rst operation. Groupe Brandt KGIT122FD

Add to My manuals
24 Pages


 rst operation. Groupe Brandt KGIT122FD | Manualzz



rst operation

• The appliance is manufactured in compliance with all relevant safety standards; however, it is recommended that persons with impaired physical, motional, or mental abilities, or persons with inadequate experience and knowledge, do not use the appliance without due supervision. The same recommendation applies to minors using the appliance.

• Before connecting the appliance read these instructions carefully. They describe the appliance and provide instructions for its safe and correct use. The instructions are prepared for different types and models of the appliance so they may contain descriptions of functions and components your appliance may not have.

• Remove the wrapping protecting the appliance during transport.

• Wrappings contain environmentally friendly materials which can be recycled, recovered or disposed off without threat to the environment.

• Door corners are fi tted with protective spacers. Remove the spacers and replace them with the attached pegs.

• Before connecting the appliance to the mains supply, leave it in upright position for about 2 hours. This will reduce possibility of malfunctions in the cooling system resulting from prior transport and handling.

• The appliance must be connected to the mains supply in accordance with the standing regulations and local requirements.

• The appliance must not be used in open air or exposed to weather precipitation.

• Always disconnect the appliance from power supply (pull the power cord from wall socket) before cleaning and before replacing the light bulb.

• If the power supply cord is damaged, in order to avoid hazard it must be replaced by the service or by quali fi ed personnel.

• In case of longer disuse fi rst turn the appliance off with the ON/OFF button and disconnect it from mains supply. Empty the appliance, clean the interior and leave the door ajar.

• For the protection of environment deliver the obsolete appliance to the authorized scrap appliance dealers.

• Never let the children play with the appliance.

• Self closing shear door hinge pulls the door to the cabinet just before closing, thereby preventing the door to remain ajar. Equally it limits the door opening angle and prevents damage to adjacent elements.

• Rating plate with basic information is located in the interior of the appliance. If the sticker plate is not suitable for your language, replace it with the attached one.


Ventilation slots on the appliance or built-in element should always be kept clean and unobstructed.


Do not use any mechanical accessories when thawing the refrigerator, except for those explicitly recommended by the manufacturer.


To prevent any pollution be careful not to damage the insulation or refrigeration tubes at the rear wall during the installation, cleaning and disposal of the appliance.


Do not use any electrical devices inside the appliance, except for those explicitly recommended by the manufacturer.


The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of thisproduct. For more detailed information about recycling of this product, please contact your local city of fi ce, your household waste disposal service or the shop where you purchased the product.



Related manuals

Frequently Answers and Questions

What is the recommended temperature setting for the appliance?
The recommended thermostat knob setting for most refrigerators is to the ECO position, unless the room temperature is lower than 16°C, in which case it should be set to Max.
What is the SF/SC position on the control panel?
SF stands for "Super frost" and indicates fast freezing, while SC stands for "Super cool" and indicates fast cooling.
How do I change the direction of the door opening?
Tilt the appliance, unscrew the bottom hinge, disassemble as shown in Figure 3 of the manual, then reassemble the parts in the opposite turn, using the attached opposite hinge insert piece.
What should I do if the door seal does not rest well?
Remove the door seal and turn it by 180°.
How does the appliance temperature get set?
The appliance temperature is set by turning the button (B) on the control panel to the position between the Min and Max span.