AWM965
Packing List
AWM965
20-PIN POWER/A-B SPEAKER MATING PIGTAIL
REMOTE CONTROL
WITH BATTERY
Installation
It’s a good idea to read all of the instructions before beginning the installation. We recommend having your JENSEN AWM965 installed by a reputable installation shop.
Selecting the Mounting Location
•
•
•
•
Select a mounting location, taking care to avoid the following:
Places exposed to heat-radiating appliances such as electric heaters
Adjacent to other equipment that radiates heat
Poorly-ventilated or dusty places
Moist or humid locations
Preparing the Opening
Use the mounting hole diagram (below) to measure and cut a mounting hole, then mount the unit using four M3x20mm screws.
AUX AUDIO /
VIDEO CABLE
3
NOTE: Before cutting the mounting hole, make sure the area behind the mounting location is clear of wires, fuel and vacuum or brake lines.
Mounting the Radio
Route power, speaker and antenna cables through the hole, and connect them to the unit as outlined in the wiring diagram. After ensuring correct connections, test operation.
