advertisement
680 SERIES
19.0 Optional BLUEWAVE™ Spa Stereo System
To start enjoying your new stereo receiver, please read the following operation instructions in their entirety.
3.5 mm cable
30-pin
Connector
2
6 7
1
AUX
USB
3 4
5
USB connector
1.
Media Locker Handle
Slide the handle to lock and unlock the protective door.
2.
Power Button
Press power button once to turn “ON” stereo system. Press a second time to place the stereo in “Standby” mode and the red light will remain illuminated.
3.
Auxiliary Input Jack Connector
Allows you to connect an auxiliary device by using a 3.5 mm cable.
4.
Universal Serial Bus (USB) Device Connector
Allows you to connect your device via a USB port and a USB cable compatible with your device. Apple 30-pin cable supplied with
BLUEWAVE stereo.
5.
Auxiliary Device Holding Base
The removable base securely holds the Auxiliary device, such as an iPod/MP3/iPhone, in place. It can be removed for larger devices.
6.
3.5 mm Cable
Use this cable to connect your Auxiliary or MP3 device to the stereo via the “AUX” connection.
7.
Apple 30-pin to USB Cable
Use this cable to connect your compatible iPod, iPhone or MP3 device to the stereo via the “USB” connection.
Page 52
advertisement