- Sports & recreation
- Camping, tourism & outdoor
- Above ground pools
- Above ground pool accessories
- Cal Spas
- Portable Spa
- Owner's manual
- 60 Pages
Pre-Delivery Checklist. Cal Spas Portable Spa
advertisement
Assistant Bot
Need help? Our chatbot has already read the manual and is ready to assist you. Feel free to ask any questions about the device, but providing details will make the conversation more productive.
2
Preparing for Your New Portable Spa
Pre-Delivery Checklist
Most cities and counties require permits for exterior construction and electrical circuits. In addition, some communities have codes requiring residential barriers such as fencing and/or self-closing gates on property to prevent unsupervised access to the property by children. Your dealer can provide information on which permits may be required and how to obtain them prior to the delivery of your spa.
Before Delivery
Plan your delivery route
Choose a suitable location for the spa
Lay a 5 - 8 cm concrete slab
Install dedicated electrical supply
After Delivery
Place spa on slab
Connect electrical components
Planning the Best Location
Safety First
Do not place your spa within 10 feet (3 m) of overhead power lines.
Provide a View with Your Spa
Consider How You Will Use Your Spa
How you intend to use your spa will help you determine where you should position it. For example, will you use your spa for recreational or therapeutic purposes? If your spa is mainly used for family recreation, be sure to leave plenty of room around it for activity. If you will use it for relaxation and therapy, you will probably want to create a specific mood around it.
Think about the direction you will be facing when sitting in your spa. Do you have a special landscaped area in your yard that you find enjoyable? Perhaps there is an area that catches a soothing breeze during the day or a lovely sunset in the evening.
Keep Your Spa Clean
In planning your spa’s location, consider a location where the path to and from the house can be kept clean and free of debris.
Prevent dirt and contaminants from being tracked into your spa by placing a foot mat at the spa’s entrance where the bathers can clean their feet before entering your spa.
Plan for Your Environment
If you live in a region where it snows in the winter or rains frequently, place the spa near a house entry. By doing this, you will have a place to change clothes and not be uncomfortable.
Consider Your Privacy
In a cold-weather climate, bare trees won’t provide much privacy. Think of your spa’s surroundings during all seasons to determine your best privacy options. Consider the view of your neighbors as well when you plan the location of your spa.
Allow for Service Access
Make sure the spa is positioned so that access to the equipment compartment and all side panels will not be blocked.
Many people choose to install a decorative structure around their spa. If you are installing your spa with any type of structure on the outside, such as a gazebo, remember to allow access for service. It is always best to design special installations so that the spa can still be moved, or lifted off the ground.
www.calspas.com
2018 Portable Spa
LTR20181000, Rev. O
advertisement
Related manuals
advertisement
Table of contents
- 3 Important Safety Instructions
- 4 Pre-Delivery Checklist
- 4 Planning the Best Location
- 5 Preparing a Good Foundation
- 5 Hookup
- 6 240 Volt Electrical Installation
- 7 US & Canada
- 9 120 Volt Electrical Installation
- 9 Testing the 240 Volt GFCI Breaker
- 12 Priming the Pump
- 13 Operating Your Spa
- 13 NEO Control Panel Operation
- 21 ATS Plus Therapy System
- 22 (AAT)
- 22 LED Lighting
- 23 Diverter Knobs
- 23 Air Venturis
- 23 Waterfalls
- 23 Hydro Streamer Waterfall
- 24 Water Clarity
- 25 Water Testing Methods
- 26 Adding Chemicals to the Spa Water
- 28 2. Sanitation and Shock
- 29 3. Filtration
- 30 4. Regularity (Maintenance Schedule)
- 30 Generic Names for Chemicals
- 31 Common Water Chemistry Questions
- 32 Do’s and Don’ts
- 33 Bather Load
- 33 Ozonator
- 34 Troubleshooting Water Clarity Problems
- 35 Bromine Generator
- 36 Generator
- 37 System
- 37 Removing and Reseating the Pillows
- 37 Jet Removal and Replacement
- 38 Draining Your Portable Spa
- 39 Winterizing (Cold Climate Draining)
- 39 Cleaning and Replacing the Filter
- 40 Spa Cover and Locking System
- 40 Vacation Care
- 41 Cleaning Your Spa
- 41 Using the Freedom Sound System
- 42 Appendix
- 42 Replacement Parts
- 55 Basic Troubleshooting
- 57 “Thermal Creep
- 58 Limited Warranty
- 60 Warranty Registration