Noise level. Groupe Brandt KGIT122FD

Add to My manuals
24 Pages

advertisement

Noise level. Groupe Brandt KGIT122FD | Manualzz

Noise level

The refrigerator – freezer appliances are cooled by the refrigeration system with a compressor (assisted by fan in certain models) whose operation may produce certain noise. The level of such noise depends upon the location, correct use and age of the appliance.

After starting the appliance,

the operation of the compressor

(the refrigerant fl ow) may be somewhat louder. This does not mean that something is wrong with the appliance, neither has it any in fl uence on the lifetime of the appliance. Gradually the noise is reduced and eventually subsides.

• Sometimes the appliance produces

unusual and stronger noise

which is rather unusual for the appliance. This noise is often the consequence of inadequate positioning of the appliance:

- The appliance should be placed and leveled fi rmly on solid

base.

- It should not touch the wall or adjacent kitchen units

standing next to it.

- Check whether the accessories in the interior of the

appliance are placed correctly in their positions; also check

the bottles, tins and other vessels that might touch each

other and rattle.

22

THE MANUFACTURER RESERVES THE RIGHT TO

ALTER THE SPECIFICATIONS WITH NO IMPACT TO THE

FUNCTIONAL OPERATION OF THE APPLIANCE.

23

COOLER 54 4* 197774/en (01-09)

advertisement

Related manuals

Frequently Answers and Questions

What is the recommended temperature setting for the appliance?
The recommended thermostat knob setting for most refrigerators is to the ECO position, unless the room temperature is lower than 16°C, in which case it should be set to Max.
What is the SF/SC position on the control panel?
SF stands for "Super frost" and indicates fast freezing, while SC stands for "Super cool" and indicates fast cooling.
How do I change the direction of the door opening?
Tilt the appliance, unscrew the bottom hinge, disassemble as shown in Figure 3 of the manual, then reassemble the parts in the opposite turn, using the attached opposite hinge insert piece.
What should I do if the door seal does not rest well?
Remove the door seal and turn it by 180°.
How does the appliance temperature get set?
The appliance temperature is set by turning the button (B) on the control panel to the position between the Min and Max span.