advertisement
Panel Description
IP TO ANALOG AUDIO BRIDGE
O
MNI
S
TREAM
5
+
-
+
-
7 9
+
-
+
-
11 13
1
1 2
2
8 10 ETHERNET 4 6 12 14
1 2
1. ETHERNET
Connect one port to an Ethernet switch for audio streams and control and one port to another AT-
OMNI-238 for up to 8 cascades.
2. LINE OUT
Connect to an audio DSP, amplifier, or other audio players/distribution devices.
AT-OMNI-238
15
!
To prevent shorts or damage, ensure no exposed wires touch !
Balanced:
Connect audio wires as: Positive (+), Negative (-), and Ground ( )
+ -
16
Unbalanced:
Connect audio wires as: Positive (+) and Ground ( )
+ DC 24V
3
3. DC 24V
Connect included power supply from an outlet to this port.
IMPORTANT:
Do not connect both Ethernet interfaces to the same network switch. By default, the
Network Interface Controller (NIC) operates in switched mode.
AT-OMNI-238 9
advertisement