DESCRIPTION OF SPECIAL FUNCTIONS. Olivetti D-COPIA 150, d-Copia 120/150Add to my manuals
This chapter describes the special functions of this unit. Use these functions as needed.
DESCRIPTION OF SPECIAL FUNCTIONS
Toner save mode (page 52)
Reduces toner consumption by approximately 10%.
Power save modes (page 53)
The unit has two power save modes of operation: preheat mode and auto power shut-off mode.
When the unit enters the preheat mode, the power save ( ) indicator will light up and other indicators will remain on or off as before. In this condition, the fuser in the unit is maintained at a lower heat level, thereby saving power. To copy from the preheat mode, make desired copier selections and press the start ( ) key using the normal copying procedure.
Auto power shut-off mode
When the unit enters the auto power shut-off mode, the power save ( ) indicator will light up and other indicators will go out. The auto power shut-off mode saves more power than the preheat mode but requires a longer time before starting copying. To copy from the auto power shut-off mode, press the start ( ) key.
Then make desired copier selections and press the start ( ) key using the normal copying procedure.
Auto clear (page 53)
The unit returns to the initial settings a preset amount of time after the end of copy, or scanner operation. This preset amount of time (auto clear time) can be changed.
Stream feeding mode (page 53)
For description of the stream feeding mode, see "Stream feeding mode" (p.48).
Resolution of AUTO & MANUAL mode (page 53)
You can set the copy resolution used for AUTO and MANUAL ( mode.
TONER SAVE MODE
Press the exposure mode selector key to select the manual ( ) mode.
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project