advertisement
680 SERIES
9.
Stereo Setting:
Press the Audio button 9 times to access the Stereo setting. The LCD display will change to
“STEREO,” Figure M. Press the Up button to select either
Stereo or Mono.
Figure M
19.3 Wireless Remote Control Functions
A wireless radio frequency (RF) remote control is supplied on all spas with the optional audio system. This remote provides control of the radio and over some media device functions.
AUDIO MODE
A.
External Media Device Playback
The supplied remote control provides no control over external operations.
1
DIR -
2 3
REPEAT
Auxiliary player operations except for volume control and source selection. The Auxiliary player performs all external playback
DIR + RANDOM
Button
AUDIO
MODE
Operation
Power Button: Press once to turn remote “ON” (remote LCD display will read “No Link”; Press a second time to turn stereo “ON” (remote
LCD display will read “Welcome”; Press a third time to place the stereo in “Standby” mode.
Audio Button: Allows access to most of the stereo sound functions.
Press continuously to scroll through the following settings: Bas-Tre-
Bal-Fad-DSP-Area-Loud-DX-Stereo.
Mode Button: Press continuously to switch between “RADIO,”
“USB,” and “AUX IN” modes. “BT AUDIO” appears when a
Bluetooth device in paired with the stereo.
Volume Up Button: Used to increase volume between 0 to 30.
Volume Down Button: Used to decrease volume between 30 to 0.
Button Device Mode (USB)
Play/Pause Button: Press to pause track, press again to resume playing
Track Down Button: Press to rewind tracks
Track Up Button: Press to move forward tracks
1
DIR -
Press the button to change music folders
Radio Mode
Mute Button: Press to mute sound, press again to reactivate sound
Seek Down Button: Seeks down for stations
Seek Forward Button: Seeks forward for stations
Preset 1: Press to access a preset station
Page 55
advertisement