advertisement
Panel Description
AT-OMNI-324
Front
DC 24V UTILITY PAIRING
1
LAN
2 3
Rear
6 7 8 9
AT-OMNI-324
PWR
LINK
HOST
SIGNAL
O
MNI
S
TREAM TM
DC 24V UTILITY PAIRING LAN
4 5
1 USB Device Ports
Connect up to four USB devices using these ports.
O
MNI
S
TREAM TM
2 PWR
This LED indicator glows solid green when the unit is powered.
PWR
LINK
HOST
SIGNAL
3 HOST
This LED indicator glows green when a USB host device is connected to the AT-OMNI-311 (not included). Refer
for more information.
4 LINK
This LED indicator is solid green when a solid connection between this unit and the transmitter has been established. Refer to
for more information.
5 SIGNAL
This LED indicator monitors data transmission between this unit and the receiver. The LED will blink
intermittently whether or not a USB device is connected. Refer to LED Indicators (page 12)
for more information.
6 DC 24V
Connect the included power supply to this power receptacle.
7 UTILITY
This port is for factory programming.
8 PAIRING
Press this button to begin the pairing process.
9 LAN
Connect an Ethernet cable from this port to the Local Area Network (LAN).
AT-OMNI-324 9
advertisement