrap themselves up in it and suffocate.
▶
Keep packaging material away from children.
▶
Do not let children play with packaging material.
¡
Children may breathe in or swallow small parts, causing them to suffocate.
▶
Keep small parts away from children.
▶
Do not let children play with small parts.
WARNING ‒ Risk of harm to health!
Children can lock themselves in the appliance, thereby putting their lives at risk.
▶
With redundant appliances, unplug the power cord. Then cut through the cord and damage the lock on the appliance door beyond repair so that the appliance door will no longer close.
WARNING ‒ Risk of crushing!
With higher-level appliances, children can become crushed between the appliance door and cabinet doors underneath.
▶
Keep an eye on children when opening and closing the appliance door.
WARNING ‒ Risk of chemical burns!
Rinse aid and detergent may cause chemical burns to the mouth, throat and eyes.
▶
Keep children away from detergent and rinse aid products.
▶
Keep children away from the appliance when open. The water in the interior of the dishwasher is not drinking water. It may contain residues of detergents and rinse aid.
9
en
Safety
WARNING ‒ Risk of injury!
Children may get their fingers caught in the slots of the tablet collecting tray and injure themselves.
▶
Keep children away from the appliance when open.
WARNING ‒ Risk of suffocation!
Children may become trapped in the appliance and suffocate.
▶
Use the childproof lock if fitted.
▶
Never let children play with or operate the appliance.
10
Preventing material damage
Follow these instructions to prevent material damage to your appliance, accessories or other objects in your kitchen.
Safe installation
Follow the instructions when installing the appliance.
ATTENTION!
¡
Improper installation of the appliance may cause damage.
▶
If the dishwasher is installed above or below other domestic appliances, follow the information on installation in combination with a dishwasher in the in-
▶ stallation instructions for the individual appliances.
If there is no information or if the installation instructions do not include the relevant information, contact the manufacturer of these appliances to check that the dishwasher can be installed
▶
▶
▶
▶ above or below these appliances.
If no information is available from the manufacturer, the dishwasher should not be installed above or below such appliances.
To ensure the safe operation of all domestic appliances, continue following the installation instructions for the dishwasher.
Do not install the dishwasher under a hob.
Do not install the dishwasher near heat sources, e.g. radiators, heat storage tanks, ovens or other appliances that generate heat.
Preventing material damage
en
¡
Modified or damaged water hoses may result in material damage and damage to the appliance.
▶
▶
▶
Never kink, crush, modify or cut through water hoses.
Only use the water hoses supplied with the appliance or genuine spare hoses.
Never re-use water hoses that have been used before.
¡
If the water pressure is too high or too low, this may impair functioning of the appliance.
▶
Make sure that the water pressure in the water supply system is min. 50 kPa (0,5 bar) and max. 1000 kPa (10 bar).
▶
If the water pressure exceeds the maximum value specified, a pressure-reducing valve must be installed between the drinking water connection and the hose set of the appliance.
Safe use
Follow the instructions when using the appliance.
ATTENTION!
¡
Escaping water vapour can damage fitted units.
▶
When the programme ends, leave the appliance to cool down for a while before opening the door.
¡
Special salt can damage the tub due to corrosion.
▶
To make sure that any special salt that escapes is washed out of the tub, add the special salt to the dispenser for special salt immediately before the programme starts.
¡
Detergent may damage the water softening system.
▶
Only fill the dispenser of the water softening system with special dishwasher salt.
11
en
Environmental protection and saving energy
¡
Unsuitable cleaning agents may damage the appliance.
▶
▶
Do not use a steam cleaner.
So as not to scratch the finish on the appliance, do not use sponges with a rough surface or abrasive cleaning agents.
▶
To prevent corrosion, do not use sponge cloths on dishwashers with a stainless steel front or rinse such cloths thoroughly several times before using them for the first time.
Environmental protection and saving energy
Help protect the environment by using your appliance in a way that conserves resources and by disposing of reusable materials properly.
Saving energy
If you follow these instructions, your appliance will use less electricity and less water.
Use the Eco 50 ° programme.
The Eco 50 ° programme is energy-efficient and environmentally friendly.
If you do not have much tableware to wash, use the additional Half Load function.
1
The programme will adjust to a lower load and consumption will be reduced.
→ "Additional functions", Page 20
Zeolith drying automatically helps to save energy.
Disposing of packaging
The packaging materials are environmentally compatible and can be recycled.
▶
Sort the individual components by type and dispose of them separately.
Information about current disposal methods are available from your specialist dealer or local authority.
Zeolith drying
The appliance features a Zeolith container. Zeolith drying lets you save energy.
Zeolite is a mineral that can store moisture and heat energy and then release them again.
During dishwashing heat energy is used to heat up the washing water and dry the mineral.
During the drying phase moisture from the interior of the dishwasher is stored in the mineral and heat energy is released. The heat energy is blown out into the interior of the dishwasher with dry air. This speeds up and improves drying.
Zeolith drying therefore saves a great deal of energy.
1
Depending on the appliance specifications
12
Tip:
To avoid impairing Zeolith drying performance, do not position tableware parts directly in front of the intake opening or the blow opening of the Zeolith container.
Do not position heat-sensitive tableware parts directly in front of the blow opening of the Zeolith container.
AquaSensor
The AquaSensor is an optical measuring device (light barrier) which measures the turbidity of the rinsing water. You can save water with the
AquaSensor.
Use of the AquaSensor depends on the programme. If the soiling level is high, the rinsing water is drained off and replaced with fresh water. If the soiling level is lower, the rinsing water is used in the next wash cycle, so reducing water consumption by 3-6 litres. In the automatic programmes the temperature and run time are additionally adjusted to the level of soiling.
Installation and connection
To ensure proper operation, connect the appliance to the power and water supply correctly. Observe the specified criteria and the installation instructions.
Scope of supply
After unpacking all parts, check for any damage in transit and completeness of the delivery.
If you have any complaints, contact the dealer who sold you the appliance or our Customer Service.
Installation and connection
en
Note:
The appliance was tested at the factory to check it is in working order. It is possible that water has left marks on the appliance. These marks will disappear after the first wash cycle.
The delivery consists of the following:
¡
Dishwasher
¡
Operating instructions
¡
Installation Instructions
¡
Warranty
¡
Installation material
¡
Steam guard plate
¡
Mains cable
¡
Quick reference guide
Installing and connecting the appliance
You can position your built-under or integrable appliance in a fitted kitchen between wooden and plastic walls. If you subsequently install your dishwasher as a free-standing appliance, you must stop it from tipping over, e.g. by screwing it to the wall or installing it under a continuous worktop that is securely connected to adjacent cabinets.
1.
2.
3.
4.
5.
6.
7.
"Follow the safety instructions."
"Follow the instructions for electrical connection." → Page 14
Check the Scope of supply and the condition of the appliance.
Consult the installation instructions for the installation dimensions required.
Make the appliance level using the height-adjustable feet.
Make sure that the appliance is standing on the floor securely.
"Install the drainage connection."
"Install the drinking water connection." → Page 14
13
en
Installation and connection
8.
Connect the appliance to the power supply.
Drainage connection
Connect your appliance to drainage connection so dirty water is discharged via the wash cycle.
Installing the drainage connection
1.
2.
3.
4.
Consult the installation instructions supplied for the steps required here.
Connect the wastewater hose to the outlet connection of the siphon using the enclosed parts.
When doing so, check that the wastewater hose is not kinked, crushed or twisted.
Also check that there is no cover in the drainage system preventing the wastewater from being discharged.
Drinking water connection
Connect your appliance to a drinking water connection.
Installing the drinking water connection
Note:
If you are replacing the appliance, you must use a new water supply hose.
1.
2.
3.
Consult the installation instructions supplied for the steps required here.
Connect the appliance to the drinking water connection using the enclosed parts.
When doing so, check that the drinking water connection is not kinked, crushed or twisted.
Electrical connection
Connect your appliance to the power supply.
Connecting the appliance to the electricity supply
Notes
¡
Follow the "Safety instructions"
¡
Connect the appliance to alternating current only, in the range of
220 - 240 V and 50 Hz or 60 Hz.
¡
Please note that the water safety system is only functional if there is a power supply.
1.
2.
3.
Insert the non-heating appliance plug of the power cable into the appliance.
Insert the mains plug of the appliance into a nearby socket.
The connection data for the appliance can be found on the rating plate.
Check that the mains plug is inserted properly.
14
Familiarising yourself with your appliance
en
Familiarising yourself with your appliance
Familiarise yourself with the parts of your appliance.
Appliance
You can find an overview of the parts of your appliance here.
7
6
5
4
3
2
1
1 Rating plate
1
Depending on the appliance specifications
Rating plate with "E number and FD number"
The data you need for "Customer Service"
14
15
8
9
10
11
12
13
en
Familiarising yourself with your appliance
2
Detergent dispenser
Page 27 is added to the detergent
dispenser.
3
Bottom basket
4
5
6
Dispenser for special salt
Lower spray arm
Tablet collecting tray
Add the special salt to the dispenser for special salt.
"Water softening system", Page 24
The lower spray arm washes the tableware in the bottom basket.
If the tableware has not been washed properly, clean the spray arms.
"Cleaning spray arms", Page 40
During the wash cycle tablets automatically fall out of the detergent dispenser into the tablet collecting tray where they can fully dissolve.
7 Top basket
8
Cutlery shelf
1
9
Upper spray arm
10
Intake opening of the Zeolith container
11
Blow opening of the Zeolith container
12
Filter system
13
Cutlery basket
14 Dispenser for rinse aid
1
Depending on the appliance specifications
The upper spray arm washes the tableware in the top basket.
If the tableware has not been washed properly, clean the spray arms.
"Cleaning spray arms", Page 40
The intake opening is required for "Zeolith drying"
The blow opening is required for "Zeolith drying "
Add rinse aid to the dispenser for rinse aid.
Controls
The controls are used to configure all functions of your appliance and to obtain information about the operating status.
With some buttons you can perform different functions.
16
1 2
Familiarising yourself with your appliance
en
3 4 5 6 7 8
13 12 11 10 9
1
1
ON/OFF button and reset button
2 Programme buttons
3
Special salt refill indicator
4
Rinse aid refill indicator
5 WLAN display
6
7
Water supply display
button
Display for water supply
If you press for approx. 3 seconds, you can open the basic settings.
8 Start button
9
Programme buttons and additional functions
10 Remote Start
11
Timer programming
"Additional functions" → Page 20
"Setting timer programming" → Page 32
12
Display
13
Door opener
1
Depending on the appliance specifications
The display shows information about the remaining running time or the basic settings. You can change the basic settings via the display and the setting buttons.
Opening the appliance door
17
en
Programmes
Programmes
You can find an overview of the programmes that can be selected here.
Different programmes, which can be found on the control panel of your appliance, are available depending on the appliance configuration.
The running time may vary depending on the programme selected. The running time depends on the water temperature, the quantity of table-
ware, the level of soiling and the "Additional function" → Page 20 selec-
Programme
Intensive 70°
Auto 45-65°
Eco 50° ted. The running time will change if the rinse aid system is switched off or rinse aid needs to be added.
The consumption values can be found in the quick reference guide.
The consumption values relate to normal conditions and a water hardness of 16 - 20°°E. Different influencing factors such as water temperature or pipe pressure may result in deviations.
Use Programme sequence
Tableware:
¡
Washing pots and pans, non-fragile tableware and cutlery.
Level of soiling:
¡
Removing stubborn burned or dried-on food remnants containing starch and protein.
Tableware:
¡ Cleaning mixed tableware and cutlery.
Level of soiling:
¡ Removing common household food remnants lightly dried-on.
Tableware:
¡ Cleaning mixed tableware and cutlery.
Level of soiling:
¡
Removing common household food remnants lightly dried-on.
Intensive:
¡
Pre-Rinse
¡ Cleaning 70 °C
¡ Intermediate rinse
¡
Final rinse 50 °C
¡ Drying
Sensor-controlled:
¡ Optimised by sensors depending on the soiling of the rinsing water.
Most economical programme:
¡ Pre-Rinse
¡
Cleaning 50 °C
¡ Intermediate rinse
¡ Final rinse 35 °C
¡
Drying
Additional functions
All
All
All
18
Programmes
en
Programme Use
Information for test institutes
Test institutes are provided with information for comparability tests, e.g.
according to EN60436.
These are the conditions for conducting the tests, however they are not the results or consumption values.
E-mail enquiries to: [email protected]
The product number (E-Nr.) and the production number (FD) are required here. They can be found on the rating plate on the appliance door.
Programme sequence
Silence 50
Express 60°
Machine Care
-
Tableware:
¡ Cleaning mixed tableware and cutlery.
Level of soiling:
¡ Removing common household food remnants lightly dried-on.
Tableware:
¡ Cleaning mixed tableware and cutlery.
Level of soiling:
¡
Removing common household food remnants lightly dried-on.
Only when using unloaded appliance.
Reduced noise:
¡ Pre-Rinse
¡
Cleaning 50 °C
¡ Intermediate rinse
¡
Final rinse 35 °C
¡ Drying
Time-optimised:
¡ Cleaning 60 °C
¡ Intermediate rinse
¡
Final rinse 50 °C
¡ Drying
Machine Care 70 °C
-
Favourite
Note:
The relatively long running time in the Eco 50 ° programme is due to longer soaking and drying times. This results in optimal consumption values.
-
Additional functions
All
All
None
Favourite
You can save a combination of a programme and an additional function to the button.
You can save the program via the
Home Connect app or on the appliance.
The pre-rinse program is saved to this button at the factory. Pre-rinse is suitable for all types of tableware.
The tableware undergoes intermediate cleaning via cold rinsing.
Tip:
You can use the Home Connect app to download additional programmes and save them to the button.
1
Save Favourite on the appliance.
1.
2.
Press .
Press the right programme button.
1
Depending on the appliance specifications
19
en
Additional functions
3.
Press the button for the relevant additional function.
→ "Additional functions", Page 20
4.
Press for approx. 3 seconds.
a
The selected programme and the additional function will flash.
a
flashes.
a
The programme and the additional function are saved.
Tip:
To reset the programme, either use the Home Connect app or reset your appliance back to the factory settings.
→ "Overview of basic settings",
Additional function
Use
ExtraDry
¡ For a better drying result the final rinse temperature is increased and the drying phase extended.
¡ Especially suitable for drying plastic parts.
¡ There is a slight increase in energy consumption and the run time is extended.
Additional functions
You can find an overview of the additional functions that can be selected here. Different additional functions, which can be found on the control panel of your appliance, are available depending on the appliance configuration.
Additional function
Use
SpeedPerfect+
Half Load
¡ The run time is shortened by 15% to
75% depending on the rinse programme.
¡ Energy and water consumption are increased.
¡
Switch on with small loads.
¡ It is recommended adding less detergent to the detergent dispenser than for a full machine load.
¡ The run time is shortened.
¡
Energy and water consumption are reduced.
Features
You can find an overview of the possible features of your appliance and how to use them here.
These features depend on the model of your appliance.
20
Top basket
Arrange cups and glasses in the top basket.
a
Features
en
4.
The basket can then slip down slightly.
Raise or lower the basket evenly to the right level.
Knife shelf
1
You can adjust the height of the top basket to make room for larger items of tableware.
Adjusting top basket with side levers
To wash large items of tableware in the baskets, adjust the shelf position of the top basket.
1.
2.
3.
Pull out the top basket.
To prevent the basket from suddenly dropping down, hold the side of the basket by the top edge.
Press in the levers on the right and left on the outside of the basket.
5.
Check that the basket is level on both sides.
Slide the basket back in.
Bottom basket
Arrange pans and plates in the bottom basket.
a
Cutlery basket
1
Large plates up to a diameter of
31 cm can be arranged in the bottom basket as shown.
1
Depending on the appliance specifications
21
en
Features
Etagere
Use the cutlery shelf and space underneath for small cups and glasses or for large items of cutlery, e.g.
wooden spoons or serving cutlery.
Cutlery basket
Arrange cutlery in the cutlery basket, always without sorting it and with the sharp points downwards.
If you do not need the cutlery shelf, you can fold it up.
Folding prongs
Use the folding prongs to position tableware securely, e.g. plates.
You can fold the prongs down to position pans, bowls and glasses better.
1
Folding down prongs
1
If you do not need the prongs, fold them down.
1
Depending on the appliance specifications
22
1.
Push the lever forwards and fold down the prongs .
Before using for the first time
en
Knife shelf
Use the shelf for knives and long items of cutlery.
1
2
2.
To use the prongs again, fold them back up.
a
The prongs audibly click into position.
Basket heights
Set the baskets at the right height.
Appliance height 81.5 cm with cutlery basket
Setting
1 max. ø
2 max. ø
3 max. ø
Top basket
22 cm
24.5 cm
27 cm
Before using for the first time
Configure the settings for initial startup.
Performing the initial configuration
On initial start-up or after a reset to the factory settings, you will need to make settings.
Tip:
Connect your appliance to a mobile device. You can conveniently change all settings via the
Bottom basket
31 cm
27.5 cm
25 cm
Home Connect app.
Requirement:
"The appliance has been installed and connected."
1.
2.
3.
4.
5.
"Setting the water softening system." → Page 24
"Set the amount of rinse aid to be dispensed." → Page 27
23
en
Water softening system
Tip:
You can change these settings
Water softening system
Hard water leaves limescale on the tableware as well as the washing tank and parts of the appliance may become blocked.
To ensure good dishwashing results, you can treat the water with special salt and the water softening system.
To avoid damage to the appliance, water with a hardness above 9 °E must be softened.
Overview of water hardness settings
You can find an overview of the water hardness values that can be selected here.
You can find out how hard your water is from your local water company or by using a water hardness tester.
Water hardness °E
0 - 8
9 - 10
11 - 12
13 - 15
16 - 20
21 - 26
27 - 38
39 - 62
Hardness range
Soft
Soft
Medium
Medium
Medium
Hard
Hard
Hard
Note:
Set the water hardness determined on your appliance.
→ "Setting the water softening system", Page 24
With a water hardness of 0 - 8 °E you can dispense with special salt and switch off the water softening system.
→ "Switching off the water softening system", Page 25
mmol/l
0 - 1.1
1.2 - 1.4
1.5 - 1.8
1.9 - 2.1
2.2 - 2.9
3.0 - 3.7
3.8 - 5.4
5.5 - 8.9
Setting value
H00
H01
H02
H03
H04
H05
H06
H07
Setting the water softening system
Set the water hardness on your appliance.
1.
2.
3.
Determine the water hardness and the appropriate setting value.
→ "Overview of water hardness settings", Page 24
Press .
To open the basic settings, press
for 3 seconds.
a
The display shows Hxx.
a The display shows .
24
Water softening system
en
4.
5.
Press repeatedly until the right water hardness has been set.
The value H04 is set at the factory.
To save the settings, press
for 3 seconds.
Special salt
You can use special salt to soften water.
Adding special salt
If the special salt refill indicator lights up, add special salt to the dispenser for special salt just before the programme starts. The amount of special salt required depends on the water hardness: the higher the water hardness, the greater the amount of special salt required.
ATTENTION!
¡
Detergent may damage the water softening system.
▶
Only fill the dispenser of the water softening system with special dishwasher salt.
¡
Special salt can damage the tub due to corrosion.
▶
To make sure that any special salt that escapes is washed out of the tub, add the special salt to the dispenser for special salt immediately before the programme starts.
1.
2.
3.
Unscrew the lid of the dispenser for special salt and remove.
On initial start-up: Fill the dispenser right up with water.
Note:
Only use special salt for dishwashers.
Do not use salt tablets.
Do not use table salt.
Add the special salt to the dispenser.
1
Depending on the appliance specifications a
4.
Funnel
1
Fill the dispenser right up with special salt. The water in the dispenser is displaced and forced out.
Place the lid back on the dispenser and turn to close.
Switching off the water softening system
If you find the special salt refill indicator irritating, e.g. when using combined detergents with salt replacement substances, you can switch the salt refill indicator off.
Note
To avoid damage to the appliance, only switch off the water softening system in the following cases:
¡
The water hardness is max. 26 °E and you are using combined detergents with salt replacement substances. According to manufacturers, combined detergents with salt replacement substances can generally only be used up to a water hardness of 26 °E without adding special salt.
¡
The water hardness is 0 - 8 °E.
You do not need to use special salt.
1.
Press .
25
en
Rinse aid system
2.
To open the basic settings, press
for 3 seconds.
a
The display shows Hxx.
a
The display shows .
3.
Press repeatedly until the display shows H00.
4.
To save the settings, press
for 3 seconds.
a
The water softening system is switched off and the salt refill indicator is deactivated.
Regeneration of the water softening system
In order to obtain fault-free function of the water softening system, the appliance performs regeneration of the water softening system at regular intervals.
Regeneration of the water softening system takes place before the end of the main rinse cycle in all programmes. It will increase the run time and consumption values, e.g. water and electricity.
Overview of consumption values with regeneration the water softening system
Here you can find an overview of the maximum additional run time and consumption values during regeneration of the water softening system.
Regeneration of the water softening system after x rinse cycles
Additional run time in minutes
Additional water consumption in litres
Additional power consumption in kWh
6
7
5
0.05
The consumption values specified are laboratory measurements determined in accordance with the currently applicable standard and using the
26
Eco 50° programme and the factory value of the water hardness is set to
16 - 20°E.
Rinse aid system
You can use the rinse aid system and rinse aid to get tableware and glasses rinsed perfectly without marks.
Rinse aid
For optimum drying results, use rinse aid.
Only use rinse aid for domestic dishwashers.
Adding rinse aid
If the rinse aid refill indicator lights up, top up with rinse aid. Only use rinse aid for domestic dishwashers.
1.
Press the catch on the lid of the dispenser for rinse aid and lift
.
2
1
2.
Add rinse aid up to the max mark.
max
3.
If rinse aid spills out, remove it from the tub.
Spilled rinse aid can cause excessive frothing during the wash cycle.
4.
Close the lid of the dispenser for rinse aid.
a The lid clicks into position.
Setting the amount of rinse aid
If there are streaks or water marks on tableware, change the amount of rinse aid.
1.
2.
4.
Press .
To open the basic settings, press
for 3 seconds.
a
The display shows Hxx.
a
The display shows .
3.
Press repeatedly until the display shows the value set at the factory r05.
Press repeatedly until the right amount of rinse aid has been set.
5.
– A low setting adds less rinse aid during the wash cycle and reduces streaking on tableware.
– A higher setting adds more rinse aid during the wash cycle, reduces water marks and improves the drying result.
To save the settings, press
for 3 seconds.
Detergent
en
Switching the rinse aid system off
If you find the rinse aid refill indicator irritating, e.g. when using combined detergents with a rinse aid component, you can switch the rinse aid system off.
Tip:
The function of rinse aid is limited with combined detergents. You will generally get better results using rinse aid.
1.
2.
Press .
To open the basic settings, press
for 3 seconds.
a
The display shows Hxx.
a The display shows .
3.
4.
Press repeatedly until the display shows the value set at the factory r05.
Press repeatedly until the display shows r00.
5.
To save the settings, press
for 3 seconds.
a
The rinse aid system is switched off and the rinse aid refill indicator is deactivated.
Detergent
Find out which detergents are suitable for your appliance.
Suitable detergents
Only use detergents that are suitable for dishwashers. Both separate and combined detergents are suitable.
For optimum washing and drying results, use separate detergent, adding
and "Rinse aid" → Page 26 separately.
Modern, powerful detergents mainly use a low-alkaline formulation with enzymes. Enzymes break down starch and remove protein. Oxygen-
27
en
Detergent based bleaching agents are generally used to remove coloured marks, e.g.
tea or ketchup.
Note:
Follow the manufacturer's instructions for each detergent.
Detergent
Tabs
Description
Tabs are suitable for all cleaning functions and do not need to be measured out.
sometimes do not dissolve entirely and leave residues of detergent. This may impair the cleaning effect.
Powder detergent
Powder detergent is recommended for shorter
The dosage can be adjusted to the level of soiling.
Liquid detergent Liquid detergent works faster and is recommen-
ded for shorter "Programmes" → Page 18
without PreRinse.
Sometimes liquid detergent may leak out despite the detergent dispenser being closed. This is not a fault and is non-critical if you remember the following:
¡
Only choose a programme without PreRinse.
¡ Do not select timer programming for starting the programme.
The dosage can be adjusted to the level of soiling.
Tip:
Suitable detergents are available
online via our website or from "Customer Service" → Page 55 .
Separate detergents
Separate detergents are products that do not contain components other than detergent, e.g. powder detergent or liquid detergent.
With powder and liquid detergent the dosage can be individually adjusted to the level of soiling of the tableware.
For better washing and drying results and to avoid damage to the appli-
ance, please additionally use "Special salt" → Page 25
Combined detergent
Besides conventional separate detergents, a number of products are available with additional functions.
These products contain not only detergent but also rinse aid and salt replacement substances (3in1) and, depending on the combination (4in1,
5in1, ...), additional components such as glass protection or stainless steel cleaner.
According to manufacturers, combined detergents generally only function up to a water hardness of 26
°E. With a water hardness above 26
°E you will need to add special salt and rinse aid. For the best washing and drying results we recommend using special salt and rinse aid from a water hardness of 17 °E. If you are using combined detergent, the washing programme is adjusted automatically to ensure the best possible washing and drying result.
28
Unsuitable detergents
Do not use detergent which could cause damage to the appliance or present a risk to health.
Detergent
Hand washing-up liquid
Detergent containing chlorine
Description
Hand washing-up liquid can cause increased frothing and damage the appliance.
Chlorine residue on tableware may present a risk to health.
Information on detergents
Follow the instructions on detergents in everyday use.
¡
Detergents marked as "organic" or
"ecological" (environmentally friendly) generally contain lower levels of active agents or completely dispense with certain substances. The cleaning effect may be restricted here.
¡
Set the rinse aid and the water softening system to the separate detergent or combined detergent in use.
¡
According to manufacturers, combined detergents with salt replacement substances can only be used up to a certain water hardness, usually 26 °E, without adding special salt. For the best washing and drying results we recommend using special salt from a water hardness of 17 °E.
¡
To prevent sticking, only touch detergents in a water-soluble pouch with dry hands and only ever place them in a dry detergent dispenser.
¡
Even if the rinse aid and special salt refill indicators light up, washing programmes will run properly with combined detergents.
Detergent
en
¡
The function of rinse aid is limited with combined detergents. You will generally get better results using rinse aid.
¡
Use tablets with a special drying performance.
Adding detergent
1.
2.
To open the detergent dispenser, press the locking latch.
Add the detergent to the dry detergent dispenser.
50 ml
25 ml
15 ml
3.
If you are using tablets, one is enough. Insert the tablets in a horizontal position.
If you are using powder or liquid detergent, follow the manufacturer's instructions and quantities for dosage in the detergent dispenser.
20 ml – 25 ml detergent is sufficient for normal soiling. If tableware is only lightly soiled, slightly less than the amount of detergent specified is usually sufficient.
Close the lid of the detergent dispenser.
29
en
Tableware a The lid clicks into position.
a
The detergent dispenser will open automatically at the optimum time during the programme. Powder or liquid detergent will spread around the washing tank and dissolve there. Tablets will fall into the tablet collecting tray and dissolve in the right dosage. In order to ensure that tablets can dissolve evenly, do not place any other objects in the tablet collecting tray.
Tip:
If you use powder detergent and select a program with pre-rinse, you can also add a little detergent to the interior door of the appliance.
Tableware
Only clean tableware that is suitable for dishwashers.
Note:
Decorated glassware and parts made of aluminium or silver may fade or discolour with dishwashing.
Delicate types of glass may turn cloudy after a few washing cycles.
Damage to glass and tableware
Avoid damage to glass and tableware.
Cause
The following tableware is not dishwasher-safe:
¡
Items of cutlery and tableware made from wood
¡ Decorated glassware, antique and hand-crafted tableware
¡ Plastic parts not resistant to heat
¡ Tableware made from copper or tin
¡ Tableware soiled with ash, wax, lubricating grease or paint
¡ Very small items of tableware
Glass and tableware was not dishwashersafe.
Recommendation
Only put tableware in the dishwasher if it is marked as dishwasher-safe by the manufacturer.
The chemical composition of the detergent causes damage.
Highly caustic alkaline or highly acidic cleaning agents, in particular commercial or industrial cleaning agents, are not suitable for dishwashers in conjunction with aluminium.
Only put glasses and china in the dishwasher if it is marked as dishwasher-safe by the manufacturer.
Use a detergent marked as gentle on tableware by the manufacturer.
If you are using highly caustic alkaline or highly acidic cleaning agents, in particular commercial or industrial cleaning agents, do not put aluminium parts in the dishwasher interior.
30
Cause
The water temperature of the programme is too high.
Recommendation
Select a programme with lower temperatures.
After the programme has ended, take glassware and cutlery out of the appliance without delay.
Arrange tableware
Arrange the tableware correctly to optimise the dishwashing result and prevent damage to both the appliance and tableware.
Tips
¡
Using the appliance allows you to save energy and water compared to washing-up by hand.
¡
See our website for examples of how to load your appliance efficiently, free of charge.
¡
To save energy and water, load the machine with the number of place settings specified.
¡
For better washing and drying results, position items with curves or recesses at an angle so the water can run off.
Tableware
en
2.
To save resources, do not prerinse tableware under running water.
Observe the following when arranging tableware:
– Put heavily soiled tableware in the bottom basket, e.g. pans.
The more powerful the spray jet, the better the dishwashing result will be.
– To prevent damage to tableware, arrange it so it is stable and cannot tip over.
– To prevent injury, arrange cutlery with the points and sharp edges downwards.
– Position containers with the openings facing down so no water can collect in them.
– Do not block the spray arms make sure that they can turn freely.
– Do not place small parts in the tablet collecting tray and do not block it with tableware so as not to obstruct the lid of the detergent dispenser.
1.
Remove large remnants of food from your tableware.
31
en
Basic operation
Removing tableware
WARNING
Risk of injury!
Hot tableware can cause burns to the skin. When hot, tableware is sensitive to shock, may crack and can result in injury.
▶
When the programme has ended, do not empty the appliance until the tableware has cooled down for a while.
1.
2.
To prevent water dripping on the tableware, unload it starting at the bottom and working up.
Check the washing tank and accessories for soiling and clean if necessary.
Basic operation
You can find out everything you need to know about operating your appliance here.
Switching on the appliance
▶
Press .
The Eco 50° programme is set by default.
The Eco 50° programme is an especially environmentally friendly programme and ideal for normally soiled tableware. It is the most efficient programme for the combination of energy/water consumption for this type of tableware and evidences conformity with the EU Ecodesign Directive.
If you do not perform any actions on the appliance for 10 minutes, the appliance will automatically switch off.
Setting a programme
To adjust the wash cycle to the soiling level of the tableware, select a suitable programme.
▶
Press the right programme button.
a The programme is set and the programme button flashes.
a
The remaining running time of the programme appears on the display.
Setting additional functions
You can set additional functions to complete the washing programme selected.
Note:
The additional functions which can be used depend on the programme selected.
▶
Press the button for the relevant additional function.
→ "Additional functions", Page 20
a
The additional function is set and the additional function button flashes.
Setting timer programming
You can delay the start of the programme by up to 24 hours.
1.
Press .
a
"h:01" appears in the display.
2.
Use to set the required start time for the programme.
3.
Press .
a
This activates timer programming.
Tip:
To deactivate timer programming, press repeatedly until "h:00" appears in the display.
32
Starting the programme
▶
Press .
a
The programme has ended when the display shows "0h:00m".
Notes
¡
If you want to add more tableware while the appliance is running, do not use the tablet collecting tray as a handle for the top basket. You might touch the partially dissolved tablet.
¡
You can only change a programme when running if you cancel it.
¡
The appliance switches off automatically 1 minute after the end of the programme to save energy. If you open the appliance door immediately after the programme has ended, the appliance will switch off after 4 seconds.
Activating button lock
The button lock prevents the appliance from being operated accidentally or incorrectly while running.
▶
Press for approx. 3 seconds.
a
The button lock is activated and will be automatically deactivated at the end of the programme.
a
When the appliance is operated,
flashes on the display.
a
The button lock remains activated with a power failure.
Deactivate button lock
▶
Press for approx. 3 seconds.
Interrupting programme
Note:
When you open the appliance door once the appliance has heated up, leave the door slightly ajar for a
Basic operation
en few minutes and then close it. This will help prevent excess pressure building up in the appliance and stop the appliance door bursting open.
1.
Press .
a
The programme is saved and the appliance switches off.
2.
Press to resume the programme.
Terminate programme
To end a programme early or to switch from a programme that has already started, you will need to cancel it first.
▶
Press
4 seconds.
for approx.
a
All displays light up.
a
As soon as the displays are off, the display shows "0h:01m" and the residual water is pumped out.
a The programme is cancelled and ends after approx. 1 minute.
Switching off appliance
1.
2.
Please note the information on
.
Press .
Tip:
If you press during the wash cycle, the programme currently running will be interrupted. When you switch the appliance back on, the programme continues automatically.
33
en
Basic settings
Basic settings
You can configure the appliance to meet your needs.
Overview of basic settings
The basic settings depend on the features of your appliance.
Basic setting
Water hardness
Rinse aid dispensing r05
1
Intensive drying
Hot water
Wi-Fi
Display text Selection
H04
1
H00 - H07 d00
1
A00
1
Cn0
1 r00 - r06 d00 - d01
A00 - A01
Cn0 - Cn1
Description
Set the water softening system to your water hardness.
"Setting the water softening system", Page 24
Level H00 switches the water softening system off.
Set the amount of rinse aid to be dispensed.
"Setting the amount of rinse aid",
Switch the rinse aid system off with level r00.
The temperature is increased during the final rinse, which improves the drying result. This may increase the run time slightly.
Note: Not suitable for delicate items of tableware.
Switch Extra Dry on "d01" or off
"d00".
Set cold water or hot water connection. Only set the appliance to hot water if this can be prepared with little energy and a suitable installation is available, e.g. solar heating system with circulation line. The water temperature should be at least
40 °C and max. 60 °C.
Switch hot water on "A01" or off
"A00".
Switch the wireless network connection on or off.
Level "Cn0" switches the wireless network connection off.
1
Factory setting (may vary according to model)
34
Basic setting
Remote Start
Display text Selection rc1
1 rc0 - rc2
Home Connect
en
Description
Activate or deactivate
.
The following settings are possible:
¡ With the setting "rc0", the function is permanently deactivated.
¡ With the setting "rc1", the function can be selected via the button.
¡ With the setting "rc2", the function is permanently activated.
Restore changed settings to the factory settings.
The settings for initial start-up must be configured.
Factory setting rE Start with
YES
Confirm with
1
Factory setting (may vary according to model)
Changing basic settings
1.
2.
Press .
To open the basic settings, press
for 3 seconds.
a
The display shows Hxx.
a The display shows .
3.
4.
Press repeatedly until the display shows the required setting.
Press repeatedly until the display shows the right value.
5.
You can change several settings.
To save the settings, press
for 3 seconds.
Home Connect
This appliance is network-capable.
Connect your appliance to a mobile device to control its functions via the
Home Connect app.
The Home Connect services are not available in every country. The availability of the Home Connect function depends on the availability of
Home Connect services in your country. You can find information about this at: www.home-connect.com.
To be able to use Home Connect, you must first set up the connection to the WLAN home network (Wi-Fi
1
) and to the Home Connect app.
¡
→ "Connecting the appliance to
The Home Connect app guides you through the entire login process. Follow the instructions in the Home Connect app to configure the settings.
1
Wi-Fi is a registered trademark of the Wi-Fi Alliance.
35
en
Home Connect
Tips
¡
Please consult the documents supplied by Home Connect.
¡
Please also follow the instructions in the Home Connect app.
Note:
Please note the safety precautions in this instruction manual and make sure that they are also observed when operating the appliance via the Home Connect app.
Home Connect quick start
Connect your appliance to a mobile device quickly and easily.
Installing app
1.
Install the Home Connect app on your mobile device.
2.
Start the app and set up access for Home Connect.
The Home Connect app guides you through the entire login process.
Connecting the appliance to WLAN home network (Wi-Fi)
Requirements
¡
Home Connect app is installed on your mobile device.
¡
Wi-Fi on the router is activated.
¡
The basic setting Wi-Fi is activated on the appliance.
¡
The appliance receives signals from the WLAN home network (Wi-
Fi) at its installation location.
1.
With the help of the Home Connect
App scan the QR code.
2.
Follow the instructions in the
Home Connect app.
Home Connect settings
Adapt Home Connect to your needs.
You can find the Home Connect settings in the basic settings for your appliance. Which settings the display shows will depend on whether
Home Connect has been set up and whether the appliance is connected to your home network.
Remote Start
You can use the Home Connect app to start the appliance with your mobile device.
Tip:
If you select "rc2" in the "Basic settings" → Page 35 of this function,
the function is permanently activated and you can start your appliance with a mobile device at any time.
Activating Remote Start
When you have selected "rc1" in the basic settings of this function, activate the function on your appliance.
Requirements
¡
The appliance is connected to your
WLAN home network.
¡
The appliance is connected to the
Home Connect app.
¡
"rc1" is selected in the "Basic settings " → Page 35 of this function.
¡
A programme is selected.
▶
Press .
36
If you open the appliance door, the function is automatically deactivated.
a button lights up.
Tip:
To deactivate the function, press
.
Remote Diagnostics
Customer Service can use Remote
Diagnostics to access your appliance if you contact them, have your appliance connected to the Home Connect server and if Remote Diagnostics is available in the country in which you are using the appliance.
Tip:
For further information and details about the availability of Remote
Diagnostics in your country, please visit the service/support section of your local website: www.home-connect.com
Software update
You can use this function to update the software of your appliance, e.g.
for optimisation, troubleshooting or safety-relevant updating.
The Home Connect app informs you about available software updates.
Data protection
Please see the information on data protection.
The first time your appliance is registered on a home network connected to the Internet, your
Home Connect
en appliance will transmit the following types of data to the Home Connect server (initial registration):
¡
Unique appliance identification
(consisting of appliance codes as well as the MAC address of the
Wi-Fi communication module installed).
¡
Security certificate of the Wi-Fi communication module (to ensure a secure data connection).
¡
The current software and hardware version of your appliance.
¡
Status of any previous reset to factory settings.
This initial registration prepares the
Home Connect functions for use and is only required when you want to use the Home Connect functions for the first time.
Note:
Please note that the
Home Connect functions can only be utilised with the Home Connect app.
Information on data protection can be retrieved in the Home Connect app.
Declaration of Conformity
Robert Bosch Hausgeräte GmbH hereby declares that the appliance with Home Connect functionality meets the essential requirements and other relevant provisions of the Directive 2014/53/EU.
A detailed RED Declaration of Conformity can be found online at www.bosch-home.com among the additional documents on the product page for your appliance.
BE
ES
BG
FR
CZ
HR
DK
IT
2.4 GHz band: 100 mW max.
5 GHz band: 100 mW max.
DE
CY
EE
LV
IE
LT
EL
LU
37
en
Cleaning and servicing
HU
SK
MT
FI
NL
SE
5 GHz WLAN (Wi-Fi): For indoor use only.
AT
UK
PL
NO
PT
CH
RO
TR
SI
Cleaning and servicing
To keep your appliance working efficiently for a long time, it is important to clean and maintain it carefully.
Cleaning the tub
WARNING
Risk of harm to health!
Using detergents containing chlorine may result in harm to health.
▶
Never use detergents containing chlorine.
1.
2.
3.
4.
Remove any coarse soiling in the interior with a damp cloth.
Add detergent to the detergent dispenser.
Select the programme with the highest temperature.
"Start the programme without tableware." → Page 33
Cleaning products
Only use suitable cleaning products to clean your appliance.
Tips on appliance care
Follow the tips on appliance care to make sure your appliance functions properly at all times.
Action
Wipe the door seals, the front of the dishwasher and the control panel regularly using a damp cloth and washing-up liquid.
If the appliance is not going to be used for a while, leave the door slightly ajar.
Benefit
This ensures the parts of the appliance will remain clean and hygienic.
This will prevent unpleasant odours.
Machine Care
Deposits, e.g. from remnants of food and limescale, can cause your appliance to malfunction. To avoid such faults and reduce odours, we recommend cleaning your appliance at regular intervals.
Machine Care combined with machine care products and machine cleaners is the right programme for the care of your appliance.
Phase Removal of
1 Grease and limescale
Tip:
You can get our tested and approved Dishwasher Care and Machine Cleaner for Dishwashers online at https://www.bosch-home.com/ store or from customer service.
Machine Care is a programme which removes various deposits in one washing cycle. Cleaning takes place in two phases:
Detergent
Liquid machine care product or machine descaler in powder form.
Placement
Appliance interior, e.g. bottle hung in the cutlery basket or powder in the interior.
38
Cleaning and servicing
en
Phase Removal of
2
Detergent
Food remnants and deposits Machine cleaner
To ensure optimum cleaning performance, the programme doses the detergents independently of each another during the relevant cleaning phase. Correct placement of the detergents is necessary here.
Run Machine Care without tableware if the indicator for Machine Care lights up on the control panel or if advised to do so by the display. The indicator will go out after you have run
Machine Care. If your appliance does not have a reminder function, we recommend performing Machine Care every 2 months.
Running Machine Care
Run the Machine Care programme if the indicator for Machine Care lights up on the control panel or if advised to do so by the display.
Notes
¡
Run the Machine Care programme without any tableware in the dishwasher.
¡
Only use machine care products and machine cleaners specially designed for dishwashers.
¡
Make sure that there are no aluminium parts, e.g. extractor hood grease filters or aluminium pans, in the interior of the appliance.
¡
If you have not run Machine Care after 3 washing cycles, the indicator for Machine Care will go out automatically.
¡
For optimum cleaning performance, ensure the correct placement of cleaners.
¡
Follow the safety instructions given on the packagings of the machine care products and machine cleaners.
1.
2.
3.
Remove any coarse soiling in the interior with a damp cloth.
Clean the filters.
Place the machine care product in the appliance interior.
4.
Only use machine care products specially designed for dishwashers.
Pour the machine cleaner into the detergent dispenser until it is filled completely.
Do not place any additional machine cleaner in the appliance interior.
5.
Press .
6.
Press .
a Machine Care is run.
a
Once the programme has ended, the indicator for Machine Care goes out.
Filter system
The filter system removes coarse soiling from the dishwashing cycle.
1
2
3
3
2
1
Placement
Detergent dispenser
Micro filter
Fine filter
Coarse filter
39
en
Cleaning and servicing
Cleaning filters
Soiling in the dishwashing water may block the filters.
1.
2.
After each wash check the filters for residue.
Turn the coarse filter anticlockwise
and remove the filter system .
‒
Check that no foreign objects fall into the sump.
2
1
3.
Pull down the micro filter to remove.
1
2
5.
6.
7.
Clean the filter elements under running water.
Carefully clean the rim of dirt between the coarse and the fine filter.
Re-assemble the filter system.
Make sure that the locking catches on the coarse filter click into position.
Insert the filter system into the appliance and turn the coarse filter clockwise.
Make sure that the arrow markings match up.
Cleaning spray arms
Limescale and soiling in the dishwashing water may block the nozzles and bearings on the spray arms.
Clean the spray arms regularly.
1.
Unscrew the upper spray arm and pull down to remove .
4.
Press the locking catches together and lift the coarse filter out
.
1
2
40
2.
Pull up the lower spray arm to remove.
Cleaning and servicing
en
3.
Check the outlet nozzles on the spray arms for blockages under running water and remove any foreign bodies.
4.
Insert the lower spray arm.
a
The spray arm clicks into position.
5.
Insert the upper spray arm and screw it firmly in place.
41
en
Troubleshooting
Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshooting information before contacting after-sales service. This will avoid unnecessary costs.
▶
WARNING
Risk of electric shock!
Incorrect repairs are dangerous.
Repairs to the appliance should only be carried out by trained specialist
▶ staff.
Only use genuine spare parts when repairing the appliance.
▶
If the power cord of this appliance is damaged, it must be replaced with a special connection cable, which is available from the manufacturer or his
Customer Service.
Error code / Fault display / Signal
Fault
E:21-30 will light up alternately.
E:21-60 will light up alternately.
E:30-00 will light up alternately.
E:31-00 will light up alternately.
E:34-00 will light up alternately.
E:32-00 will light up alternately or indicator for water supply lights up.
Cause
Intake opening of Zeolith container is covered by items of tableware.
Appliance has detected calcified heating element.
Water protection system is activated.
Water protection system is activated.
Water is continuously running into the appliance.
Supply hose is kinked.
Water tap is turned off.
Water tap is jammed or furred up.
1.
2.
1.
2.
1.
2.
1.
2.
troubleshooting
▶
Re-arrange the tableware in the ap-
pliance so the "Intake opening of the Zeolith container "
is no longer obstructed.
Descale the appliance.
Operate the appliance with the Water softening system.
Turn off the water tap.
Turn off the water tap.
▶
▶
▶
Turn off the water tap.
Install the supply hose without kinks.
Turn on the water tap.
Turn on the water tap.
The flow rate must be at least 10 l/ min when the water supply is open.
42
Fault
E:32-00 will light up alternately or indicator for water supply lights up.
Troubleshooting
en
Cause
The filters in the water connection of the supply or
AquaStop hose are blocked.
3.
4.
1.
2.
5.
troubleshooting
Switch off the appliance.
Pull out the mains plug.
Turn off the water tap.
Unscrew the water connection.
Remove the filter from the supply hose
E:92-40 will light up alternately.
E:61-03 will light up alternately. Water is not drained.
E:61-02 will light up alternately.
6.
7.
8.
9.
10.
11.
Clean the filter.
Re-insert the filter in the supply hose.
Screw the water connection back on.
Check the water connection for leaks.
Restore the power supply.
Switch the appliance on.
Filters are soiled or blocked.
▶
Clean the filters.
Wastewater hose is blocked or kinked.
1.
2.
Reposition the wastewater hose without kinks.
Remove residues.
Siphon connection is still sealed.
Cover of the wastewater pump is loose.
Wastewater pump is blocked.
Cover of the wastewater pump is loose
▶
▶
▶
▶
Check the connection to the siphon and open if necessary.
Secure the cover of the "Wastewater pump "
into position.
Clean the wastewater pump.
Secure the cover of the "Wastewater pump "
into position.
43
en
Troubleshooting
Fault
E:90-01 will light up alternately.
A different error code appears in the display window.
E:01-00 to E:90-10
Cause
Mains voltage is too low.
1.
2.
troubleshooting
This is not a fault on the appliance.
Contact an electrician.
Have the mains voltage and electrical installation checked by an electrician.
A technical fault is present.
1.
Press .
2.
3.
Unplug the appliance or switch off the fuse.
Wait at least 2 minutes.
4.
5.
6.
Insert the mains plug of the appliance in a socket or switch on the fuse.
Switch the appliance on.
If the problem occurs again:
‒
‒
‒
‒
Press .
Turn off the water tap.
Pull out the mains plug.
ror code.
Washing results
Fault
Tableware is not dry.
Cause
No rinse aid used or dosage set too low.
Programme or programme option has no drying phase, or the drying phase is too brief.
Water collects in recesses of the tableware or cutlery.
▶
1.
2.
troubleshooting
Set the amount of rinse aid to be dispensed.
"Setting the amount of rinse aid",
▶
"Select a programme with drying, e.g. intensive, strong or ECO programme." → Page 18
Some option buttons decrease the drying result, e.g varioSpeed.
Position tableware at an angle where possible.
44
Fault
Tableware is not dry.
Cause
Troubleshooting
en troubleshooting
Appliance interior still wet after wash cycle.
The combined detergent used has a poor drying performance.
Extra Dry not activated to improve drying performance.
Tableware removed too early or drying process not yet ended.
Rinse aid used has a limited drying performance.
1.
2.
1.
2.
▶
Use rinse aid to improve drying performance.
Use a different combined detergent with a better drying performance.
Activate Extra Dry.
▶
▶
Wait until the programme ends.
Only remove tableware 30 minutes after the programme has ended.
Use a name-brand rinse aid.
Eco products may have limited effectiveness.
No remedial action possible.
Plastic tableware is not dry.
Not a fault. As plastic does not store heat so well, it also does not dry as well.
Cutlery is not dry.
Cutlery not arranged properly in the cutlery basket or cutlery drawer.
Droplets can form on the cutlery contact points.
1.
2.
"Arrange cutlery individually where possible."
Avoid points of contact.
No action required.
Not a fault. The condensation drying principle causes water droplets in the tub – they are indeed desirable here. The moisture in the air condenses on the inside walls, runs off and is pumped out.
45
en
Troubleshooting
Fault
Remnants of food on tableware.
Detergent residue in the appliance
Cause
Tableware is placed too close together or basket is overfilled.
Spray arm rotation is blocked.
Spray arm nozzles are blocked.
Filters are soiled.
troubleshooting
1.
2.
Arrange tableware with sufficient space in between.
The spray jets must reach the surfaces of the tableware.
Avoid points of contact.
▶
▶
Arrange tableware so that it does not obstruct spray arm rotation.
Filters are inserted incorrectly and/or not engaged.
Washing programme selected too weak.
▶
Clean the filters.
1.
2.
Insert the filters properly.
Engage the filters.
▶
▶
Select a more intensive washing programme.
Only remove large remnants of food and do not prerinse tableware.
Tableware has been precleaned too intensely. The sensors chose a weaker programme. Stubborn soiling cannot be entirely removed.
Tall narrow receptacles in corner areas are not rinsed adequately.
Top baskets on right and left are not set to same height.
Lid of the detergent dispenser is blocked by items of tableware parts and will not open.
The lid of the detergent dispenser is blocked by the tab and will not open.
▶
▶
1.
2.
▶
Do not position tall narrow receptacles at too great an angle or in corner areas.
Set the top baskets on the left and right to the same level.
Arrange tableware in the top basket tableware so the tab collecting tray is not obstructed by tableware.
→ "Arrange tableware", Page 31
Items of tableware are blocking the dispenser lid.
Do not place tableware or fragrance dispensers in the tablet collecting tray.
Position the tab in the detergent dispenser crosswise, not vertically.
46
Troubleshooting
en
Fault
Detergent residue in the appliance
Water marks on plastic parts.
Wipeable or water-soluble coatings are present inside the appliance or on the door.
Stubborn white coatings are present on tableware, inside the appliance or the door.
Cause
Tabs are used in the quick or short programme. Dissolving time of the tab is not attained.
Washing effect and dissolving performance are reduced after a prolonged storage time or detergent is very lumpy.
Due to laws of physics droplet formation on plastic surfaces is unavoidable.
After drying water marks are visible.
troubleshooting
▶
Select a more intensive "Programme"
or use
.
▶
▶
▶
Select a more intensive programme.
Position tableware at an angle.
▶
Use rinse aid.
Detergent substances are deposited there. These coatings cannot generally be removed with chemicals.
White coating is deposited in the appliance interior.
▶
▶
▶
1.
2.
Set the water softening system higher.
Clean the appliance mechanically.
Set the water softening system correctly.
In most cases you will need to increase the setting.
Change your detergent if required.
Special salt dispenser is not screwed tight.
Detergent substances are deposited there. These coatings cannot generally be removed with chemicals.
The hardness range is set incorrectly or the water hardness is greater than 62 °E
(8,9 mmol/l).
3in1/organic/eco detergent is not effective enough.
▶
▶
Screw the special salt dispenser tight.
▶
Clean the appliance mechanically.
▶
▶
Set the Water softening system to the water hardness or add special salt.
Set the Water softening system to the water hardness and use separate detergents (proprietary detergent, special salt, rinse aid).
47
en
Troubleshooting
Fault
Stubborn white coatings are present on tableware, inside the appliance or the door.
Tea residue or lipstick marks on tableware.
Coloured coatings (blue, yellow, brown) that are difficult or impossible to remove are present inside the appliance or on stainless steel tableware.
Cause
Too little detergent is being used.
Washing programme selected too weak.
Washing temperature is too low.
Too little detergent is being used or is unsuitable.
troubleshooting
▶
Increase the amount of detergent
▶
Select a more intensive washing programme.
▶
Select a programme with a higher washing temperature.
▶
▶
Page 27 and follow the manufac-
turer's instructions for the amount to be used.
Only remove large remnants of food and do not prerinse tableware.
Tableware has been precleaned too intensely. The sensors chose a weaker programme. Stubborn soiling cannot be entirely removed.
The formation of films is due to substances contained in vegetables (cabbage, celery, potatoes, noodles, etc.) or tap water (manganese).
The formation of films is due to metal components on silver or aluminium tableware.
▶
▶
Clean the appliance.
You can remove deposits with
or a machine cleaning product. It may not always be possible to completely remove deposits but they are harmless to health.
Clean the appliance.
You can remove deposits with
"Mechanical cleaning" → Page 38
or a machine cleaning product. It may not always be possible to completely remove deposits but they are harmless to health.
48
Troubleshooting
en
Fault
Coloured deposits (yellow, orange, brown) that are easy to remove are present inside the appliance (mainly at the bottom).
Plastic parts inside the appliance are discoloured.
Plastic parts are discoloured.
Removable streaks are present on glasses, glassware with a metallic appearance and cutlery.
Cause
The formation of films is due to ingredients of food remnants and tap water (limescale) "soaplike".
Plastic parts inside the appliance may become discoloured during the life of the dishwasher.
Washing temperature is too low.
Tableware has been precleaned too intensely. The sensors chose a weaker programme. Stubborn soiling cannot be entirely removed.
Amount of rinse aid to be dispensed is set too high.
No rinse aid has been added.
Detergent residue is present in the final rinse. Lid of the detergent dispenser is blocked by tableware items and will not open fully.
Tableware has been precleaned too intensely. The sensors chose a weaker programme. Stubborn soiling cannot be entirely removed.
troubleshooting
1.
2.
3.
Check the setting of the water softening system.
Add special salt.
→ "Adding special salt", Page 25
If you are using combined detergents (tabs), activate the water softening system.
Follow the information about detergents.
▶
Discolouration can come about and will not impair functioning of the appliance.
▶
▶
▶
▶
Set the rinse aid system to a lower setting.
1.
2.
Select a programme with a higher washing temperature.
Only remove large remnants of food and do not prerinse tableware.
Arrange tableware in the top basket tableware so the tab collecting tray is not obstructed by tableware.
Items of tableware are blocking the dispenser lid.
Do not place tableware or fragrance dispensers in the tablet collecting tray.
▶
Only remove large remnants of food and do not prerinse tableware.
49
en
Troubleshooting
Fault
Irreversible clouding of glassware.
Rust spots on cutlery.
Detergent residue is present in the detergent dispenser or the tablet collecting tray.
Excessive formation of foam occurs.
Cause
Glasses are not dishwasherproof, only suitable for dishwashers.
troubleshooting
▶
Use dishwasher-proof glasses.
Glasses are usually only suitable for use in a dishwasher, i.e. long-term wear or long-term changes must be expected.
▶
Avoid a lengthy steam phase
(standing time after wash cycle ends).
▶
Use a programme with a lower temperature.
▶
Set the softening system to the water hardness.
▶
Use detergent with a glass protection component.
Use rust-resistant tableware.
Cutlery is not sufficiently rust-resistant. Knife blades are often more severely affected.
Cutlery may also rust if washed together with rusting items.
Salt content in washing water is too high.
▶
▶
Do not wash rusting items.
Spray arms were blocked by tableware so detergent was not rinsed out.
Detergent dispenser was damp when detergent was added.
Hand washing-up liquid is present in dispenser for rinse aid.
1.
2.
▶
▶
▶
Remove any spilled special salt from the tub.
Screw the cap of the special salt dispenser on tight.
Check that the spray arms are not blocked and can rotate freely.
Only add detergent to a detergent dispenser when dry.
Immediately add rinse aid to the dispenser.
Rinse aid has been spilled.
▶
Remove the rinse aid with a cloth.
Detergent or appliance care product used causes excessive foaming.
▶
Change the brand of detergent.
50
Troubleshooting
en
Home Connect problem
Fault
Connection to home network is not established.
WLAN display is flashing.
Home Connect cannot be implemented correctly.
Cause
WLAN on router is not active.
Connection to home network is not available.
Home Connect set incorrectly.
troubleshooting
▶
▶
▶
Check the wireless network connection of your router.
Activate the wireless network connection on your router.
Please consult the documents supplied for Home Connect.
Technical fault is present.
▶
Please consult the information about support in the documents supplied for Home Connect.
Information on display panel
Fault
Special salt refill indicator lights up.
Refill indicator for special salt does not light up.
Refill indicator for rinse aid lights up.
Refill indicator for rinse aid does not light up.
Display flashes.
Cause
Insufficient special salt.
Sensor does not detect special salt tablets.
Water softening system is switched off.
Insufficient rinse aid.
troubleshooting
▶
▶
▶
.
Do not use special salt tablets.
Setting the water softening system
Rinse aid system is switched off.
Appliance door is not closed properly.
1.
2.
Set the amount of rinse aid to be dispensed.
→ "Setting the amount of rinse aid",
▶
Set the amount of rinse aid to be dispensed.
▶
Close the appliance door.
‒
Arrange the tableware so that no parts project beyond the basket and prevent the appliance door from closing properly.
Malfunctions
Fault
Water is left in the appliance at the end of the programme.
Cause
Filter system or area under the filters is blocked.
1.
2.
troubleshooting
51
en
Troubleshooting
Fault
Water is left in the appliance at the end of the programme.
Appliance cannot be switched on or operated.
Appliance does not start.
Programme starts automatically.
Appliance stops during the programme or cuts out.
Cause
Programme has not yet ended.
troubleshooting
▶
Wait until the programme ends or cancel the programme with Reset .
Software update is taking place.
▶
▶
Wait until the software update has finished.
Appliance functions have failed.
1.
2.
3.
4.
Pull out the mains plug or switch off the fuse.
Wait at least 2 minutes.
Connect the appliance to the power supply.
Switch the appliance on.
The mains fuse has tripped.
▶
Check the relevant fuse.
Mains cable is not inserted.
1.
Check whether the socket works.
2.
Check whether the mains cable is properly inserted in the socket and on the rear of the appliance.
▶
Close the appliance door.
Appliance door is not closed properly.
You did not wait until programme ended.
▶
▶
Close the appliance door.
Appliance door is not closed properly.
Power and/or water supply has been interrupted.
1.
2.
Check the power supply.
Check the water supply.
Top basket is pressing against inner door and preventing appliance door from being closed securely.
▶
Check whether the rear panel of the appliance is being pressed in by a socket or hose holder that has not been removed.
▶
Arrange the tableware so that no parts project beyond the basket and prevent the appliance door from closing properly.
Mechanical damage
Fault
Appliance door cannot be closed.
Cause
Door lock has been activated.
troubleshooting
▶
Close the appliance door with greater force.
52
Troubleshooting
en
Fault
Appliance door cannot be closed.
Lid on the detergent dispenser cannot be closed.
Cause
Door cannot be closed due to installation method.
Detergent dispenser or lid are blocked by sticky detergent residue.
troubleshooting
▶
Check whether the appliance has been installed properly.
When closed, the appliance door, its decor or attached parts should not knock against adjacent cabinets or the worktop.
▶
Remove detergent residue.
Noise
Fault
Filling valves making knocking noises.
Cause
Caused by the domestic installation. No appliance fault present. Does not affect functioning of the appliance.
Knocking or rattling noise.
Spray arm is striking tableware.
With a small load the water jets directly strike against the tub.
Light items of tableware move about during the wash cycle.
troubleshooting
▶
Can only be remedied in the domestic installation.
▶
▶
▶
▶
Arrange tableware so that the spray arms do not strike tableware.
Distribute the tableware evenly.
Load the appliance with more tableware.
Position light items of tableware securely.
53
en
Transportation, storage and disposal
Clean wastewater pump
Large remnants of food or foreign bodies can block the waste water pump. As soon as the rinsing water no longer drains properly, the waste water pump must be cleaned.
WARNING
Risk of injury!
Sharp and pointed objects or fragments of glass may block the waste water pump and cause injury.
▶
Remove any foreign bodies carefully.
1.
2.
3.
4.
5.
Disconnect the appliance from the power supply.
Remove the top and bottom basket.
Remove the filter system.
Scoop out any water.
Use a sponge if necessary.
Prise off the pump cover using a spoon and grip it by the crosspiece.
6.
7.
8.
Lift the pump cover inwards at an angle and remove.
Remove any remnants of food and foreign bodies in the area of the impeller.
Insert the pump cover and press down .
1
2 a The pump cover clicks into position.
9.
Install the filter system.
10.
Insert the top and bottom basket.
Transportation, storage and disposal
You can find out here how to prepare your appliance for transportation and storage. You will also find out how to dispose of old appliances.
Removing the appliance
2.
3.
4.
1.
5.
6.
7.
Disconnect the appliance from the power supply.
Turn off the water tap.
Detach the drainage connection.
Detach the drinking water connection.
Loosen any screws fastening the appliance to cabinet parts.
Remove the base panel if fitted.
Pull the appliance out carefully, along with the hose behind it.
54
Protect appliance from frost
If there is a risk of frost where the appliance will be standing, e.g. in a holiday home, empty the appliance completely.
▶
Transporting the appliance
To avoid damage to the appliance, empty it before transporting.
Note:
Always transport the dishwasher upright to prevent residual water getting into the machine's controls and damaging the appliance.
2.
3.
4.
1.
5.
6.
7.
8.
9.
Remove tableware from the appliance.
Secure loose parts.
"Switch on appliance." → Page 32
Select the programme with the highest temperature.
"Start the programme." → Page 33
To drain the appliance, terminate the programme after approx.
4 minutes.
Turn off the water tap.
To empty the residual water out of the appliance, detach the supply hose and let the water drain out.
Customer Service
en
Disposing of old appliance
Valuable raw materials can be reused by recycling.
WARNING
Risk of harm to health!
Children can lock themselves in the appliance, thereby putting their lives at risk.
▶
With redundant appliances, unplug the power cord. Then cut through the cord and damage the lock on the appliance door beyond repair so that the appliance door will no longer close.
1.
2.
3.
Unplug the appliance from the mains.
Cut through the power cord.
Dispose of the appliance in an environmentally friendly manner.
This appliance is labelled in accordance with European Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment - WEEE).
The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU.
Customer Service
If you have any queries, are unable to rectify faults on the appliance yourself or if your appliance needs to be repaired, contact Customer Service.
You can solve many problems yourself by consulting the information on troubleshooting in these instructions or on our website. If this is not the case, contact our after-sales service.
55
en
Customer Service
We will always find an appropriate solution and try to avoid unnecessary visits being made by a Customer Service technician.
With any warranty claims, we will make sure that your appliance is repaired by trained after-sales technicians using genuine spare parts, including after the manufacturer's warranty has expired.
For safety reasons repairs to the appliance should only be carried out by trained specialist staff. The warranty claim becomes void if repairs or interventions have been carried out by persons not authorised by us for that purpose or if our appliances have been fitted with spare, supplementary or accessory parts that were not genuine parts and then resulted in a defect.
Function-relevant genuine spare parts according to the corresponding Ecodesign Order can be obtained from
Customer Service for a period of at least 10 years from the date on which your appliance was placed on the market within the European Economic Area.
Note:
Under the terms of the manufacturer's warranty the use of Customer Service is free of charge.
Detailed information on the warranty period and terms of warranty in your country is available from our aftersales service, your retailer or on our website.
If you contact Customer Service, you will require the product number (E-
Nr.), the production number (FD) and the consecutive numbering (Z-Nr.) of your appliance.
The contact details for Customer Service can be found in the enclosed
Customer Service directory or on our website.
Product number (E-Nr.), production number (FD) and consecutive numbering (Z-Nr.)
You can find the product number (E-
Nr.), the production number (FD) and the consecutive numbering (Z-Nr.) on the appliance's rating plate.
The rating plate is located inside the appliance door.
Make a note of your appliance's details and the Customer Service telephone number to find them again quickly.
AQUA-STOP guarantee
In addition to warranty claims against the seller under the purchase agreement and in addition to our manufacturer's warranty, we offer compensation under the following conditions.
¡
If our Aqua-Stop system is defective and causes water damage, we will make good the damage for private users. To ensure protection from water damage, the appliance must be connected to the power supply.
¡
The liability guarantee is valid for the service life of the appliance.
¡
A claim can only be made under the guarantee if the appliance has been correctly installed and connected with Aqua-Stop according to our instructions; this also includes correctly fitting the Aqua-
Stop extension (genuine accessory). Our guarantee does not cover defective supply lines or fittings up to the Aqua-Stop connection on the tap.
¡
If your appliance is fitted with
Aqua-Stop, you can in principle leave your appliance unattended during operation and the tap turned on afterwards. The tap only
56
needs to be turned off if you are away from home for a long period, e.g. on holiday for several weeks.
Technical specifications
Facts and figures for your appliance can be found here.
Weight
Voltage
Power rating
Fuse
Max.: 60 kg
220 - 240 V, 50 Hz or
60 Hz
2000 - 2400 W
10 - 16 A
Power consumption Off mode/standby mode: 0.50 W
Left-on mode: 0.50 W
Networked standby:
2.00 W
Time in left-on mode:
0 min
Time after which appliance is switched to networked standby mode: 10 min
Complies with the latest regulations (EU) for energy labels and ecodesign at the time of placing on the market.
Additional functions and settings may increase power consumption and times.
Water pressure
¡
Min. 0.05 MPa
(0.5 bar)
¡ Max. 1 MPa
(10 bar)
Inlet rate
Water temperature
Min. 10 l/min
Cold water.
Hot water max.: 60 °C
Technical specifications
en
Capacity 13 place settings
More information about your model can be found online at https://energylabel.bsh-group.com
1
. This web address is linked to the official EU
EPREL product database. At the time of printing its web address had not yet been published. Please then follow the instructions on searching for models. The model identifier is made up of the characters before the slash in the product number (E-Nr.) on the rating plate. Alternatively you can also find the model identifier in the first line of the EU energy label.
Information regarding Free and Open Source Software
This product includes software components that are licensed by the copyright holders as free software or open source software.
The applicable licence information is stored on your home appliance. You can also access the applicable licence information via your Home
Connect App: "Profile -> Legal information -> Licence Information". You can download the licence information on the brand product website (search for your appliance model on the product website and check additional documents). Alternatively, you can send a request to [email protected] or to BSH Hausgeräte GmbH GmbH, Carl-Wery-Str.
34, D-81739 München, Germany.
The source code will be made available to you on request.
To file a request, please email to [email protected] or send a written request to BSH Hausgeräte GmbH,
Carl-Wery-Str. 34, D-81739 München,
Germany.
1
Only applies to countries in the European Economic Area
57
en
Technical specifications
Reference "OSSREQUEST"
The cost of performing your request will be charged to you. This offer is valid three years from the date of purchase or at least as long as we offer support and spare parts for the respective appliance.
58
Thank you for buying a
Bosch Home Appliance!
Register your new device on MyBosch now and profit directly from:
• Expert tips & tricks for your appliance
• Warranty extension options
• Discounts for accessories & spare-parts
• Digital manual and all appliance data at hand
• Easy access to Bosch Home Appliances Service
Free and easy registration – also on mobile phones:
www.bosch-home.com/welcome
Looking for help?
You'll find it here.
Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts.
Find out everything about the many ways Bosch can support you:
www.bosch-home.com/service
Contact data of all countries are listed in the attached service directory.
Robert Bosch Hausgeräte GmbH
Carl-Wery-Straße 34
81739 München
GERMANY www.bosch-home.com
*9001509690*
9001509690
(000430)
650 V1 en
Advertisement