DEHUMIDIFIER USE. Roper AD70USR0, AD50USR - t Electronic Dehumidifier, AD75UST0, RD50CBM4, AD40DSR1, AD70USS1, RD50CBM3, AD40DSR0, AD70USS0, Dehumidifier

Add to My manuals
16 Pages

advertisement

DEHUMIDIFIER USE. Roper AD70USR0, AD50USR - t Electronic Dehumidifier, AD75UST0, RD50CBM4, AD40DSR1, AD70USS1, RD50CBM3, AD40DSR0, AD70USS0, Dehumidifier | Manualzz

4

DEHUMIDIFIER USE

Setting the Controls (Control types 1 and

2 only)

Starting/Stopping the Dehumidifier

NOTE: Before turning dehumidifier on, be sure that the bucket is properly inserted into dehumidifier and that the bucket is empty.

Control Type 1

NOTE: Minimum operating temperature is 65ºF (18ºC).

A

B

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

A. Light glows, indicating the bucket is full or is not in correct position.

B. Adjusts amount of moisture removed from room.

Control Type 2

NOTE: Minimum operating temperature is 55ºF (13ºC).

A B

C

A. Light glows, indicating the bucket is full or is not in correct position.

B. Adjusts amount of moisture removed from room.

C. Selects fan speed.

1. Plug into a grounded 3 prong outlet.

2. To turn on dehumidifier, turn MOISTURE CONTROL clockwise.

NOTE: If the Empty or Adjust Bucket light comes on, the dehumidifier will not operate. Empty or adjust bucket.

3. To turn off dehumidifier, turn MOISTURE CONTROL counterclockwise to OFF.

Empty or Adjust Bucket Light

If this light is on, the dehumidifier is not running. This light indicates that you need to check:

If the bucket is full, empty and replace bucket.

If the bucket is not in position, remove the bucket and replace. Make sure the bucket fits all the way into the dehumidifier and the light is off, or dehumidifier will not run.

Fan Speed (Control Type 2 models only)

The Fan Speed controls fan operation.

High—for faster moisture removal

Low—for slower moisture removal

Moisture Control

The Moisture Control controls the amount of moisture in the room. Turn the control knob clockwise for more drying. Turn control knob counterclockwise for less drying. Turn control knob to “dry” to maintain average humidity conditions.

NOTE: For the first few days of use, turn the MOISTURE

CONTROL clockwise to CONTINUOUS RUN to remove extra moisture from the furnishings as well as the room air.

advertisement

Related manuals