Activate Pumps. Sundance Spas 680™ Series

680 SERIES

9.2 Activate Pumps

The

JETS 1

button activates the jets pump 1. The first press activates in low speed, the second press activates high speed, and the third press shuts the pump off. The

JETS 2

button (if equipped) activates jets pump 2 which only operates in high speed. When manually activated, both pumps automatically turn off in 20 minutes.

1 2

9.3 SunGlow™ Light Operation (Denali and Tacoma Models)

The spa light offers 6 constant color variations and a unique random mode for enhanced spa enjoyment. Press the Light button once to turn the spa light on in Random mode, then repeatedly press the button to turn the light off or to select one of 6 constant colors as illustrated below.

Random OFF Red OFF Green

OFF Blue

Off Teal OFF Violet OFF Orange OFF

You must press the LIGHT button within 5 seconds between each “off” or “color” selection to prevent it from resetting. Pressing the button after 5 seconds restarts the sequence in Random mode. This mode automatically changes the light color every 8 to 20 seconds.

Note:

Any time the spa light is manually turned on, it will automatically turn off after approximately 1 hour. If you desire more light at this time, simply turn the light back on.

Page 27