(Edison®, Hartford, Hawthorne, and Peyton Models). Sundance Spas 680™ Series
Add to My manuals138 Pages
advertisement
680 SERIES
9.4 Multi-Colored LED Light System Operation (Edison®,
Hartford, Hawthorne, and Peyton Models)
The multi-colored LED spa light offers seven constant color variations and three unique random modes for enhanced spa enjoyment. Press the light button once to activate the light modes, then continue pressing the button to either turn the light off or to select random fade, one of seven constant colors, random solid color mode or strobe mode as illustrated.
Note:
When the light is off and turned on, it will turn on to the next color in the sequence from the last color used.
Press
Once
= RANDOM FADE
= off
= NEAR WHITE
= off
= LIGHT BLUE
= off
= VIOLET
= off
= DARK BLUE
= off
= LIME GREEN
= off
= DARK GREEN
= off
= RED
= off
= RANDOM SOLID
= off
= STROBE
= off
Light Operation Tips:
Any time the spa light is manually activated, it will remain on for 1 hour then automatically shut off.
Lights display different solid color every 5-6 seconds
Lights flash “strobe” in white color
Page 28
advertisement
Related manuals
advertisement
Table of contents
- 7 Important Spa Owner Information
- 7 FCC Notice
- 8 Important Safety Instructions for all Spa Owners
- 12 Entrapment Risk
- 13 Hyperthermia
- 14 Important CSA Safety Instructions (Canada only)
- 14 General Electrical Safety Instructions
- 15 Choosing A Location
- 16 Outdoor Location
- 17 Indoor Location
- 18 Power Requirements
- 18 North American 60 Hz Power Options
- 19 Export 50 Hz Power Options
- 20 Electrical Wiring Instructions
- 24 Spa Fill Up Procedure
- 29 Control Functions
- 29 Control Panel
- 30 General Spa Features And Controls
- 31 and Peyton Models)
- 32 Operating Instructions
- 32 Setting Water Temperature
- 33 Activate Pumps
- 33 SunGlow™ Light Operation (Denali and Tacoma Models)
- 34 (Edison®, Hartford, Hawthorne, and Peyton Models)
- 35 Adjusting Individual Jet Flow
- 35 Selecting Desired Massage Action
- 35 Air Controls
- 35 Optional BLUEWAVE™ Spa Stereo System
- 36 10.0 Automatic Filtration Cycles
- 36 Standard Filtration/Heating Modes (F1-F3)
- 36 Economy Filtration/Heating Modes (F4-F6)
- 36 Lock Modes (L1-L3)
- 36 Selecting The Filtration/Heating Mode
- 37 Filtration Modes
- 38 Water Purification System
- 40 11.0 Spa Maintenance
- 40 Cleaning The Filter
- 41 Draining and Refilling
- 42 Pillow Care (All Models Except Denali)
- 43 Cleaning The Spa Interior
- 43 Maintaining The Cover
- 44 Maintaining The Synthetic Cabinet
- 44 11.7 Winterizing
- 45 Restarting Your Spa in Cold Weather
- 45 12.0 Water Quality Maintenance
- 46 pH Control
- 46 Sanitizing
- 47 ® Water Purification System
- 47 Quartz Tube Maintenance
- 50 13.0 Error Conditions/Error Messages
- 50 Panel Displays SN
- 50 Panel Flashes FL1 or FL
- 51 Panel Displays COL
- 51 Panel Displays ICE
- 51 Panel Displays OH
- 51 Panel Displays
- 51 Panel Displays BLB
- 52 14.0 Troubleshooting Procedures
- 52 None of the Components Operate (e.g. Pump, Light)
- 52 Pump Does Not Operate but Light Does
- 52 Poor Jet Action
- 52 Water is Too Hot
- 52 No Heat
- 54 Circuit Diagram (60 Hz)
- 55 and Peyton Circuit Diagram (60 Hz)
- 56 17.0 Export Denali/Tacoma Circuit Diagram (50 Hz)
- 57 Peyton Circuit Diagram (50 Hz)
- 58 19.0 Optional BLUEWAVE™ Spa Stereo System
- 59 Pairing the Remote and Stereo
- 59 Audio Settings
- 61 Wireless Remote Control Functions
- 62 Electronic Device Connections and Functions
- 65 Wireless Remote Battery Replacement Procedure
- 66 BLUEWAVE Spa Stereo System Specifications
- 66 Stereo Cautions