Chapter 1 Get to Know About Your Router
LED Explanation
Name
(2.4GHz Wireless)
( 5GHz Wireless)
(Ethernet)
Status
On
Off
On
Off
On
Off
Green On
(Internet)
(WPS)
Orange On
Off
On/Off
Flashing
Indication
The 2.4GHz wireless band is working properly.
The 2.4 GHz wireless band is disabled.
The 5GHz wireless band is working properly.
The 5GHz wireless band is disabled.
At least one Ethernet port is connected.
No Ethernet port is connected.
Internet is available.
The router’s Internet port is connected, but the Internet is not available.
The router’s Internet port is not connected.
Turns on when a WPS connection is established, and goes off about
5 minutes later.
A wireless device is trying to connect to the network via WPS. This process may take up to 2 minutes.
1. 2. 2. The Back Panel
The following parts (view from left to right) are located on the rear panel.
Item
Power Port
Description
For connecting the router to a power socket via the provided power adapter .
4
Chapter 1 Get to Know About Your Router
Item Description
Power On/Off Button Press this button to power on or off the router.
WPS/Wi-Fi On/Off Button
Press this button for about 2 seconds to turn on or off the wireless function of your router.
Press this button, and immediately press the WPS button on your client device.
The WPS LED of the router should change from flashing to solid on, indicating successful WPS connection.
Reset Button
Antennas
Press this button for about 5 seconds to reset the router to its factory default settings.
Internet Port For connecting to a DSL/Cable modem, or Ethernet port.
Ethernet Ports (1/2/3/4) For connecting your PCs or other wired network devices to the router
Used for wireless operation and data transmitting. Upright them for the best Wi-Fi performance.
5
