Setting up the dryer. Bosch WTA4409GB/05, WTA4409GB/03, WTA4409GB/04, WTA4409GB/02, WTA4408GB/01, WTA4409GB/01

Setting up the dryer

26

!

Never place the appliance behind a lockable door, a sliding door or a door with the hinge on the opposing side to the appliance.

!

Position the appliance so that the door of the tumble dryer can be opened unimpeded.

!

That exhaust air must not be discharged into a flue which is used for exhausting fumes from appliances burning gas or other fuels.

The dryer must be positioned so it is level on the floor. Use a spirit level to ensure that this is the case. The height of the feet can be adjusted. If necessary, use these to line the dryer up, as described below:

Loosen the counter nuts.

Turn the feet so that they compensate for the height of the machine.

Retighten the counter nuts.

Do not trap the mains cable between the dryer and the wall.

Leave a minimum distance of 10 cm between the ventilation support and the wall.

!

Make sure that there is easy access at all

times to the earth contact socket.

!

The dryer cannot be assembled and

disassembled.