Washer-dryer stack connection set. Bosch WTA4409GB/05, WTA4409GB/03, WTA4409GB/04, WTA4409GB/02, WTA4408GB/01, WTA4409GB/01

Washer-dryer stack connection set

Order no.: WTZ 1250

Assembling the exhaust air hose

The dryer can be placed on top of a Bosch washing machine of the same dimensions to save space.

!

Risk of injury

For reasons of safety, the dryer must be installed by an expert. Always use a connection set to secure the dryer to the washing machine.

There are exhaust air outlets in the left side wall and the rear panel of the dryer.

Select the most suitable exhaust air outlet after installing the dryer.

Cover the other outlet with the accompanying fascia cover – turn it in a clockwise direction.

1 Plastic cover

2 Exhaust air hose

Place the end of the exhaust air hose in the open air without bending the hose. The exhaust air hose should only be positioned horizontally or vertically and never left to sag.

The exhaust air hose should not be more than 2 m long.

Position the exhaust air hose so that there is no counterpressure (e.g. from wind) on the exhaust outlet.

27