advertisement
■
Destination search
■
Search by address
3
4
Search by city
4
Search by street address
1 Press the “MAP” button on the Remote
Touch.
2
3
Remote Touch operation.
Select “Dest.”.
Select “Address”.
7
8
9
4
5
6
Select “City”.
Enter a city name and select “OK”.
Select the desired city name.
Enter a street name and select “OK”.
Select the desired street name.
Enter a house number and select
“OK”.
10
11
Select “Go”.
Select “OK”.
4
5
Select “Street Address”.
Enter a house number and select
“OK”.
9
10
11
6
7
8
Enter a street name and select “OK”.
Select the desired street name.
Enter a city name and select “OK”.
Select the desired city name.
Select “Go”.
Select “OK”.
36
37
■
Search by point of interest
3
1
Press the “MAP” button on the Remote
Touch.
2
3
Remote Touch operation.
Select “Dest.”.
Select “Point of Interest”.
Hands-free System For Cellular Phone
(with Navigation System)
■
Bluetooth
®
phone pairing
To use the hands-free system, it is necessary to register a Bluetooth
®
phone with the system.
Please refer to the cellular phone manufacturer’s user guide for pairing procedures, or go to http://www.lexus.com/MobileLink for more phone information.
3
1
2
Turn the Bluetooth
®
connection setting of your cellular phone on.
Press the “MENU” button on the
Remote Touch.
3
Remote Touch operation.
Select “Phone”.
4 4
Select “Yes” to register a phone.
5
7
5
6
When this screen is displayed, search for the device name displayed on this screen on the screen of your
Bluetooth
®
device.
Register the Bluetooth
®
device using your Bluetooth
®
device.
7
8
Check that a confirmation screen is displayed indicating pairing was successful.
Check that “Connected” is displayed and registration is complete.
■
Contact transfer
5
1 Press the “MENU” button on the
Remote Touch.
2
3
4
5
6
Remote Touch operation.
Select “Setup”.
Select “Phone”.
Select “Contact/Call History”.
Select the desired contact to add to the favorites list.
Check that a confirmation screen is displayed when the operation is complete.
Contact transfer may not be possible depending on phone model.
38
39
■
Calling by name
You can call by giving a name registered in the contact list. For details, refer to the
“NAVIGATION SYSTEM OWNER’S MANUAL”.
1 1
2
Press the talk switch.
Say “Call <contacts> <phone types>”.
In the same manner as it is displayed on the screen, “Call <contacts> <phone types>”, after saying “Call a contact” say the name, or the name and type of phone, of a contact.
For example: “Call a contact”, “John
Smith” or “Call a contact”, “Mary
Davis”, “Mobile”
Talk switch: Pressing this switch turns the voice command system on. Say a command after the beep.
■
Receiving a call
When a call is received, call screen is displayed with a sound.
Call screen can also be displayed on the side display.
Press on the steering wheel to talk on the phone.
To refuse to receive the call, press on the steering wheel.
■
Steering switches
2
1
3
4
Increases/decreases volume
Sending/Receiving/Phone top screen display
End call/Refuse call
Start the voice command system
Audio System (with Navigation System)
■
Audio control screen
Follow the procedure below to display the audio control screen.
2
1 Press the “MENU” button on the
Remote Touch.
2
Remote Touch operation.
The “Menu” screen will be displayed.
Using the Remote Touch, select
“Radio” or “Media”.
■
Remote control (steering wheel audio switches)
Some audio features can be controlled using the switches on the steering wheel.
2
1
3
Adjust volume
Radio mode: Select a radio station/ channel
Audio CD mode: Select a track
MP3/WMA/AAC disc mode: Select a file
DVD mode: Select a chapter iPod mode: Select a track/file
Select audio source
Play/Pause
Turn mute on/off
40
41
■
Basic operation
1
2
3
4
5
Display the audio source selection screen
Display the sound setting screen
Adjust volume
Turn the audio system on/off
Select a radio/media mode
Play/Pause
Turn mute on/off
■
Radio
1
5
6
2
3
4
7
Display the cache radio operation buttons
Display the radio preset buttons
Scan for receivable stations/channels
Select to store artist and song title information
Display a list of receivable stations
Select a preset station/channel
Seek for a station/channel
Step up/down frequencies/channels
Move up/down the list
■
Entering station/channel presets
1
2
Select the desired station/channel by using the tune, the seek or the scan function.
Select “Presets”.
3
Select one of the screen buttons and hold it until a beep is heard, indicating that the station/channel has been set.
■
DVD player/CD player
■
Playing an audio CD
6
7
4
5
8
2
3
9
1
Select a track
Rewind
Play/Pause
Select a track
Fast forward
Set repeat playback
Set random playback
Display a track list
Eject a disc
Select a track
Fast forward/rewind
Select a track
Move up/down the list
■
Playing a CD with MP3/WMA/AAC files
2
1
7
8
5
6
9
3
4
10
Select a folder
Select a file
Rewind
Play/Pause
Select a file
Fast forward
Set repeat playback
Set random playback
Display a folder list
Eject a disc
Select a file
Fast forward/rewind
Select a file
Move up/down the list
42
43
■
Playing a DVD
■
Operating an iPod
2
1
6
7
3
4
5
8
Display full screen video
Select a chapter
Rewind
Stop the video screen
Play/Pause
Select a chapter
Fast forward/Slow forward
Eject a disc
Select a chapter
Fast forward/rewind
Select a chapter
1
2
3
6
7
4
5
8
Select a track
Rewind
Play/Pause
Select a track
Fast forward
Set repeat playback
Set random playback
Display the play mode selection screen
Select a track
Fast forward/rewind
Select a track
Move up/down the list
Lexus Display Audio Controller (with
Lexus Display Audio)
By using the Lexus Display Audio controller, you can control the audio system, handsfree system, etc.
1
2
3
4
Display the “Source” screen or audio top screen
Display the “Menu” screen (
Back button
Display the previous screen
Turn or move the controller to select a function and number.
Move the controller to display the left or right side of the screen.
Push the controller to enter the selected function and number.
44
■
“Menu” screen
To display the “Menu” screen, press the “MENU” button on the Lexus Display Audio controller.
45
“Radio”
“Media”
“Climate”
“Phone”
“Connected Navi”*
“Info”
“Setup”
“Display”
Button
Function
Display the radio top screen
Display the media top screen
Display the air conditioning control screen ( →
Display the phone top screen
If a turn-by-turn navigation application has been downloaded to a connected phone, the application will be displayed and can be used.
Display the “Information” screen
Display the “Setup” screen
Display the display settings screen
*
: Available in the 48 states, D.C. and Alaska
■
Screen for display settings
Go to “Display”: “MENU” button
→
“Display”
2
1
3
4
Turn off screen.
Adjust screen quality.
Adjust screen quality of the rear view monitor camera.
Change to day mode.
Hands-Free System For Cellular Phone
(with Lexus Display Audio)
■
How to register a Bluetooth
®
device
1
2
Turn the Bluetooth
®
connection setting of your device set to on.
Go to “Bluetooth
*
Setup”: “MENU” button
→
“Setup”
→
“Bluetooth
*
”
3
Move the controller to the left and then select “Add Device”.
4
When this screen is displayed, search for the device name displayed on this screen on your Bluetooth
®
device.
5
Register the Bluetooth
®
device using your Bluetooth
®
device.
*
: Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
■
Registering favorites
You can register the desired contact from the phonebook. Up to 15 contacts per phone can be registered.
1
2
Go to “Add Favorite”: “MENU” button
→
“Setup”
→
“Phone”
→
“Contact/Call History”
→
“Add Favorite”
Choose the contact to register.
■
Dialing
1
2
3
Go to “Dial Pad”: “MENU” button
→
“Phone”
→
“Dial Pad”
Input a phone number.
Press the off-hook switch on the steering wheel or select .
■
Dialing from the phonebook
1
2
3
Go to “Contacts”: “MENU” button → “Phone” → “Contacts”
Choose the desired contact to call from the list.
Choose the number and then press the off-hook switch on the steering wheel or press the controller.
46
47
■
When the phonebook is empty
You can transfer the phone numbers in a Bluetooth
®
phone to the system.
Operation methods differ between PBAP (Phone Book Access Profile) compatible and
PBAP incompatible Bluetooth
®
phones. If the cellular phone does not support either PBAP or OPP (Object Push Profile) service, you cannot transfer contacts.
1
Press the off-hook switch on the steering wheel.
If the phonebook is empty, a message will be displayed.
For a PBAP compatible Bluetooth
®
phone and “Automatic Transfer” is off
2 To enable automatic transfer of new contacts from a cellular phone every time it is connected, select “Always”.
Select “Once” if you want to transfer new contacts from a cellular phone.
For a PBAP incompatible and OPP compatible Bluetooth
®
phone
2
Select “Transfer” and operate your cellular phone to transfer new contacts from a cellular phone.
Select “Add” if you want to add a new contact manually.
■
Dialing from favorites
You can make a call using numbers registered in the favorites.
1
2
3
Go to “Favorites”: “MENU” button → “Phone” → “Favorites”
Choose the desired contact to call from the list.
Choose the number and then press the off-hook switch on the steering wheel or press the controller.
■
To answer the phone
Press the off-hook switch on the steering wheel or select .
■
Operating a phone using the steering wheel switches
4
1
2
3
Volume switch
During an incoming call: Adjusts the ring tone volume
During speaking on the phone: Adjusts in call volume
The voice guidance volume cannot be adjusted using this button.
Off-hook switch
• Start call
• Receiving
• Phone top screen display
On-hook switch
• End call
• Refuse call
Talk switch
Press: Turns the voice command system on
Press and hold: Turns the voice command system off
48
49
Audio System (with Lexus Display Audio)
■
Lexus Display Audio operation buttons
2
1
3
6
7
4
5
8
Eject a disc.
Select a radio station band, track or file.
Except radio and A/V mode: Pause or resume playing a track.
Radio and A/V mode: Turn mute on/off.
Seek up or down for a radio station, or to access a desired track or file.
Disc slot
Display the media top screen.
Display the radio top screen.
Press to turn the audio system on/off, and turn to adjust the volume.
■
Using the steering wheel switches to change audio sources
Press the “MODE” switch when the audio system is turned on. The audio source changes each time the “MODE” switch is pressed.
■
Audio menu screen
To display the audio menu screen, move the controller to the left while on an audio top screen.
Radio mode
Button
“SCAN”
“SEEK”
“Tag”
“Multicast”
“Traffic”
“HD Radio”
“Radio Settings”
“Sound Settings”
Function
Scans for receivable stations
Seeks a station of the nearest frequency (stops when a station is found)
Captures the song title and artist name information for potential purchase (when the “HD)” indicator on the selected station is appears)
Changes the channel of HD Radio (HD2, HD3,
HD4 where applicable)
Seeks a station of the traffic announcement
Selects to set the station list shows of HD radio on/ off
Changes radio settings
Changes sound settings
Target radio mode
AM, FM
AM, FM
FM
FM
FM
AM, FM
All mode
All mode
50
Media mode
51
Button
“Play”
“Pause”
“Track Up”
“Track Down”
“File Up”
“File Down”
“Folder Up”
“Folder Down”
“Fast Forward”
“Rewind”
Selects and hold: Fast-forward or rewind a track/file
Function
Plays or pauses a track/file
Selects a track/file
Selects a folder/album
“Repeat” Selects a repeat mode
“Random”
“Shuffle”
“Full Screen”
“Connect”
Selects a random/shuffle play mode
Selects a full screen mode
Connects a Bluetooth
®
device
“Cover Art Settings”
Changes the cover art settings
“iPod Settings”
“USB Settings”
Changes iPod settings
Changes USB settings
“External Video
Settings”
Changes A/V settings
“Sound Settings” Changes sound settings
Target audio source
All media (except
A/V)
All media (except
A/V)
MP3/WMA/AAC disc, USB
All media (except
A/V)
All media (except
A/V)
All media (except
A/V) iPod, A/V
Bluetooth
®
CD, MP3/WMA/
AAC disc iPod
USB
A/V
All media
■
Operating the audio system using the steering wheel switches
1
2
3
Volume switch
• Increases/decreases volume
• Press and hold: Continuously increases/decreases volume
Radio mode:
• Press: Select a radio station
• Press and hold: Seek up/down
CD, MP3/WMA/AAC disc,
Bluetooth
®
, iPod or USB mode:
• Press: Select a track/file/video
• Press and hold: Continuously tracks/ files/videos up/down. (MP3/WMA/
AAC disc, iPod or USB)
“MODE” switch
• Turns the power on, selects audio source
• Press and hold this switch to mute or pause the current operation. To cancel the mute or pause, press and hold.
Portable Audio Device Ports
This port can be used to connect a portable audio device and listen to it through the vehicle’s speakers.
Press the console box knob, open the cover and connect the portable audio device.
52
53
Air Conditioning System
■
Adjusting the temperature
To adjust the temperature setting, touch and slide your finger up or down on the sensor.
The temperature setting can also be adjusted by touching on the sensor.
When the temperature setting is changed, a buzzer sounds.
■
Air conditioning control screen
With a Lexus Display Audio
With a navigation system
1
4
5
2
3
6
7
8
9
Adjust the left-hand side temperature setting
Adjust the fan speed setting
Select to set auto mode on/off
Select to set eco mode on/off
Select to set cooling and dehumidification function on/off
Adjust the temperature for driver and passenger seats separately (“DUAL” mode)
Display the option control screen
Select the air flow mode
Adjust the right-hand side temperature setting
1
2
3
4
5
6
7
8
9
Adjust the left-hand side temperature setting
Adjust the fan speed setting
Select the air flow mode
Adjust the right-hand side temperature setting
Display the option control screen
Select to set automatic mode on/off
Select to set cooling and dehumidification function on/off
Adjust the temperature for driver and passenger seats separately (“DUAL” mode)
Select to set eco mode on/off
54
55
■
Option control screen
Select on the air conditioning control screen to display the option control screen. The functions can be switched on and off.
With a Lexus Display Audio With a navigation system
1
Removing pollen from the air (Micro dust and pollen filter)
■
Side display operation screen (vehicles with a navigation system)
5
6
3
4
2
1
7
Select the air flow mode
Adjust the left-hand side temperature setting
Adjust the fan speed setting
Adjust the right-hand side temperature setting
Select to set auto mode on/off
Select to set cooling and dehumidification function on/off
Adjust the temperature for driver and passenger seats separately (“DUAL” mode)
■
Using automatic mode
Press the automatic mode button to turn on the airflow and adjust the temperature setting.
■
Adjusting the temperature for driver and passenger seats separately
(“DUAL” mode)
In dual mode, driver and passenger side temperature settings can be adjusted separately.
To turn on the “DUAL” mode, perform any of the following procedures:
●
Press or select “DUAL” on the air conditioning control screen.
● Select “DUAL” on the side display operation screen. (vehicles with a navigation system)
● Adjust the passenger’s side temperature setting.
The indicator comes on when the “DUAL” mode is on.
While in “DUAL” mode, the temperature of the rear air outlets is set at the right-hand side temperature setting.
56
57
Seat Heaters (if equipped)/
Seat Ventilators (if equipped)
■
Seat heaters
Type A Type B
Each time the switch is pressed, the intensity of the seat heater changes and the level indicator lights (amber) light as follows:
Hi (3 segments lit) → Mid (2 segments lit)
→ Lo (1 segment lit) → Off
■
Seat ventilators
Each time the switch is pressed, the intensity of the seat ventilator changes and the level indicator lights (green) light as follows:
Hi (3 segments lit) → Mid (2 segments lit)
→ Lo (1 segment lit) → Off
■ Seat heater timer control
To enable seat heater timer control, press and hold the driver and front passenger seat heater switches at the same time until a buzzer sounds once. If a seat heater is turned on while seat heater timer control is enabled, the intensity of the seat heater will automatically change from Hi → Mid → Lo.
The timing of the change in seat heater intensity differs depending on the temperature inside the cabin, etc. when the seat heater is operating.
To disable seat heater timer control, press and hold the driver and front passenger seat heater switches at the same time until a buzzer sounds twice.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement