Electrical connection. Bosch WTA4409GB/05, WTA4409GB/03, WTA4409GB/04, WTA4409GB/02, WTA4408GB/01, WTA4409GB/01

Electrical connection

Only connect the dryer to an earthed outlet installed in accordance with regulations.

Make sure that the voltage details on the rating plate (visible when the door is open) correspond with the mains voltage where the appliance is set up. The connected load and the fuse or miniature circuit breaker are also specified on the rating plate.

Make sure that the plug and the socket match, the cross section of the cable is sufficient and the earthing system has been installed in accordance with regulations.

Do not use multiple plugs/adapters or an extension cable.

Only pull the mains plug out of the socket using the grip on the plug. Do not connect the appliance to the mains with wet hands.

Only have the mains cable replaced by the after-sales service.

If the power cable for the dryer is damaged, have it replaced by the manufacturer or its after-sales service.

28

ROBERT BOSCH

HAUSGERÄTE GMBH

WTA4408/9000182407

141694/en (04-06)