INSTALLING THE TD CARTRIDGE. Olivetti D-COPIA 150, d-Copia 120/150

Add to my manuals
78 Pages

advertisement

INSTALLING THE TD CARTRIDGE. Olivetti D-COPIA 150, d-Copia 120/150 | Manualzz

10

INSTALLING THE TD CARTRIDGE

1

Open the side cover.

2

Remove the adhesive tape from the front cover and remove the two protective pins from the fusing unit by pulling the strings upward one at a time.

Adhesive tape

3

Push gently on both sides of the front cover to open the cover.

Protective pins

4

Remove the TD cartridge from the bag. Remove the protective paper. Hold the cartridge on both sides and shake it horizontally four or five times. Hold the tab of the protective cover and pull the tab to your side to remove the cover.

4 or 5 times

5

Gently insert the TD cartridge until it locks in place while pushing the lock release button.

6

Close the front cover and then the side cover by pressing the round projections near the side cover open button. The indicator ( ) will go out and the start ( ) indicator will light up.

When closing the covers, be sure to close the front cover securely and then close the side cover. If the covers are closed in the wrong order, the covers may be damaged.

2

11

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals