Setting the Controls (Control type 3 only). Roper AD70USR0, AD50USR - t Electronic Dehumidifier, AD75UST0, RD50CBM4, AD40DSR1, AD70USS1, RD50CBM3, AD40DSR0, AD70USS0, Dehumidifier

Add to My manuals
16 Pages

advertisement

Setting the Controls (Control type 3 only). Roper AD70USR0, AD50USR - t Electronic Dehumidifier, AD75UST0, RD50CBM4, AD40DSR1, AD70USS1, RD50CBM3, AD40DSR0, AD70USS0, Dehumidifier | Manualzz

Setting the Controls (Control type 3 only)

Starting/Stopping the Dehumidifier

NOTES:

Before turning dehumidifier on, be sure that the bucket is properly inserted into dehumidifier and that the bucket is empty.

Each time you unplug the dehumidifier or power is interrupted, the control will return to your previous settings.

Minimum operating temperature is 44ºF (7ºC).

WARNING

A

B

C

A. Light glows, indicating the bucket is full or is not in correct position.

B. Selects mode.

C. Adjusts amount of moisture removed from room.

If the bucket is not in position, remove the bucket and replace. Make sure the bucket fits all the way into the dehumidifier and the light is off, or dehumidifier will not run.

Mode

1. Press MODE to select fan speed.

2. Choose High Fan, Low Fan, Continuous Run or Auto Dry.

High Fan—Will reach the desired moisture level faster.

Press the right arrow button to increase the amount of moisture removed. The indicator light will change according to the number of times you press the right arrow button.

Low Fan—Will reach the desired moisture level slower with lower sound level.

Press the left arrow button to decrease the amount of moisture removed. The indicator light will change according to the number of times you press the left arrow button.

Continuous Run—Will run continuously regardless of humidity level.

You cannot select the amount of moisture you want removed.

The dehumidifier will turn off only if the bucket is full or removed.

NOTE: The Deicer will turn the compressor off if a low temperature condition exists. Pressing the left or right arrow buttons will not increase or decrease the amount of moisture removed.

Auto Dry—Will provide the maximum humidity control by automatically adjusting the fan speed and/or turning the dehumidifier on and off to maintain humidity setting.

Press the left and right arrow buttons to set the amount of moisture you want removed.

Remove and Empty Bucket

Remove Bucket to Empty Water

WARNING

Sickness Hazard

Do not drink water collected in water bucket.

Doing so can result in sickness.

1. Use side handles to lift bucket. Pull bucket forward and remove.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

1. Plug into a grounded 3 prong outlet.

2. Press ON/OFF to turn on dehumidifier.

NOTE: If the Empty or Adjust Bucket light comes on, the dehumidifier will not operate. Empty or adjust bucket.

3. Press ON/OFF to turn off dehumidifier.

NOTE: The dehumidifier will retain your last settings.

Empty or Adjust Bucket Light

If this light is on, the dehumidifier is not running. This light indicates that you need to check:

If the bucket is full, empty and replace bucket.

5

advertisement

Related manuals