Timer program- ming function. Bosch WTA4409GB/05, WTA4409GB/03, WTA4409GB/04, WTA4409GB/02, WTA4408GB/01, WTA4409GB/01

Timer program- ming function

The programme can be set to start up to

19 hours later.

Set the timer as follows:

1. Select the programme you require using the

programme selector

. i the button.

0h flashes in the display.

The display flashes until you press

Start

or you turn the

programme selector

to Off.

3. Press repeatedly until the value you require is displayed. the button to save the time and to start counting down.

The time you have selected counts down.

The dot flashes in the display. The time counts down in increments of 1 hour.

The door may be opened at any time. This does not affect the delay selected. The display flashes. The programme continues when you close the door and press the

Start

button.

The delay may be cleared or changed at any time.

1. Turn to Off (cancels the timer programming).

2. Select the programme you require using the

programme selector

. the button and set a new time if necessary (see above).

18