Advertisement
Advertisement
3. After the SSD/HDD is placed back into the enclosure and the four screws are screwed, the
SSD/HDD enclosure will be shown as the diagram.
4. Finally, please insert the SSD/HDD enclosure into the HDD tray on the left side of the NVS-
40 and then slide the
LOCK/UNLOCK switch to the LOCK side as shown as the diagram. After the SSD/HDD enclosure is inserted and locked, the LED indicator will be lit.
Chapter 5 NVS-40 Web Control User Interface
After connecting the NVS-40 to the public network by following the steps of the quick start guide in the previous chapter, users can control the NVS-40 by the Web
Control User Interface now. Please refer to following chapters for details of the setting and control of the NVS-40 Web Control User Interface.
5.1 Main Control Interface
After the IP address of the NVS-40 is detected by the IP Finder utility software, users can enter the detected IP address into the address bar of the web browser, and then the NVS-40 Web Control User Interface will be shown as follows. In this example, the detected IP address is “192.168.1.244”.
The main options of the NVS-40 Web UI include Source, Encoder, Record, Streaming,
CG, PGM, Monitor, System, Status and Advance. All of those options will be shown on the toolbar menu.
21
5.2 Source
The tag1, 2, 3 and 4 represent the video and audio input sources for channel 1 to channel 4. Due to that the video input source for the channel 1 can be SDI, HDMI or
IP Stream, users can see the SDI and HDMI tags for the channel 1 which are shown as following diagram. Users can press the “HDMI” tag from the “Source” option on the toolbar menu to adjust the brightness, contrast, hue and saturation values by the sliders. After the adjustment is finished, users can press the “Apply” button to apply and save the settings. If users want to restore the related values back to the factory default values, please press the “Reset” button. The Embedded, Line-in and XLR audio input sources will be shown below the sliders. The video and audio tags with colors represent current input situation.
If the Input Source is SDI
22
If the Input Source is HDMI
If the Input Source is IP Stream
The IP Stream function allows users to use the IP Stream to be the input source and the NVS-40 can acquire the streaming video remotely.
23
Please follow following steps for using the IP Stream to be the input source of the
NVS-40.
Step 1. Please copy the streaming address from the streaming source.
Step 2. Please click “IP Stream” from the web UI of the NVS-40 and then please paste the copied streaming address to the “Source URL” column in the IP Stream interface.
After that, please press the “Apply” button. Note: If there is no special need, please set this “Source URL” column as UDP.
24
The input source related information will be shown on the bottom of the “Source” page. If the streaming video is decoded by the NVS-40 correctly, the word “IP
Stream” and resolution will be shown.
Step 3. At this time, the NVS-40 can acquire the streaming video remotely.
The interfaces for video and audio input sources for Channel 2 to Channel 4 are shown as following diagram.
25
For the input source, if “Line-in” or “XLR” is selected, there is a slider for users to adjust the volume. However, this interface also allow users to select the audio source to be “SMPTE”, “EBU” or “Manual”. After the setting is finished, please press the “Apply” button to apply the setting.
All of the input sources related information will be shown on the bottom of the
Source page which is shown as following diagram.
26
5.3 Encoder
Users can see the Encoder control page by pressing the Encoder option on the menu bar. There are five tags including tag1, tag 2, tag 3, tag4 and PGM which are shown in the “Encoder” control page. Each tag allows users to set parameters in two Encoders including Main Encoder and Sub Encoder. Users can set 8 parameters including
Resolution, Frame Rate, Profile, Level, Entropy, GOP, Video Bitrate(bps) and Audio
Bitrate(bps) for the Main Encoder and Sub Encoder separately. The Channel 1,
Channel 2, Channel 3, Channel 4 and PGM output signals can apply different Main
Encoder and Sub Encoder settings, which means that there are 10 parameters that can be set by users from the Encoder page. After the adjustment is finished, users can press the “Apply” button to apply and save those settings. If the input source is the SD signal, the aspect ratio option is added for the Encoder option. If the input source is not the SD signal, the aspect ratio option will not be shown.
Note: Please pay attention that the total frame rate setting for the Record+Stream must be within 300 FPS. The following table provides the example for the total frame rate setting.
Record
Channel Frame Rate
1
Main Encoder
：
60FPS
Sub Encoder
：
2
3
30FPS
Main Encoder
：
Disable
Sub Encoder
：
Disable
Main Encoder
：
4
Disable
Sub Encoder
：
Disable
Main Encoder
：
Disable
Sub Encoder
：
Disable
Streaming
Channel Frame Rate
1
Main Encoder
：
60FPS
Sub Encoder
：
2
3
30FPS
Main Encoder
：
Disable
Sub Encoder
：
Disable
Main Encoder
：
4
Disable
Sub Encoder
：
Disable
Main Encoder
：
Disable
Sub Encoder
：
Disable
27
PGM
Main Encoder
：
30FPS
PGM Main Encoder:
30FPS
Sub Encoder
：
Sub Encoder
：
15FPS 15FPS
Total FPS=60+30+30+15+60+30+30+15=270<300
For the introduction about each drop-down menu in the Encoder page, please see following table.
Resolution
The Resolution drop-down menu allows users to select different
Encoding resolutions.
28
Frame Rate
The Frame Rate drop-down menu allows users to select different Frame
Rates.
Note: Please pay attention that the total frame rate setting for the
Record+Stream must be within 300
FPS.
Profile
Users can select three Profile settings including High, Main and Baseline.
Level
Users can select different Encoding levels from the drop-down menu which is shown as the diagram.
GOP
Users can select different GOP from this drop-down menu.
29
Video Bitrate (bps)
Users can select different Video
Bitrate settings from this drop-down menu.
Audio Bitrate (bps)
Users can select different Audio
Bitrate Settings from this drop-down menu.
Entropy
Users can select different Entropy algorithm settings including CAVLC and CABAC from the drop-down menu.
5.3.1 Setting Steps and Important Notices for Encoder Option Setting (Take Youtube as an Example)
Please follow following steps and important notices for setting related parameters of the Encoder option for the NVS-40.
Step 1. Users need to go to the streaming platform/streaming media server to confirm their recommended Encoder settings. After that, please set a closest value for your NVS-40.
30
Note: For the live-streaming, the quality of the video is the most important. So, please make sure to set suitable resolution according to your network connection speed to assure that the streaming video can be played smoothly. It is recommended to test the data upload bitrates before starting the live-streaming. If users use
“Stream Now” option, it is no need for you to set your desired resolution, Framerate and Video bitrate due to that those settings will be detected automatically by the
“Stream Now” function. If you start your live-streaming by the “Events” option, what you need to do is to select one streaming token with variable resolutions to have the advantage of the “Stream Now” option. Moreover, users can select their desired resolution and framerate settings manually and then Youtube will encode your streaming video automatically to produce multiple output formats to fit different network speed and device demands for the audience of the live-streaming. Before the live-streaming is started, please make sure that the test is done. The content of the test should include the content that is similar to the live-streaming content.
During the live-streaming period, users can monitor the streaming situation and check the error messages.
Step 2. Set the Profile Option. Due to that there is little difference for different
Profile settings. So, it is recommend to fix the Profile option at “High”.
For the HD or 720P resolution, please set the Profile at “High”.
For the 720 resolution, please set the Profile at “Main”.
For the resolution which is below the 720, please set the Profile at “Baseline”.
Step 3. Please set the Entropy option at CABAC (The recommended value of the
Yoututbe platform).
Step 4. Set the Video Bitrate (bps). Please follow following Youtube platform recommended values for setting the Video Bitrate.
1080P
：
3,000 - 6,000 Kbps
720p @60fps
：
2,250 - 6,000 Kbps
720p
：
1,500 - 4,000 Kbps
480p
：
500 - 2,000 Kbps
240p
：
300 - 700 Kbps
Step 5.
Set the Audio Bitrate (bps). The recommended Audio Bitrate is 128K.
31
Step 6. Set the GOP. The recommended GOP values for the Youtube platform are shown as following table.
Frequency for playing the I Frame (Key Frame): The recommended setting is 2 seconds and this value must not exceed 4 seconds.
The setting values for the 2 seconds I Frame Interval are shown as following table
.
Resolution and Frame Rate
1080P@50
1080i@50
1080P@60
1080i@60
1080P@25
1080P@30
GOP Value
GOP=100
GOP=50
GOP=120
GOP=60
GOP=50
GOP=60
5.3.2 Important Notices for Setting the Encoder (Take Facebook Platform as an
Example)
If users want to stream at the Facebook Platform, please follow following important
Notices for streaming by the Facebook Platform.
The recommended upper limit for the Video Bitrate (bps) setting is 4000kbps
(4mbps).
The recommended upper limit for setting the Resolution option is 720p (1080 x 720).
The upper limit for setting the Frame Rate is 30fps.
During the streaming period, the I-Frame must be sent in every 2 seconds. (Key
Frame)
.
The title must be within 255 characters or the streaming will be failed.
The Facebook platform supports for H.264 encoded video and AAC encoded audio only.
If the resolution for the video source is 1280*720P@30, it is fine to set the resolution at “Same as Input”.
If the source resolution is 1280*720P@60/50, the setting for frame rate must be changed to 30 or 25.
32
If the source resolution is 1920 x 1080, please set the video bitrate (bps) as
1280*720 from the drop-down menu due to that the upper limit for the resolution is
1280*720.
Because the upper limit for the recommended video bitrate for the Facebook platform is 4000kbps, so, it is a must for users to set the video bitrate to less than
4mbps.
During the streaming, the Key Frame must be sent for every two seconds which is the same as Youtube platform’s demand.
The setting values for the 2 seconds I Frame Interval are shown as following table.
Resolution and Frame Rate
1080P@50
1080i@50
1080P@60
1080i@60
1080P@25
1080P@30
GOP Value
GOP=100
GOP=50
GOP=120
GOP=60
GOP=50
GOP=60
33
5.4 Record
After pressing the Record option from the menu bar of the NVS-40 Web UI, users can see the Record option control page. There are five tags including tag 1, tag 2, tag 3, tag 4 and PGM. Each tag includes two Record settings including Main Record and Sub
Record. So, it means that users can record up to 10 video sources with different codings and video formats. After the setting is completed, users can press the “Start
Record” or “Stop Record” button to start or stop the video recording. When the
Advance Mode is activated and the REC LED indicator is flickering in red, it means that the recording function can not be used.
34
For the introduction for each drop-down menu of the Record page, please see following table.
Encoder Source
Users can select Main Encoder,
Sub Encoder or Disable from the Encoder Source drop-down menu.
File Name
Users can enter their desired
File Name into the blank.
File Type
Users can save the recorded file in different file formats including MP4, TS and MOV by this drop-down menu.
Duration (min.
）
Users can determine the duration of each recorded file including 1 min., 5 min., 30 min., 60 min., 120 min., and
Unlimitation by this drop-down menu.
5.5 Streaming
After pressing the Streaming option from the menu bar of the NVS-40 Web UI, users can see the Streaming control page. There are five tags including tag 1, tag 2, tag 3, tag4 and PGM. Each tag includes two Streaming settings including Main Streaming and Sub Streaming. So, it means that users can stream up to 10 video sources with different codings and video formats. After the streaming setting is completed, users
35
can press the “Apply” button to apply the setting. Moreover, users can press the
“Start Stream” or “Stop Stream” button to start or stop the streaming.
5.5.1 User Interface for Different Streaming Formats
The streaming option of the NVS-40 Web UI provides different streaming formats for users including RTMP, RTMPS, RTSP, TS and HLS. The user interfaces of different streaming formats are shown as following diagrams.
RTMP/RTMPS
RTSP
36
TS
HLS
For the introduction for each drop-down menu of the Streaming page, please see following table.
Encoder Source
Users can select Main
Encoder, Sub Encoder and Disable from the
Encoder Source dropdown menu.
37
38
Stream Type
Users can select stream protocols including RTSP, RTMP,
TS and HLS from this drop-down menu.
Note: If users want to use the RTMPS streaming protocol, please select the RTMP
Stream Type.
RTMP URL
Before starting the
RTMP streaming, users need to obtain streaming server address and streaming token from their desired streaming platform such as
Youtube or Facebook.
After that, please enter the streaming server address and streaming token into the RTMP URL blank according to following format.
Streaming Server
Address/Streaming
Token
Finally, please press
Start Stream or Stop
Stream button to start or stop the livestreaming.
Note: If users want to use the RTMPS streaming protocol, please enter the
RTMPS address into this RTMP URL column.
Account and Password
These two blanks allow users to enter the
Account and Password of the RTSP streaming.
The default account and password are shown as following.
Account: root
Password: root
RTSP Port and RTSP
HTTP Port
These two blanks will show RTSP port No. and RTSP Http port No.
The range for default
RTSP port No. is from
554~562. The range for default RTSP http port No. is 8555~8563.
Session Name
The default RTSP
Session Name is
“session0.mpg”.
.
TS URL
This column allows users to enter the TS
URL.
39
5.5.2 Streaming-RTSP (Use RTSP Protocol)
The NVS-40 allows users to stream by using the RTMP, RTMPS, RTSP, TS and HLS streaming protocols. For the steps for streaming by those protocols, please see following paragraphs.
1. Please use an RJ-45 Ethernet cable to connect one end to the public network and then connect another end to the WAN port of a router.
2. Please use another RJ-45 Ethernet cable to connect one end to the LAN port on the rear panel of the NVS-40 and then connect another end to one of the LAN port of the router.
3. Please use another RJ-45 Ethernet cable to connect one end to the LAN port of the
PC/Laptop and then connect another end to the LAN port of a router.
4. Please open Datavideo IP Finder software and then please press the Scan button to find the IP address of the NVS-40. (Please refer to Chapter 4. Quick Start Guide-
Connection and Setting)
5. Please enter NVS-40’s IP address into the address bar of the web browser to open the web control interface of the NVS-40.
6. Please click the Streaming option from the web control interface to open the streaming control interface.
7. Please select Main Encoder or Sub Encoder from the Encoder Source drop-down menu.
8. Please select RTSP from the Stream Type drop-down menu of Main Encoder or
Sub Encoder.
40
9. Please press the “Start Stream” button and then the RTSP streaming address will be generated.
10. Please download the VLC media player from https://www.videolan.org
and then install the software.
11. Please open the VLC and then click “Media” drop-down menu and then click
“Open Network Stream”.
41
12. Please enter the streaming address that is generated by the NVS-40 into the
“Please enter a network URL” column and then please press the Play button for playing the streaming.
5.5.3 Streaming-TS (Use TS Protocol)
1. Please use an RJ-45 Ethernet cable to connect one end to the public network and then connect another end to the WAN port of a router.
2. Please use another RJ-45 Ethernet cable to connect one end to the LAN port on the rear panel of the NVS-40 and then connect another end to one of the LAN port of the router.
3. Please use another RJ-45 Ethernet cable to connect one end to the LAN port of the
PC/Laptop and then connect another end to the LAN port of a router.
4. Please open Datavideo IP Finder software and then please press the Scan button to find the IP address of the NVS-40. (Please refer to Chapter 4. Quick Start Guide-
Connection and Setting)
42
5. Please enter NVS-40’s IP address into the address bar of the web browser to open the web control interface of the NVS-40.
6. Please click the Streaming option from the web control interface to open the streaming control interface.
7. Please select Main Encoder or Sub Encoder from the Encoder Source drop-down menu.
8. Please select TS from the Stream Type drop down menu of Main Stream or Sub
Stream.
9. Please enter the IP address of your PC which is shown by the IP Finder software into the TS URL column by following format. Take 192.168.100.100 as an example, the TS streaming address will be udp://192.168.100.100:1000
10. Please press the “Start Stream” button and then the TS streaming address will be generated by the NVS-40.
43
11. Please download VLC media player from https://www.videolan.org and then please install the software.
12. Please open the VLC and then click “Media” drop-down menu and then click
“Open Network Stream”.
44
13. Please enter the streaming address that is generated by the NVS-40 into the
“Please enter a network URL” column and then please press the Play button for playing the streaming. Take above address as an example, the address will be udp://192.168.100.100:1000
5.5.4 Streaming-RTMP (Use RTMP Protocol) (Take Youtube as an Example)
1. Please use an RJ-45 Ethernet cable to connect one end to the public network and then connect another end to the WAN port of a router.
2. Please use another RJ-45 Ethernet cable to connect one end to the LAN port on the rear panel of the NVS-40 and then connect another end to one of the LAN port of the router.
3. Please use another RJ-45 Ethernet cable to connect one end to the LAN port of the
PC/Laptop and then connect another end to the LAN port of a router.
45
4. Please go to Youtube website https://www.youtube.com/live_dashboard and then please click the “Stream Now” option from the left column.
5. The Server URL and Stream Name/Key will be shown on the bottom of the
Youtube page.
6. Please open Datavideo IP Finder software and then please press the Scan button to find the IP address of the NVS-40. (Please refer to Chapter 4. Quick Start Guide-
Connection and Setting)
7. Please enter NVS-40’s IP address into the address bar of the web browser to open the web control interface of the NVS-40.
8. Please click the Streaming option from the web control interface to open the streaming control interface.
9. Please select your desired Encoder Source from the Encoder Source drop-down menu and then please select RTMP from the Stream Type drop-down menu.
46
10. Please copy the Server URL and Stream Name/Key that are provided by the
Youtube Live website and then paste them into the RTMP URL column in the
Streaming control page. The format for entering the Server URL and Stream
Name/Key is shown as following.
Server URL/Stream Name
11. Please press the “Start Stream” button and then the video can be streamed by the Youtube platform.
5.5.5 Streaming-RTMP (Use RTMP Protocol) (Take Facebook as an Example)
1. Please use an RJ-45 Ethernet cable to connect one end to the public network and then connect another end to the WAN port of a router.
2. Please use another RJ-45 Ethernet cable to connect one end to the LAN port on the rear panel of the NVS-40 and then connect another end to one of the LAN port of the router.
3. Please use another RJ-45 Ethernet cable to connect one end to the LAN port of the
PC/Laptop and then connect another end to the LAN port of a router.
47
4. Please go to Facebook website https://www.facebook.com/live/create , and then please click “Create Live Stream” button. Note: In Facebook platform, each streaming must be within 4 hours.
5. The following screen will be shown, please check “Use a persistent stream key” and then please copy “Server URL” and “Persistent Stream Key”. Finally, please paste them into the “RTMP URL” column and “Stream Name” column respectively in the
Streaming option of the NVS-40 web-based control interface.
48
6. After the Server URL and the Persistent Stream Key are pasted into the column, please press the “Start Stream” button. rtmp://live-api-s.facebook.com:80/rtmp/10205210705024920?s_ps=1&s_sw=0&s_vt=api -s&a=AbyaFOlMSeHJpgTl
7. The preview screen will be shown on the Facebook live-stream page. Please choose the section that you want to post your live broadcast and the audience who can see the live broadcast. Finally, please press the “Go Live” button to start streaming the video to the Facebook page.
49
5.5.6 Streaming –HLS (Use HLS Protocol)
1. Please select your desired Encoder Source from the Streaming page and then choose HLS from the Stream Type drop-down menu. After that, please press the
“Start Stream” button.
2. NVS-40 will generate a stream address with .m3u8 file extension.
3. Please play the .m3u8 stream address by following ways.
For iPhone, iPad and MacBook
：
Please open the .m3u8 steam address by Safari web browser.
For Windows 10: Please use Microsoft Edge web browser to open the .m3u8 stream address.
For Non-Windows 10:
50
1. Please download VLC media player from https://www.videolan.org and then please install the software.
2. Please open the VLC and then click “Media” drop-down menu and then click
“Open Network Stream”.
51
3. Please enter the streaming address that is generated by the NVS-40 into the
“Please enter a network URL” column and then please press the Play button for playing the streaming.
52
5.6 CG
After pressing the CG option on the web control interface, users can see the CG option control page. There are five tags including tag 1, tag 2, tag 3, tag 4 and PGM for users to set different CG parameters for Channel 1, Channel 2, Channel 3,
Channel 4 and PGM. After all CG parameters are set, users can press “Start CG” and
“Stop CG” button to overlay desired characters or pictures to specific input source or
PGM. Moreover, it allows users to remove the CG from specific input source or PGM.
Please see following diagram for the main interface of the CG option.
The parameters for CG option drop-down menus are shown as following table.
CG Layer
Users can select different
CG layers to determine their desired layer to place characters or pictures
CG Type
Users can select character or picture to be the CG source from this dropdown menu.
53
Text
If users select text to be the CG source, users can enter their desired texts into this column.
Location-X/Location-Y
Users can determine the
X-axis and Y-axis of the CG source. (Text/Picture)
Width and Height
Users can enter different values to determine the
Width and Height of the
CG source.
Foreground Color
Please enter different parameters in these blanks to determine different foreground color for the CG source. Users can select their desired color from the color spectrum on the left side.
After the desired color is selected, please press the color wheel button on the bottom right side to confirm the color selection.
54
Text Size
Please enter different figure to change the text size.
File Path
If users select a picture to be the CG source, please press the Browse button to select your desired picture from the hard disk of your PC or laptop.
5.6.1 How the Location X & Location Y values Affect CG Source
1. Text
：
Users can adjust the Location-X and Location-Y values to change the position of the inserted text on the screen.
Location-X: For Location-X, the more the value, the more the text will be moved from the left side to the right side.
Location-Y: For Location-Y, the more the value, the more the text will be moved from the up side to the down side.
Example: Location-X=700, Location-Y=600
55
You are my Friend
Example
：
Location-X
＝
900
，
Location-Y
＝
500
56
2. Picture
：
Users can adjust the Location-X and Location-Y value to change the position of the inserted picture on the screen.
Location-X: For the Location-X, the more the value, the more the picture will be moved from the left side to the right side.
Location-Y: For the Location-Y, the more the value, the more the picture will be moved from the up side to the down side.
Width and Height: Users can enter different value to control the width and height of the inserted picture.
Example: Location-X=400, Location-Y=100, Width=1500, Height=1080
57
58
5.7 PGM
After pressing the PGM option on the menu bar of the web UI, users can see the control page 0f the PGM option. The PGM option provides five modes for displaying the PGM screen including Quad View, Full Screen, POP, PBP and PIP. The main interface of the PGM option is shown as following diagram.
59
1. Quad View: Please press the “Quad View” icon and then please press the “Apply” button for applying the setting.
2. Full Screen: Please press the “Full Screen” icon and then please select the channel that is desired to be shown in Full Screen mode. After that, please press the “Apply” button for applying the setting.
60
3. POP (Picture Outside Picture): Please press the POP icon and then please select the channels that are desired to be shown in POP mode. After that, please press the
“Apply” button for applying the setting.
4. PBP (Picture By Picture): Please press the PBP icon and then please select the two channels that are desired to be shown in the PBP mode. After that, please press the
“Apply” button for applying the setting.
61
5. PIP (Picture in Picture): Please press the PIP icon and then please select the two channels that are desired to be shown in the PIP mode. After that, please press the
“Apply” button for applying the setting.
62
5.7.1 Scale
There is a “Scale” drop down menu including “Stretch”, “Fit” and “Full” in the PGM user interface for users to apply in the POP and PBP mode.
Please see following paragraphs for the introduction of the three modes including
“Stretch”, “Fit” and “Full”.
Stretch: If the “Stretch” is selected, the PGM screen will be stretched to up side and down side.
Fit: If the “Fit” is selected, the PGM screen will be shown in original scale.
Full: If the “Full” is selected, the PGM screen will be enlarged and the part that is over the screen will be cut off.
Please see following diagrams to tell the differences for those modes.
63
1. The PGM option is set to POP mode and the Scale drop-down menu is set to
“Stretch”.
2. The PGM option is set to POP mode and the Scale drop-down menu is set to “Fit”.
64
3. The PGM option is set to POP and the Scale drop down menu is set to “Full”.
4. The PGM option is set to PBP mode and the Scale drop-down menu is set to
“Stretch”.
65
5. The PGM option is set to PBP and the Scale drop-down menu is set to “Fit”.
6. The PGM option is set to PBP and the Scale drop-down menu is set to “Full”.
66
5.7.2 PGM Background Color
The Background Color option in the PGM option allows users to select different colors when displaying in PBP mode. Please follow following steps for changing the background color of the PGM option.
Step 1. Please press the background color option and then please select your desired color by entering the RGB or HSB code to the right side of the pop-up color picker.
Moreover, users can select their desired background color from the color spectrum on the left side.
Step 2. After the desired color is selected, please press the color wheel button on the bottom right side to confirm the selection.
Step 3. Please press the “Apply” button to confirm the selection.
5.7.3 PGM Audio Source Selection
The NVS-40 provides PGM audio signals including CH1 Embedded, CH2 Embedded,
CH3 Embedded, CH4 Embedded, XLR and RCA for users to select from the drop-down menu.
67
5.8 Monitor
After pressing the Monitor option on the menu bar of the web UI, users can see the control page is shown. There are four HDMI frame rate including 60FPS, 50FPS,
30FPS and 25FPS for users to select. Moreover, it allow users to adjust the output volume.
68
5.9 System
After pressing the System option on the menu bar of the web control interface, users can see the system control page. The system control page allows users to set five system related parameters including network setting, Time Setting, Firmware
Update, Disk Format and System Control. The system control page is shown as following diagram.
69
Network Setting
DHCP
The default Network mode for the NVS-40 is
DHCP mode, if users select “Disable”, they need to enter related information manually by themselves.
Static IP
/
Subnet
Mask
/
Default
Gateway
/
Primary
DNS
/
Secondary DNS
Due to that the default network mode of the
NVS-40 is the DHCP mode, once the DHCP mode is set to Enable, all of the network related parameters will be set automatically. If the
DHCP mode is set to
Disable, users need to enter all parameters manually by themselves.
When the network related parameters are set, please press the
“Apply” button to finish the setting. For restoring the network related settings to factory default values, please press the “Default” button.
Account and Password
70
71
Please enter your desired Account and
Password. After that, please press the “Apply” button to set or modify the Account and
Password for logging in the NVS-40 web UI.
Time Setting
This allows users to set the system time.
Firmware Update
Please download the latest firmware which the file name is
“nvs40_x_x_x.gz” from
Datavideo official website www.datavideo.com
After the latest firmware is downloaded, please select the
“nvs40_x_x_x.gz” firmware from the hard disk of your PC/laptop by pressing the
“Browse” button. After the latest firmware is selected, please press the “Update” button to start the firmware update procedure.
FPGA Update
This function allows users to update the
FPGA. Please press the
“Browse” button to select the FPGA file and then please press the
“Update” button for updating the FPGA.
Disk Format
The “Format Type” drop-down menu allows users to format the
SSD/HDD to FAT, NTFS or exFAT format. Users can select their desired disk file format and then press the “Format” button to format their
SSD/HDD.
From the Device column, users can realize the interface of the hard disk and the remaining space of the
SSD/HDD.
72
Device Name Setting
Please enter your desired device name in the “Device Name” column and then please press “Apply” button for setting the device name.
Other Option
The “Other Option” allows users to set
“Timeout Period” and
“Auto Streaming
Restart” functions.
When the desired settings are set by users, please press the “Apply” button to apply the setting.
System Control
Please press the
“Restore to Default” button to restore the
NVS-40 back to factory default value.
Please press the
“Reboot” button to reboot the NVS-40.
73
5.9.1 How to Set the Time Automatically and Manually
Please follow following steps for setting the system time of the NVS-40 automatically or manually.
Automatically from the Internet
This option allows users to synchronize the system time to the NTP server automatically. Please follow following steps for setting the system time automatically.
1. Please select the “Automatically from the Internet” option from the “Type” dropdown menu.
2. Please enter your desired NTP server in the “NTP Server” column. The following diagram takes Google public NTP server as an example.
3. Please select your Timezone from the “Timezone” drop-down menu.
74
4. Please press the “Apply” button for applying the setting.
Manually
This option allows users to set the system time manually, please follow following steps for setting the system time.
1. Please select the “Manually” option from the “Type” drop-down menu.
2. Please select your Timezone from the “Timezone” drop-down menu.
75
3. Please enter the correct Date and Time into the “Date” and “Time” columns.
4. Please press the “Apply” button for applying the setting.
Note: If the “Automatically from the Internet” option is selected, users still need to select the Timezone manually by themselves. If the system is restored to the factory default value, the Timezone setting will be kept and will not be changed.
76
5.9.2 How to Restore the Factory Default IP Address of the NVS-40
Note: This function can be supported only for the version 1.4.3 or later firmware.
The function is effective only when pressing three buttons including MODE, RECORD and STEAM buttons simultaneously when the NVS-40 is powering on.
Please press the MODE, RECORD and STREAM buttons on the front panel of the NVS-
40 simultaneously when the NVS-40 is powering on and then the IP address of the
NVS-40 will be restored to factory default value: 192.168.1.200
5.9.3 The Recommended SSDs for the NVS-40
Please see following table for the recommended SSDs which can be used in the NVS-
40 for users’ reference.
Item
1
Brand/Model
Sandisk X110
Capacity
128GB/256GB
Product Picture
2 SANDISK X300S 256GB
3 SANDISK Ultra Plus 128GB/256GB
77
4 INTEL 530 240GB
8
9
5
6
7
SANDISK Extreme 120GB
SANDISK Extreme
Ⅱ 240GB
Samsung 850 PRO
Samsung 840PRO
Crucial M500
256GB
512GB
120GB
78
5.10 Status
After pressing the Status option on the menu bar of the web UI, users can see the
Status control page. The Status control interface provides details for following items.
Input Information for Channel 1 to Channel 4
Record Status information for Channel 1 to Channel 4 and PGM
Stream Status for Channel 1 to Channel 4 and PGM
79
The hard disk information of the inserted hard disk on the front panel.
5.11 Advanced
The “Advanced” option allows users to stream specific video input source including
CH1 input, CH2 input, CH3 input, CH4 input or PGM to up to 10 streaming platforms by 10 different encodings. Those 10 different encodings include Stream 1 Main,
Stream 1 Sub, Stream 2 Main, Stream 2 Sub, Stream 3 Main, Stream 3 Sub, Stream 4
Main, Stream 4 Sub, Stream PGM Main, and Stream PGM Sub.
Please follow following steps for streaming one of the input among the input 1 to input 4 & PGM to up to 10 streaming platform.
Step 1. Please make sure that the related settings of the Main Encoder and Sub
Encoder for Input 1 to Input 4 and PGM and the related streaming settings of the
Input 1 to Input 4 in the Streaming option are set in advance.
80
Step 2. Please select your desired input source from the Video Source drop-down menu.
Step 3. Please check the checkbox of your desired Encoder Source.
Step 4. Please press the “Start Stream” button for starting streaming.
81
5.12 The Reason Why Users Can not See the Latest Web UI and the
Solutions for this Issue
Generally speaking, the reason why users can not see the latest status of the NVS-40 web UI is due to the issue of the internet browser cache. Web browsers usually provide cache for accelerating the web-browsing speed. So, the content that is shown in your web browser will show you the latest information in the cache of your web browser. For the Microsoft IE browser, please press the “Refresh” button to update the information of your web browser. For the Google Chrome browser, please press “Reload this page” button to update the information of your browser.
After that, the latest web page will be shown. If the latest web page can not be shown, please clear the cache and update the setting of your web browser according to following steps. There are four ways for solving this issue.
How to clear the cache for the IE web browser
Step 1. Please open the IE web browser, press the “Tools” button and then press the
“Internet Options”.
82
Step 2. Please press the “Delete” button from the Browsing History.
Step 3. Please press the “Delete” button in “Delete Browsing History”.
83
How to Clear the Cache for the Chrome Web Browser
Step 1: Please open the Chrome web browser, press the “Customize and Control
Google Chrome” on the top-right side and then please press “Settings” from the drop-down menu.
Step 2. Please press “Advanced” and then please press “Clear browsing data”.
84
Step 3. Please press “All Time” from the “Time Range” drop-down menu and then please check the checkbox of “Cached images and files”. Finally, please press the
“Clear data” button.
How to Clear the Cache for the FireFox Browser
Step 1. Please open the FireFox browser and then please press “Options” from the
“Open menu” drop-down menu.
85
Step 2. Please press “Privacy & Security” option.
Step 3. Please press “Clear History” button from the “History” option.
86
Step 4. Please select “Everything” from the “Clear Recent History” drop-down menu and then please check “Cache”. Finally, please press the “Clear Now” button.
87
Forced-Clear the Cache Manually to Reload the Web pages.
Please press the “Ctrl” + “F5” buttons simultaneously to force download the web pages.
88
Advertisement