DISPLAYING TOTAL NUMBER OF COPIES. Olivetti D-COPIA 150, d-Copia 120/150

Add to my manuals
78 Pages

advertisement

DISPLAYING TOTAL NUMBER OF COPIES. Olivetti D-COPIA 150, d-Copia 120/150 | Manualzz

54

Program

No.

1

Mode

Auto clear time

0 OFF, 1

Parameters

10sec., 2 30sec.

2

3

4

5

6

Preheat mode

Auto power shut- off timer

Stream feeding mode

Auto power shut- off mode

Resolution of AUTO

& MANUAL mode

*0 30sec., 1 60sec., 2 90sec.

0 2min., *1 5min., 2 15min.

3 30min. 4 60 min. 5 120min.

*0 300dpi, 1 600dpi

* Factory default settings are indicated with an asterisk (*).

5

Press the start ( ) key. The right-hand number in the display will be steadily lit and the entered value will be stored.

To change the setting or to set another mode, press the clear

( ) key. The unit will return to step 2.

6

Press the light ( ) or dark ( ) key to return to the normal copy mode.

DISPLAYING TOTAL NUMBER OF COPIES

Use the following procedure to display the total number of copies.

Press and hold down the clear ( ) key for approximately 5 seconds.

The total number of copies will appear in two steps, each with three digits.

Example: Total number of copies is 1,234.

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals