SETUP PROCEDURE. Olivetti D-COPIA 150, d-Copia 120/150

Add to my manuals
78 Pages

advertisement

SETUP PROCEDURE. Olivetti D-COPIA 150, d-Copia 120/150 | Manualzz

2

SETTING UP THE UNIT

Follow the installation procedure below to use the unit properly.

If the unit does not function properly during setup or use, or if a function cannot be used, see "TROUBLESHOOTING THE UNIT" (p.59).

SETUP PROCEDURE

When using the unit for the first time, setup the unit following the procedure shown below.

1 Open the package, and make sure that all the accessories are supplied with the unit. (p.8)

2 Remove the protective materials. (p.9)

3 Install the TD cartridge. (p.10)

4 Load the paper in the paper tray (p.15)

5 Plug the other end of the power cord into the nearest outlet. (p.12)

6 Install the software.*

1

(p.19)

7 Connect the interface cable*

1

(p.45) and turn on the unit. (p.12)

8 Now, you can copy (p.46), print (p.32), or scan (p.34) your document.

2

*

1

If you are only using the unit for copying, skip this step.

7

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals