Cleaning the appliance. Groupe Brandt KGIT122FD

Add to My manuals
24 Pages


Cleaning the appliance. Groupe Brandt KGIT122FD | Manualzz

• Never use powered appliances to defrost the freezer (hair dryer, etc.) -


• Avoid using defrosting sprays, as they may cause damage to the plastic parts and may be hazardous to health.

• Clean the interior of the appliance and wipe it dry (see chapter


• Before reloading food into the freezer switch the appliance on.

Cleaning the appliance

Prior any cleaning attempt disconnect the appliance from the mains

(see the control chapter for ON/OFF function), and pull the power cord from the mains wall outlet.

Special antibacterial protection in top layer of inner walls prevents multiplication of bacteria and maintains the interior clean and germ free.

Make sure to remove traces of any cleansing agents you had been using.

• Clean the of the appliance with water and liquid detergent.

• Do not use abrasive or aggressive agents (such as stainless steel cleansers) for cleaning of plastic and coated surfaces as you can damage them.

• Clean with soft cloth and alcohol based cleansing agent (for example glass cleaners).

• Wash the


of the appliance with liquid detergent and lukewarm water, mixed with a little vinegar.

• Containers, shelves, and drawers with a decorative pro fi le (metallic appearance) are not dishwasher safe! They can only be cleaned with a dissolved liquid detergent and a soft cloth. Do not rub them!

• Appliances without the ZERO’N’FRESH drawer: cooling surface on the rear wall is periodically defrosted. The drain groove and the outlet through which the water is discharged should not be clogged

(food residues).

Check them regularly and clean as required (e.g. with a plastic straw).

• The on the rear wall must always be clean and free of dust or kitchen fumes deposits, therefore clean the dust periodically with non-metallic brush or vacuum cleaner..



• Clean also the

drip pan

above the compressor. If you removed the pan, please make sure you replace it to the same position, and check that it is in completely horizontal position!

• Ice and/or frost deposits exceeding 3-5 mm increase energy consumption, so you need to remove them regularly (with the exception of the NO FROST model). Do not use sharp pointed objects, solvents or sprays.

• After cleaning switch the appliance on and reload the food.

In order to preserve your appliance, we recommend that you use


cleaning products.

The expertise of professionals for the bene fi t of individuals.


offers you professional products and ideal solutions for the day-to-day cleaning of your electrical appliances and kitchens.

You will fi nd them at your local retailer along with a range of additional products and comestibles.


Related manuals

Frequently Answers and Questions

What is the recommended temperature setting for the appliance?
The recommended thermostat knob setting for most refrigerators is to the ECO position, unless the room temperature is lower than 16°C, in which case it should be set to Max.
What is the SF/SC position on the control panel?
SF stands for "Super frost" and indicates fast freezing, while SC stands for "Super cool" and indicates fast cooling.
How do I change the direction of the door opening?
Tilt the appliance, unscrew the bottom hinge, disassemble as shown in Figure 3 of the manual, then reassemble the parts in the opposite turn, using the attached opposite hinge insert piece.
What should I do if the door seal does not rest well?
Remove the door seal and turn it by 180°.
How does the appliance temperature get set?
The appliance temperature is set by turning the button (B) on the control panel to the position between the Min and Max span.